Pasar al contenido principal

PARTICIPACION DEL IGIC EN LOS TELESCOPIOS DE NEUTRINOS ANTARES Y KM3NET

FPA2009-13983-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

R&amp, D studies for the development of a compact transmitter able to mimic the acousticsignature of a UHE neutrino interaction

  • Ardid, Miguel|||0000-0002-3199-594X
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Ferri García, Marcelino
  • Adrián Martínez, Silvia
  • Bou Cabo, Manuel
  • Larosa, Giuseppina
  • Martínez Mora, Juan Antonio
[EN] Calibration of acoustic neutrino telescopes with neutrino-like signals is essential to evaluate the feasibility of the technique and to know the efficiency of the detectors. However, it is not straightforward to have acoustic transmitters that, on one hand, are able to mimic the signature of a UHE neutrino interaction, that is, a bipolar acoustic pulse with the 'pancake' directivity, and on the other hand, fulfil practical issues such as ease of deployment and operation. This is a non-trivial problem since it requires directive transducer with cylindrical symmetry for a broadband frequency range. Classical solutions using linear arrays of acoustic transducers result in long arrays with many elements, which increase the cost and the complexity for deployment and operation. In this paper we present the extension of our previous R&D studies using the parametric acoustic source technique by dealing with the cylindrical symmetry and demonstrating that it is possible to use this technique for having a compact solution that could be much more easily included in neutrino telescope infrastructures or used in specific sea campaigns for calibration. © 2010 Elsevier B.V., This work has been supported by the Ministerio de Ciencia e Innovacio´n (Spain Government), project references FPA2007- 63729, FPA2009-13983-C02-02, ACI2009-1067 and ConsoliderIngenio Multidark (CSD2009-00064). It has also being funded by Generalitat Valenciana, Prometeo/2009/26.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic Transmitters for Underwater Neutrino Telescopes

  • Ardid, Miguel|||0000-0002-3199-594X
  • Llorens Alvarez, Carlos David|||0000-0002-6675-3596
  • Martínez Mora, Juan Antonio
  • Bou Cabo, Manuel
  • Larosa ., Giuseppina
  • Adrián Martínez, Silvia
In this paper acoustic transmitters that were developed for use in underwater neutrino telescopes are presented. Firstly, an acoustic transceiver has been developed as part of the acoustic positioning system of neutrino telescopes. These infrastructures are not completely rigid and require a positioning system in order to monitor the position of the optical sensors which move due to sea currents. To guarantee a reliable and versatile system, the transceiver has the requirements of reduced cost, low power consumption, high pressure withstanding (up to 500 bars), high intensity for emission, low intrinsic noise, arbitrary signals for emission and the capacity of acquiring and processing received signals. Secondly, a compact acoustic transmitter array has been developed for the calibration of acoustic neutrino detection systems. The array is able to mimic the signature of ultra-high-energy neutrino interaction in emission directivity and signal shape. The technique of parametric acoustic sources has been used to achieve the proposed aim. The developed compact array has practical features such as easy manageability and operation. The prototype designs and the results of different tests are described. The techniques applied for these two acoustic systems are so powerful and versatile that may be of interest in other marine applications using acoustic transmitters. © 2012 by the authors; licensee MDPI, Basel, Switzerland., This work has been supported by the Ministerio de Ciencia e Innovacion (Spanish Government), project references FPA2009-13983-C02-02, ACI2009-1067, AIC10-D-00583, Consolider-Ingenio Multidark (CSD2009-00064). Authors Manuel Bou-Cabo and Silvia Adrian-Martinez thank Multidark for the fellowships. The work has also been funded by Generalitat Valenciana, Prometeo/2009/26, and the European 7th Framework Programme, Grant No. 212525.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A compact acoustic calibrator for ultra-high energy neutrino detection

  • Adrián Martínez, Silvia
  • Bou Cabo, Manuel
  • Larosa, Giuseppina
  • Martínez Mora, Juan Antonio
  • Ardid, Miguel|||0000-0002-3199-594X
  • Llorens Alvarez, Carlos David|||0000-0002-6675-3596
With the aim to optimize and test the method of acoustic detection of ultra-high energy neutrinos in underwater telescopes a compact acoustic transmitter array has been developed. The acoustic parametric effect is used to reproduce the acoustic signature of an ultra-high-energy neutrino interaction. Different R&D studies are presented in order to show the viability of the parametric sources technique to deal with the difficulties of the acoustic signal generation: a very directive transient bipolar signal with 'pancake' directivity. The design, construction and characterization of the prototype are described, including simulation of the propagation of an experimental signal, measured in a pool, over a distance of 1 km. Following these studies, next steps will be testing the device in situ, in underwater neutrino telescope, or from a vessel in a sea campaign. (c) 2012 Elsevier B.V. All rights reserved., This work has been supported by the Ministerio de Ciencia e Innovacion (Spanish Government), project references FPA2009-13983-C02-02, ACI2009-1067, Consolider-Ingenio Multidark (CSD2009-00064). It has also been funded by Generalitat Valenciana, Prometeo/2009/26.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The sound emission board of the KM3NeT acousticpositioning system

