Pasar al contenido principal

Hidráulica fluvial y transporte de sedimentos

FJCI-2017-31781

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CORDOBA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vertically Averaged and Moment Equations for Dam-Break Wave Modeling: Shallow Water Hypotheses

  • Cantero-Chinchilla, Francisco N.
  • Gamero, Pedro
  • Castro-Orgaz, Oscar
  • Cea, Luis
  • Hager, Willi H.
  • Bergillos-Meca, Rafael Jesús|||0000-0001-8674-5043
[EN] The dam-break wave modeling technology relies upon the so-called shallow water equations (SWE), i.e., mass and momentum vertically averaged equations by implementing the shallow water hypotheses, namely (i) horizontal velocity component independent of the vertical coordinate, (ii) vertical velocity component is null, (iii) pressure distribution is hydrostatic, (iv) turbulence is neglected. While this model often yields a satisfactory answer from an engineering standpoint, flows with vertical length scales not negligible cannot be modeled with accuracy, including the undular surge generated after a dam break for relatively high tailwater levels. These flows are modeled by the Serre-Green-Naghdi equations (SGNE), which fail to mimic wave breaking for low tailwater levels, however. Neither SWE nor SGNE produce a fully satisfactory answer for modeling dam break waves, therefore. A higher-order model using vertically averaged and moment equations (VAM) is used in this work to simulate dam break waves, thereby showing good results for arbitrary values of the tailwater level. The model contains four perturbation parameters implemented to overcome the shallow water hypotheses; two for the velocity components and two for fluid pressure. The role of each parameter in relaxing the limitations of the SWE is systematically investigated, depicting a complex and necessary interplay between the dynamic component of fluid pressure and the modeling of the velocity profile in producing accurate solutions for both non-hydrostatic and broken waves in dam break flows. The results highlight how the shallow water hypotheses can be relaxed in the vertically averaged modeling of dam break waves, producing an outcome of both theoretical and practical interest in the field. The results generated are tested with available experimental data, resulting in acceptable agreement., This research was funded by the Spanish State Research Agency; project number CTM2017-85171-C2-1-R. FNCC and RB were partly funded by the Spanish Ministry of Science, Innovation and Universities through the research contracts FJCI-2016-28009 and FJCI-2017-31781, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nearshore coastal flow processes using weighted-averaged equations

  • Cantero-Chinchilla, Francisco N.
  • Castro-Orgaz, Oscar
  • Bergillos-Meca, Rafael Jesús|||0000-0001-8674-5043
[EN] This work uses the weighted residual method to simulate non-hydrostatic flows in ocean and coastal areas in a vertically-averaged framework. A Vertically-Averaged and Moment equations set is developed. The system is solved through a hybrid finite volume-finite difference numerical scheme to tackle the hyperbolic and elliptic parts of the equations. Data of seven challenging tests are used to evaluate the model ability to reproduce non-linearity, dispersion, wave breaking, bore propagation, sheet flow and wave reflection. The tests comprise propagation of sinusoidal waves over a submerged bar; convergence of the numerical scheme; solitary wave transformation over a dry reef flat, a wet reef flat and an exposed reef crest; collision of two solitary waves; and solitary wave reflection on a vertical wall under non-breaking and breaking conditions. The results highlight the accuracy of the model without prescribing any treatment for wave breaking. The conjunction of long and short waves with wave shoaling, run-up and receding flows is accurately reproduced. The model is considered an alternative tool to Boussinesq-type models to solve non-linear flows in the nearshore region, with the advantage of having an automatic mimic of wave breaking due to the field variables used to produce the weighted residual depth-averaged equations., This work was supported by the Spanish research project CTM201785171-C2-1-R. FNCC and RB were partly funded by the Spanish Ministry of Science, Innovation and Universities through Programa Juan de la Cierva 2016 (FJCI-2016-28009) and Programa Juan de la Cierva 2017 (FJCI-2017-31781), respectively. We thank the two anonymous reviewers of this work for the comments offered to improve it.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A MATLAB software platform for modelling vertically-integrated non-hydrostatic flows with moment equations

