Pasar al contenido principal

INVESTIGACION Y DESARROLLO DE LA ELECTRONICA DE FRONT-END DE LOS ARRAYS DE GE DE HISPEC (AGATA) Y DESPEC

FPA2012-33650

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conceptual design of the early implementation of the NEutron Detector Array (NEDA) with AGATA

  • Huyuk, T.
  • Di Nitto, Antonio
  • Jaworski, Grzegorz
  • Gadea, Andres
  • Valiente-Dobón, Jose Javier
  • Nyberg, Johan
  • Palacz, Marcin
  • Soderstrom, Par-Anders
  • de Angelis, Giacomo
  • Atac, Ayse
  • Collado, Javier
  • Domingo-Pardo, Cesar
  • Egea, Francisco Javier
  • Erduran, Nizamettin
  • Aliaga, Ramón J.|||0000-0002-2513-7711
  • Gadea Gironés, Rafael|||0000-0003-2857-8667
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
[EN] The NEutron Detector Array (NEDA) project aims at the construction of a new high-efficiency compact neutron detector array to be coupled with large gamma-ray arrays such as AGATA. The application of NEDA ranges from its use as selective neutron multiplicity filter for fusion-evaporation reaction to a large solid angle neutron tagging device. In the present work, possible configurations for the NEDA coupled with the Neutron Wall for the early implementation with AGATA has been simulated, using Monte Carlo techniques, in order to evaluate their performance figures. The goal of this early NEDA implementation is to improve, with respect to previous instruments, efficiency and capability to select multiplicity for fusion-evaporation reaction channels in which 1, 2 or 3 neutrons are emitted. Each NEDA detector unit has the shape of a regular hexagonal prism with a volume of about 3.23 l and it is filled with the EJ301 liquid scintillator, that presents good neutron-gamma discrimination properties. The simulations have been performed using a fusion-evaporation event generator that has been validated with a set of experimental data obtained in the Ni-58 + Fe-56 reaction measured with the Neutron Wall detector array., This work was partially supported by MINECO, Spain, under the grants FPA2011-29854-C04, FPA2012-33650 and FPA2014-57196-C5, and Generalitat Valenciana, Spain, under the grants PROMETEO/2010/101 and PROMETEOII/2014/019, The European Regional Development Fund (FEDER) of European Commission, the Swedish Research Council, the Polish National Science Centre under contracts: 801/N-COPIN/2010/0 (COPIN/IN2P3 collaboration), UM0-2014/14/M/ST2/00738 (COPIN-INFN collaboration), UM0-2013/08/M/ST2/0025 (LEA-COPIGAL collaboration), the Scientific and Technological Council of Turkey (Proj. no. 106T055 and 114F473), and the UK STFC (ST/L005727/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conceptual design of the TRACE detector readout using a compact, dead time-less analog memory ASIC

  • Aliaga, Ramón J.|||0000-0002-2513-7711
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Gadea Gironés, Rafael|||0000-0003-2857-8667
  • Capra, S.
  • Pullia, A.
  • Dueñas, J. A.
  • Grassi, L.
  • Triossi, A.
  • Domingo Pardo, C.
  • González, V.
  • Hüyük, T.
  • Sanchís, E.
  • Gadea, A.
  • Mengoni, D.
[EN] The new TRacking Array for light Charged particle Ejectiles (TRACE) detector system requires monitorization and sampling of all pulses in a large number of channels with very strict space and power consumption restrictions for the front-end electronics and cabling. Its readout system is to be based on analog memory ASICs with 64 channels each that sample a View the MathML source window of the waveform of any valid pulses at 200 MHz while discarding any other signals and are read out at 50 MHz with external ADC digitization. For this purpose, a new, compact analog memory architecture is described that allows pulse capture with zero dead time in any channel while vastly reducing the total number of storage cells, particularly for large amounts of input channels. This is accomplished by partitioning the typical Switched Capacitor Array structure into two pipelined, asymmetric stages and introducing FIFO queue-like control circuitry for captured data, achieving total independence between the capture and readout operations., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under Grants FPA2012-33650 and FPA2011-29854-C04, and by the Generalitat Valenciana, Spain, under Grant PROMETEOII/2014/019.