Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of acoustic reciprocity and conservativeness in exhaust aftertreatment systems

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Guilain, S.
  • Dubarry, M.
[EN] Tightening emission standards limiting gas and aerosol emissions from internal combustion engines have led to the extensive use of exhaust aftertreatment systems (EATS) with different chemical functions as a solution to meet standards requirements. Incidentally, the placement of aftertreatment monolithic devices into the exhaust line also plays a key role on the exhaust noise emission. Their presence disturbs the pattern of the pressure waves and sets the boundary conditions for the silencer design. The impact of the EATS on wave transmission can be analyzed by means of the transmission or scattering matrix. The present work discusses the implications of acoustic reciprocity and conservativeness on the definition of the scattering matrix elements. The fulfillment of these properties in real operating conditions was evaluated against a set of experimental data obtained for several exhaust aftertreatment monolithic bricks in an impulse test rig. The influence of different excitation amplitudes and superimposed mean flows was also considered. Once it was shown that the devices are reciprocal, the need to account for dissipation phenomena was evidenced. Finally, the application of reciprocity and conservativeness together with dissipation provided simple expressions allowing to predict the response of the EATS in the inverse direction, i.e. from outlet to inlet, from the transmission and reflection properties obtained in the direct direction. Thus, the proposed procedure becomes useful to reduce both the required number of tests and the gas dynamics modelling work in methodologies driven to assess the acoustic response of EATS based on the use of experimental and computational tools. (C) 2018 Elsevier Ltd. All rights reserved., This research has been partially supported by FEDER and the Government of Spain through project TRA2016-79185-R. Additionally, the Ph.D. student Enrique José Sanchis has been funded by a grant from Universitat Politècnica de València with reference FPI-2016-S2-1355.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Impact of Particulate Matter Distribution on Pressure Drop of Wall-Flow Particulate Filters

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
[EN] Wall-flow particulate filters are a required exhaust aftertreatment system to abate particulate matter emissions and meet current and incoming regulations applying worldwide to new generations of diesel and gasoline internal combustion engines. Despite the high filtration efficiency covering the whole range of emitted particle sizes, the porous substrate constitutes a flow restriction especially relevant as particulate matter, both soot and ash, is collected. The dependence of the resulting pressure drop, and hence the fuel consumption penalty, on the particulate matter distribution along the inlet channels is discussed in this paper taking as reference experimental data obtained in water injection tests before the particulate filter. This technique is demonstrated to reduce the particulate filter pressure drop without negative effects on filtration performance. In order to justify these experimental data, the characteristics of the particulate layer are diagnosed applying modeling techniques. Different soot mass distributions along the inlet channels are analyzed combined with porosity change to assess the new properties after water injection. Their influence on the subsequent soot loading process and regeneration is assessed. The results evidence the main mechanisms of the water injection at the filter inlet to reduce pressure drop and boost the interest for control strategies able to force the re-entrainment of most of the particulate matter towards the inlet channels' end., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through Grant No. TRA2016-79185-R. Additionally, the Ph.D. student Enrique Jose Sanchis has been funded by a grant from Universitat Politecnica de Valencia with the reference FPI-2016-S2-1355.