  • Gamero, Pedro
  • Cantero-Chinchilla, Francisco
  • Castro-Orgaz, Oscar
  • Bergillos-Meca, Rafael Jesús|||0000-0001-8674-5043
[EN] This work presents a software platform to compute depth-integrated non-hydrostatic coastal and open channel flows. The software is based on the Vertically-Averaged and Moment (VAM) equations model. The VAM model uses the weighted residual method to account for the non-hydrostaticity and non-uniformity of flow. After presenting the governing equations, numerical scheme and structure of the graphical user interface, the software is applied to solve coastal and open channel flow tests with significant non-hydrostaticity and non-uniformity of flow. The results are compared with hydrostatic model computations and laboratory measurements. Where a hydrostatic-based simulation poorly reproduces experimental observations, the higher-order model equations by this software platform generate excellent predictions. These findings highlight the potential of this user-friendly software platform for modeling open channel, river and nearshore flows and processes, where non-hydrostatic pressure and non-uniform velocity shall be accounted for, which entails a meaningful advance for the hydraulic community., This work was supported by the research project CTM2017-85171-C2-1-R (Secretaría de Estado de I þ D þ i, Spain) and the research group AGR-127 (Junta de Andalucía). RB and FNCC were partly funded by the Spanish Ministry of Science, Innovation and Universities through Programa Juan de la Cierva 2017 (FJCI-2017-31781) and Programa Juan de la Cierva 2016 (FJCI-2016-28009), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coastal cliff exposure and management

  • Bergillos-Meca, Rafael Jesús|||0000-0001-8674-5043
  • Rodriguez-Delgado, Cristobal
  • Medina, Luis
  • Iglesias, Gregorio
[EN] Coastal cliffs cover about 75% of the world's coastlines. Many of these cliffs suffer severe erosion problems, which are mainly caused by wave action and lead to important damages. The main objective of this work is to propose and apply a methodology to characterize and map wave exposure levels for the management of cliff coasts. The methodology proposed consists of a number of steps. First, a statistical characterization of the wave climate in deep water is performed. Second, relevant sea states are propagated towards the cliff by means of a numerical model. Then, the results are used to assess the distribution of significant wave heights and wave power along the cliff toe. Finally, four exposure levels are defined based on the wave power values at the cliff, and exposure zones are mapped accordingly along the cliff. This approach is illustrated with a case study - the Catedrales Cliffs and Beach, a tourism hotspot in Galicia (NW Spain) where erosion caused loss of human life. We find that exposure levels are primarily influenced by the nearshore bed morphology, which controls wave refraction, shoaling and breaking, as well as by the geometry and orientation of the cliff, with some parts more exposed than others to the prevailing wave direction. On the islets off the cliff the windward faces have a greater level of exposure, since the leeward faces are protected by the islets themselves and lower water depths. The rocky outcrops that occur at the cliff toe in some sections act as emerged (submerged) breakwaters under low (high) tide conditions, dissipating wave power and thus reducing wave exposure. The methodology proposed in this work enables coastal managers to prevent the personal and material damages derived from cliff erosion by focusing remedial measures where they are most needed., This work was carried out in the framework of the project "Study to establish the current geological and geotechnical situation of the natural monument Catedrales beach and its possible evolution in time", which was funded by the Xunta the Galicia (Spain) and the European Union. Rafael Bergillos was funded by the Ministerio de Ciencia Innovacion y Universidades of Spain (Programa Juan de la Cierva 2017; FJCI-2017-31781) and Cristobal Rodriguez-Delgado was partly funded by the University of Plymouth (United Kingdom). We thank four anonymous reviewers for their helpful suggestions to improve this work.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Vertically Averaged and Moment Equations for Dam-Break Wave Modeling: Shallow Water Hypotheses

