Pasar al contenido principal

Modelling in computational mechanics: damage models in composite materials

FJCI-2017-34910

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Machinability of Carbon Fiber Composite Materials in Function of Tool Wear and Cutting Parameters Using the Artificial Neural Network Approach

  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Muñoz-Sánchez, A.
  • Diaz-Alvarez, A.
  • Loya, J.A.
[EN] Local delamination is the most undesirable damage associated with drilling carbon fiber reinforced composite materials (CFRPs). This defect reduces the structural integrity of the material, which affects the residual strength of the assembled components. A positive correlation between delamination extension and thrust force during the drilling process is reported in literature. The abrasive effect of the carbon fibers modifies the geometry of the fresh tool, which increases the thrust force and, in consequence, the induced damage in the workpiece. Using a control system based on an artificial neural network (ANN), an analysis of the influence of the tool wear in the thrust force during the drilling of CFRP laminate to reduce the damage is developed. The spindle speed, feed rate, and drill point angle are also included as input parameters of the study. The training and testing of the ANN model are carried out with experimental drilling tests using uncoated carbide helicoidal tools. The data were trained using error-back propagation-training algorithm (EBPTA). The use of the neural network rapidly provides results of the thrust force evolution in function of the tool wear and cutting parameters. The obtained results can be used by the industry as a guide to control the impact of the wear of the tool in the quality of the finished workpiece., The Ministry of Economy and Competitiveness of Spain, projects DPI2017-89197-C2-1-R and DPI2017-89197-C2-2-R] and the Ministry of Science, Innovation and Universities, grant number [FJCI-2017-34910], funded this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-objective optimization analysis of cutting parameters when drilling composite materials with special geometry drills

  • Feito-Sánchez, Norberto|||0000-0001-7330-6404
  • Muñoz-Sánchez, A.
  • Diaz-Alvarez, A.
  • Miguelez, M. H.
[EN] The cutting tool geometry is strongly influencing damage induced during drilling of composite materials. The searching of new and optimum geometries reducing the damage on the laminates is still a challenge for the scientific community and industry. This study focuses on drilling woven CFRP laminates with four different tool geometries, analyzing the influence of the cutting parameters on the cutting forces and delamination damage. The work is divided in three phases; the first phase carries out a full factorial design of experiments conducted to quantify the significance of each process parameter as well as its interaction, on the generation of delamination at the hole entry and exit as well as the thrust force and torque. The second phase uses the response surface methodology (RSM) to establish the relationships between each output variable and the input variables based on ANOVA results. Finally, a multi-objective optimization strategy has been presented using the fitting equations to select optimum ranges of design parameters that can minimize collectively the aforementioned output variables. Ultimate objective is the process improvement toward negligible defects during drilling of woven CFRP composites., The researchers are indebted to the Ministerio de Economía y Empresa de España (Projects DPI2017-89197-C2-1-R and DPI2017- 89197-C2-2-R) for the financial support which permitted to conduct part of this work as well as the Ministerio the Ciencia, Innovación y Universidades (Juan de la Cierva program with the reference FJCI2017-34910)