  • Llorens Alvarez, Carlos David|||0000-0002-6675-3596
  • Ardid, Miguel|||0000-0002-3199-594X
  • Sogorb Devesa, Tomás|||0000-0003-2418-8901
  • Bou Cabo, Manuel
  • Martínez Mora, Juan Antonio
  • Larosa, Giuseppina
  • Adrián Martínez, Silvia
[EN] We describe the sound emission board proposed for installation in the acoustic positioning system of the future KM3NeT underwater neutrino telescope. The KM3NeT European consortium aims to build a multi-cubic kilometre underwater neutrino telescope in the deep Mediterranean Sea. In this kind of telescope the mechanical structures holding the optical sensors, which detect the Cherenkov radiation produced by muons emanating from neutrino interactions, are not completely rigid and can move up to dozens of meters in undersea currents. Knowledge of the position of the optical sensors to an accuracy of about 10 cm is needed for adequate muon track reconstruction. A positioning system based on the acoustic triangulation of sound transit time differences between fixed seabed emitters and receiving hydrophones attached to the kilometre-scale vertical flexible structures carrying the optical sensors is being developed. In this paper, we describe the sound emission board developed in the framework of KM3NeT project, which is totally adapted to the chosen FFR SX30 ultrasonic transducer and fulfils the requirements imposed by the collaboration in terms of cost, high reliability, low power consumption, high acoustic emission power for short signals, low intrinsic noise and capacity to use arbitrary signals in emission mode., This work was supported by the European Commission through the KM3NeT Design Study (FP6, contract no. DS 011937) and Preparatory Phase (FP7, grant no. 212525) and also by the Ministerio de Ciencia e Innovacion (Spanish Government), project references FPA2009-13983-C02-02, ACI2009-1067, Consolider-Ingenio Multidark (CSD2009-00064). It was also funded by Generalitat Valenciana, Prometeo/2009/26.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of an acoustic transceiver for the KM3NeT positioning system

  • Larosa, Giuseppina
  • Bou Cabo, Manuel
  • Martínez Mora, Juan Antonio
  • Adrián Martínez, Silvia
  • Ardid, Miguel|||0000-0002-3199-594X
  • Llorens Alvarez, Carlos David|||0000-0002-6675-3596
  • KM3NeT Consortium
[EN] In this paper we describe an acoustic transceiver developed for the KM3NeT positioning system. The acoustic transceiver is composed of a commercial free flooded transducer, which works mainly in the 20-40 kHz frequency range and withstands high pressures (up to 500 bars). A sound emission board was developed that is adapted to the characteristics of the transducer and meets all requirements: low power consumption, high intensity of emission, low intrinsic noise, arbitrary signals for emission and the capacity of acquiring the receiving signals with very good timing precision. The results of the different tests made with the transceiver in the laboratory and shallow sea water are described, as well as, the activities for its integration in the Instrumentation Line of the ANTARES neutrino telescope and in a NEMO tower for the in situ tests. © 2012 Elsevier B.V. All rights reserved., This work has been supported by the Ministerio de Ciencia e Innovacion (Spanish Government), Project references FPA2009-13983-C02-02, ACI2009-1067, AIC10-D-00583, and Consolider-Ingenio Multidark (CSD2009-00064). It has also been funded by Generalitat Valenciana, Prometeo/2009/26, and the European 7th Framework Programme, Grant no. 212525.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic position calibration of the KM3NeT neutrino telescope

  • Larosa, Giuseppina
  • Ardid, Miguel|||0000-0002-3199-594X
  • KM3NeT Consortium
[EN] KM3NeT is a future neutrino telescope with a volume of several cubic kilometres at the bottom of the Mediterranean Sea. It will be composed of at least 300 vertical structures of several hundred metres length, named detection units (DU), anchored on the seabed and kept vertical with a buoy. The DU will host optical sensors able to detect the faint Cherenkov light emitted in the deep sea by charged particles originating from collisions of the neutrinos with nuclei in the sea water or the rock below. A precise knowledge of the optical sensor positions relative to each other, not worse than 20 cm, is needed for an accurate reconstruction of the charged particle tracks. Since the marine currents cause movements of the DUs and thus a displacement of the optical sensors of up to several tens of metres from their nominal positions, an Acoustic Positioning System (APS) is necessary to monitor their positions in deep sea. The KM3NeT APS will be composed of acoustic transceivers at fixed positions on the sea floor and acoustic receivers (hydrophones) along each DU. The hydrophone positions are determined by triangulation using the travel times of acoustic signals between emitters and receivers. This paper presents the acoustic positioning system designed for KM3NeT and in particular the innovative technologies used for transducers, electronics, and signal processing. (C) 2012 Elsevier B.V. All rights reserved., This work has been supported by the Ministerio de Ciencia e Innovación (Spanish Government), project references FPA2009-13983-C02-02, ACI2009-1067, AIC10-D-00583, Consolider-Ingenio Multidark (CSD2009-00064). It has also been funded by Generalitat Valenciana, Prometeo/2009/26, and the European 7th Framework Programme, Grant no. 212525.