  • Cantero-Chinchilla, Francisco Nicolás
  • Bergillos, Rafael J.
  • Gamero, Pedro
  • Castro Orgaz, Óscar
  • Cea, Luis
  • Hager, Willi H.
[Abstract] The dam-break wave modeling technology relies upon the so-called shallow water equations (SWE), i.e., mass and momentum vertically averaged equations by implementing the shallow water hypotheses, namely (i) horizontal velocity component independent of the vertical coordinate, (ii) vertical velocity component is null, (iii) pressure distribution is hydrostatic, (iv) turbulence is neglected. While this model often yields a satisfactory answer from an engineering standpoint, flows with vertical length scales not negligible cannot be modeled with accuracy, including the undular surge generated after a dam break for relatively high tailwater levels. These flows are modeled by the Serre–Green–Naghdi equations (SGNE), which fail to mimic wave breaking for low tailwater levels, however. Neither SWE nor SGNE produce a fully satisfactory answer for modeling dam break waves, therefore. A higher-order model using vertically averaged and moment equations (VAM) is used in this work to simulate dam break waves, thereby showing good results for arbitrary values of the tailwater level. The model contains four perturbation parameters implemented to overcome the shallow water hypotheses; two for the velocity components and two for fluid pressure. The role of each parameter in relaxing the limitations of the SWE is systematically investigated, depicting a complex and necessary interplay between the dynamic component of fluid pressure and the modeling of the velocity profile in producing accurate solutions for both non-hydrostatic and broken waves in dam break flows. The results highlight how the shallow water hypotheses can be relaxed in the vertically averaged modeling of dam break waves, producing an outcome of both theoretical and practical interest in the field. The results generated are tested with available experimental data, resulting in acceptable agreement., This research was funded by the Spanish State Research Agency; project number CTM2017-85171-C2-1-R. FNCC and RB were partly funded by the Spanish Ministry of Science, Innovation and Universities through the research contracts FJCI-2016-28009 and FJCI-2017-31781, respectively
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Nearshore coastal flow processes using weighted-averaged equations

  • Cantero-Chinchilla, Francisco Nicolás
  • Bergillos, Rafael Jesus
  • Castro-Orgaz, Oscar
This work uses the weighted residual method to simulate non-hydrostatic flows in ocean and coastal areas in a vertically-averaged framework. A Vertically-Averaged and Moment equations set is developed. The system is solved through a hybrid finite volume-finite difference numerical scheme to tackle the hyperbolic and elliptic parts of the equations. Data of seven challenging tests are used to evaluate the model ability to reproduce nonlinearity, dispersion, wave breaking, bore propagation, sheet flow and wave reflection. The tests comprise propagation of sinusoidal waves over a submerged bar; convergence of the numerical scheme; solitary wave transformation over a dry reef flat, a wet reef flat and an exposed reef crest; collision of two solitary waves; and solitary wave reflection on a vertical wall under non-breaking and breaking conditions. The results highlight the accuracy of the model without prescribing any treatment for wave breaking. The conjunction of long and short waves with wave shoaling, run-up and receding flows is accurately reproduced. The model is considered an alternative tool to Boussinesq-type models to solve non-linear flows in the nearshore region, with the advantage of having an automatic mimic of wave breaking due to the field variables used to produce the weighted residual depth-averaged equations.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

A MATLAB software platform for modelling vertically-integrated non-hydrostatic flows with moment equations

  • Gamero, Pedro
  • Bergillos, Rafael Jesús
  • Cantero-Chinchilla, Francisco Nicolás
  • Castro-Orgaz, Oscar
This work presents a software platform to compute depth-integrated non-hydrostatic coastal and open channel flows. The software is based on the Vertically-Averaged and Moment (VAM) equations model. The VAM model uses the weighted residual method to account for the non-hydrostaticity and non-uniformity of flow. After presenting the governing equations, numerical scheme and structure of the graphical user interface, the software is applied to solve coastal and open channel flow tests with significant non-hydrostaticity and non-uniformity of flow. The results are compared with hydrostatic model computations and laboratory measurements. Where a hydrostatic-based simulation poorly reproduces experimental observations, the higher-order model equations by this software platform generate excellent predictions. These findings highlight the potential of this user-friendly software platform for modeling open channel, river and nearshore flows and processes, where non-hydrostatic pressure and non-uniform velocity shall be accounted for, which entails a meaningful advance for the hydraulic community.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelización hidrodinámica del flujo sobre diques de materiales sueltos, Hydrodynamic modelling of overtopping flow over granular dikes

