Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental assessment and validation of an oil ferrous wear debris sensors family for wind turbine gearboxes

  • Macian Martinez, Vicente
  • Miró Mezquita, Guillermo
  • Rodes, Isaac
  • Tormos, B.|||0000-0002-8852-3783
[EN] Purpose - The purpose of this study was to perform a complete experimental assessment of a family of oil ferrous wear debris sensor is performed. The family comprised the original sensor and its re-engineered evolution, which is capable of detecting both amount and size of wear debris particles trapped by the sensor and some predefined oil condition properties. Design/methodology/approach ¿ In this work, the first step was to perform a design of experiments for the sensor validation. A specially defined test rig was implemented, and different ferrous wear debris was collected. For each sensor, two different tests were performed. The first test was called a ¿void test¿, where quantified amounts of debris were collided with the sensor without oil. The second one was a dynamic test, where the sensor was installed in the test rig and different amounts of wear debris were added at a constant rate. In addition, specific tests related with oil properties detection were studied. Findings ¿ The results show excellent correlation of the sensor output signal with the amount of wear debris and a satisfactory detection of debris size in all ranges. Also, the dynamic test presented adequate representativeness, and sensors performed well in this scenario. Practical implications ¿ This paper shows the practical implementation of this type of sensor and the usual detection range and rate of detection for different debris size and quantities. Originality/value ¿ This work has a great utility for maintenance managers and equipment designers to fully understand the potential of this type of sensor and its suitability for the application required., Authors would like to thank Iberdrola Generacion S.A. for their support in this project and Universitat Politecnica de Valencia for its support through contract FPI-S2-2015-1065 of Programa de Apoyo para la Investigacion y Desarrollo (PAID). Additionally, the authors would like to especially thank Daniel Veintimilla for their help in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Current trends in ICE wear detection technologies: from lab to field

  • Miró Mezquita, Guillermo
  • Allmaier, H.
  • Sander, D.E.
  • Knauder, C.
  • Tormos, B.|||0000-0002-8852-3783
[EN] Research in internal combustion engine (ICE) tribology has been an active topic during the last decades, driven by different interest: first, in order to improve thermodynamics and overall engine performance, while nowadays there is an interest in reducing engine losses, including friction, in order to cut down fuel consumption and also exhaust emissions. Tribology is a tri-vector science, where friction is the fundamental phenomena occurring between two surfaces, wear is the consequence of the occurrence of friction and lubrication is the solution for diminish friction and eliminate wear presence in the tribological system. During the development of ICE, different technologies and techniques have been applied for detection of ICE wear, focused in different parts of the engine life and also used for different purposes, including research or maintenance. In this work, a comprehensive look on this field is done, where several techniques are explained and their main application and pros and cons are highlighted., CMT-Motores Térmicos would like to thank the Spanish Ministerio de Ciencia e Innovación for its funding (Project no. TRA2015-70785-R) and Universitat Politècnica de València for its support through contract FPI-S2-2015-1065 of Programa de Apoyo para la Investigación y Desarrollo (PAID). The virtual vehicle research center acknowledges the financial support of the Austrian Science Fund (FWF): P27806-N30. Partial support was obtained from the "COMET - Competence Centers for Excellent Technologies Programme" of the Austrian Federal Ministry for Transport, Innovation and Technology (bmvit), the Austrian Federal Ministry of Science, Research and Economy (bmwfw), the Austrian Research Promotion Agency (FFG), the Province of Styria and the Styrian Business Promotion Agency (SFG).