  • Cantero-Chinchilla, Francisco N.
  • Bergillos, Rafael J.
  • Castro-Orgaz, Óscar
[ES] Este trabajo presenta un análisis comparativo entre los últimos avances en el modelado promediado de flujos sobre diques de materiales sueltos. Entre los modelos más relevantes se encuentran: (i) modelos no hidrostáticos con transporte de sedimentos, (ii) modelos hidrostáticos con transporte de sedimentos y movimiento dinámico granular y (iii) modelos hidrostáticos con transporte de sedimentos por carga de fondo. Los tres tipos de modelos son comparados con datos experimentales para discutir su aplicabilidad. Mientras que el modelo hidrostático con transporte de sedimentos por carga de fondo presenta una solución adecuada en términos generales, el modelo no hidrostático permite mejorar la predicción del flujo en la cresta del dique, mientras que el modelo con movimiento granular dinámico permite mejorar las predicciones cerca del pie del dique. Por último, se discuten las limitaciones de los modelos., [EN] This paper presents a comparative analysis of the last advances in depth-averaged modelling of overtopping flow over granular dikes. Among the most relevant models in this field, three families of models are described: (i) non-hydrostatic models with sediment transport, (ii) hydrostatic models with sediment transport and dynamic granular beds, and (iii) hydrostatic models with sediment transport as bed-load. To study their suitability, examples of the three families of models are compared using experimental data of dike overtopping. Whilst the hydrostatic model with bed-load sediment transport shows a fair agreement with the experimental data, the results by the non-hydrostatic model produces a more accurate free surface profile up to the dike crest domain. The results by the hydrostatic model assuming dynamic bed deformation enhances the predictions near the dike toe downstream. Finally, the limitations of the models are discussed., Este trabajo ha sido financiado por el Ministerio de Ciencia, Innovación y Universidades a través del proyecto de investigación CTM2017-85171-C2-1-R, el Programa Juan de la Cierva 2016 (FJCI-2016-28009) y el Programa Juan de la Cierva 2017 (FJCI-2017-31781)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vertically Averaged and Moment Equations for Dam-Break Wave Modeling: Shallow Water Hypotheses

  • Cantero-Chinchilla, Francisco N.
  • Bergillos, Rafael J.
  • Gamero-Ojeda, Pedro
  • Castro-Orgaz, Óscar
  • Cea, Luis
  • Hager, Willi H.
The dam-break wave modeling technology relies upon the so-called shallow water equations (SWE), i.e., mass and momentum vertically averaged equations by implementing the shallow water hypotheses, namely (i) horizontal velocity component independent of the vertical coordinate, (ii) vertical velocity component is null, (iii) pressure distribution is hydrostatic, (iv) turbulence is neglected. While this model often yields a satisfactory answer from an engineering standpoint, flows with vertical length scales not negligible cannot be modeled with accuracy, including the undular surge generated after a dam break for relatively high tailwater levels. These flows are modeled by the Serre–Green–Naghdi equations (SGNE), which fail to mimic wave breaking for low tailwater levels, however. Neither SWE nor SGNE produce a fully satisfactory answer for modeling dam break waves, therefore. A higher-order model using vertically averaged and moment equations (VAM) is used in this work to simulate dam break waves, thereby showing good results for arbitrary values of the tailwater level. The model contains four perturbation parameters implemented to overcome the shallow water hypotheses; two for the velocity components and two for fluid pressure. The role of each parameter in relaxing the limitations of the SWE is systematically investigated, depicting a complex and necessary interplay between the dynamic component of fluid pressure and the modeling of the velocity profile in producing accurate solutions for both non-hydrostatic and broken waves in dam break flows. The results highlight how the shallow water hypotheses can be relaxed in the vertically averaged modeling of dam break waves, producing an outcome of both theoretical and practical interest in the field. The results generated are tested with available experimental data, resulting in acceptable agreement., This research was funded by the Spanish State Research Agency; project number CTM2017-85171-C2-1-R. FNCC and RB were partly funded by the Spanish Ministry of Science, Innovation and Universities through the research contracts FJCI-2016-28009 and FJCI-2017-31781, respectively., Peer reviewec
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A MATLAB software platform for modelling vertically-integrated non-hydrostatic flows with moment equations

  • Gamero-Ojeda, Pedro
  • Bergillos, Rafael J.
  • Cantero-Chinchilla, Francisco N.
  • Castro-Orgaz, Óscar
This work presents a software platform to compute depth-integrated non-hydrostatic coastal and open channel flows. The software is based on the Vertically-Averaged and Moment (VAM) equations model. The VAM model uses the weighted residual method to account for the non-hydrostaticity and non-uniformity of flow. After presenting the governing equations, numerical scheme and structure of the graphical user interface, the software is applied to solve coastal and open channel flow tests with significant non-hydrostaticity and non-uniformity of flow. The results are compared with hydrostatic model computations and laboratory measurements. Where a hydrostatic-based simulation poorly reproduces experimental observations, the higher-order model equations by this software platform generate excellent predictions. These findings highlight the potential of this user-friendly software platform for modeling open channel, river and nearshore flows and processes, where non-hydrostatic pressure and non-uniform velocity shall be accounted for, which entails a meaningful advance for the hydraulic community., This work was supported by the research project CTM2017-85171-C2-1-R (Secretaría de Estado de I + D + i, Spain) and the research group AGR-127 (Junta de Andalucía). RB and FNCC were partly funded by the Spanish Ministry of Science, Innovation and Universities through Programa Juan de la Cierva 2017 (FJCI-2017-31781) and Programa Juan de la Cierva 2016 (FJCI-2016-28009), respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nearshore coastal flow processes using weighted-averaged equations

  • Cantero-Chinchilla, Francisco N.
  • Bergillos, Rafael J.
  • Castro-Orgaz, Óscar
This work uses the weighted residual method to simulate non-hydrostatic flows in ocean and coastal areas in a vertically-averaged framework. A Vertically-Averaged and Moment equations set is developed. The system is solved through a hybrid finite volume-finite difference numerical scheme to tackle the hyperbolic and elliptic parts of the equations. Data of seven challenging tests are used to evaluate the model ability to reproduce non-linearity, dispersion, wave breaking, bore propagation, sheet flow and wave reflection. The tests comprise propagation of sinusoidal waves over a submerged bar; convergence of the numerical scheme; solitary wave transformation over a dry reef flat, a wet reef flat and an exposed reef crest; collision of two solitary waves; and solitary wave reflection on a vertical wall under non-breaking and breaking conditions. The results highlight the accuracy of the model without prescribing any treatment for wave breaking. The conjunction of long and short waves with wave shoaling, run-up and receding flows is accurately reproduced. The model is considered an alternative tool to Boussinesq-type models to solve non-linear flows in the nearshore region, with the advantage of having an automatic mimic of wave breaking due to the field variables used to produce the weighted residual depth-averaged equations., This work was supported by the Spanish research project CTM2017-85171-C2-1-R. FNCC and RB were partly funded by the Spanish Ministry of Science, Innovation and Universities through Programa Juan de la Cierva 2016 (FJCI-2016-28009) and Programa Juan de la Cierva 2017 (FJCI-2017-31781), respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Vertically-Averaged Coastal Flow Modelling Using Moment Equations

  • Cantero-Chinchilla, Francisco N.
  • Bergillos, Rafael J.
  • Castro-Orgaz, Óscar
Editors: José María Carrillo, Eva Fenrich, David Ferràs, Silke Wieprecht.-- Trabajo presentado en el 1st IAHR Young Professionals Congress, celebrado onlien el 17 y 18 de noviembre de 2020., Among the available type of models in the literature, the vertically-averaged modelling of coastal flow processes is frequently accomplished resorting to Boussinesq-type equations. These models account for non-hydrostatic flow effects through the inclusion of dispersive extra terms in the governing equations, demanding high numerical accuracy while implementing the discrete form of derivatives in these extra terms. An useful alternative to Boussinesq-type models are the Vertically-Averaged and Moment (VAM) equations, where the extra degrees of freedown are mathematically closed in a Galerkin-type framework. This work presents the evaluation ofa VAM model for simulating complex one-dimensional coastal flows. A challenging test comprising non-linear wave propagation, wave breaking, bore propagation and reflection is selected. The accuracy of the results as compared to the experimental data highlights the utility of VAM models as alternative tools to Boussinesq-type models in coastal flow modelling., This work wassupported by the research project CTM2017-85171-C2-1-R (State Research Agency, Spain) and the research group AGR-127. RB and FNCC were partly funded by the Spanish Ministry of Science, Innovation and Universities through research contracts FJCI-2017-31781and FJCI-2016-28009, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Vertically-Integrated and Moment Equations For Non-Hydrostatic Flow Modelling Matlab Platform

  • Gamero-Ojeda, Pedro
  • Bergillos, Rafael J.
  • Cantero-Chinchilla, Francisco N.
  • Castro-Orgaz, Óscar
Editors: José María Carrillo, Eva Fenrich, David Ferràs, Silke Wieprecht.-- Trabajo presentado en el 1st IAHR Young Professionals Congress, celebrado onlien el 17 y 18 de noviembre de 2020., The majority of the software platforms designed for non-hydrostatic shallow water flow modelling rely on the solution of computational-costly three-dimensional flow models or depth-averaged Boussinesq-type models that require optimization of dispersive terms. In this field, an unexplored but reliable alternative is the Vertically-Averaged and Moment (VAM) equations model. This work presents a MATLAB software platform for one-dimensional non-hydrostatic flow modelling using the VAM model. First, the VAM governing equations are introduced, whichuse the weighted residual method to account for the non-hydrostatic and non-uniform characteristics of flow. Then, the structure of the user-friendly graphical interface is described. Finally, the model is applied to two nearshore and open-channel non-hydrostatic flow tests. The comparison of the results with experimental data highlights the accuracy of the VAM model and the potential of the present software for modelling non-hydrostatic flows., This work was supported by the research project CTM2017-85171-C2-1-R (State Research Agency, Spain) and the research group AGR-127. RB and FNCC were partly funded by the Spanish Ministry of Science, Innovation and Universities through research contracts FJCI-2017-31781 and FJCI-2016-28009, respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Connecting research infrastructures, scientific and sectorial networks to support integrated management of mediterranean coastal and rural areas

  • Martínez-López, Javier
  • Bergillos, Rafael J.
  • Bonet, Francisco J.
  • de Vente, Joris
Many Mediterranean coastal areas encounter similar problems and gaps between science, governance, and implementation of sustainable management at local-regional scales. There is often a lack of coordination between management of inland and coastal areas, and a lack of integrated land-sea data and knowledge exchange to support transitions towards sustainable development and synergies between rural and coastal areas. In this paper, we illustrate the main challenges to reach a sustainable development of coastal-rural areas related to data availability, knowledge exchange and governance, which could be tackled by coupling regional and international research infrastructures (RIs) with scientific and stakeholder collaboration networks to facilitate knowledge exchange and co-creation of solutions.Wefirst identified the main challenges in sustainable development of coastal-rural areas followed by a review of major existing RIs, scientific knowledge and collaboration networks that can help support integrated management of Mediterranean coastal zones. Based on this, we developed recommendations for a better integration of RIs and collaboration networks in the management of coastal-rural areas, including (1) the creation of local networks to facilitate periodical meetings between all sectors involved and to connect science and policy actors and (2) setting up local RIs that support the data processing and the use of regional and international RIs by scientists and policy stakeholders., This article has received funding from the European Union's H2020 research and innovation programme under grant agreement No 773782 'COASTAL: Collaborative Land Sea inTegration Platform' and Horizon 2020 Grant Number 654131 'COOP+: Cooperation of research infrastructures to address global challenges in the environmental field'. R B was partly funded by the Spanish Ministry of Science, Innovation and Universities (Programa Juan de la Cierva 2017, FJCI-2017-31781).