Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparison of different thermodynamic databases used in a geothermometrical modelling calculation

  • Blasco, M.
  • Gimeno, M.J.
  • Auqué, L.F.
Different thermodynamic databases usually have common thermodynamic data for some minerals or aqueous species, but in many cases they present important differences. Four different thermodynamic databases (WATEQ4F, LLNL, DATA0.YMP.R5 and SOLTHERM) have been used in a geothermometrical modelling problem and they are compared in this work. The main differences found in the thermodynamic data are related to the order, degree, crystallinity and composition of the considered aluminosilicate phases and the effects of these properties in the experimental, or theoretical, data used for the fitting of the equilibrium constant at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Application of different geothermometrical techniques to a low enthalpy thermal system

  • Blasco, M.
  • Auqué, L.F.
  • Gimeno, M.J.
The reservoir temperature of the waters in the low temperature carbonate-evaporitic geothermal system of Arnedillo has been estimated by using two different techniques: 1) chemical geothermometers and 2) geothermometrical modelling. By combining the results of both techniques a reliable range of temperature of 90 ± 20 oC has been proposed for the waters in the reservoir. Despite being a carbonate-evaporitic system, the cationic geothermometers have provided good results, which, together with the geothermometrical modelling, indicate that the waters have reached equilibrium with anhydrite, quartz, calcite, dolomite, albite and K-feldspar in the reservoir.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Estudio geotermométrico de las aguas termales ricas en CO2 del acuífero de La Ermita del Saladillo (Murcia)

  • Blasco Castellón, Mónica
  • Auqué, Luis F.
  • Gimeno, María J.
Las aguas del acuífero carbonatado de La Ermita del Saladillo representan una de las manifestaciones termales de aguas ricas en CO2 del sureste de la Península Ibérica. En este tipo de sistemas, la aplicación de las técnicas geotermométricas puede presentar problemas y por ello, en este trabajo se han verificado los resultados obtenidos mediante distintos geotermómetros en dos muestras de agua tomadas en este acuífero termal a partir de sondeos. Los geotermómetros catiónicos sobreestiman las temperaturas del reservorio ya que las aguas no parecen haber alcanzado los equilibrios en los que se basan esas técnicas. Sin embargo, los geotermómetros Ca-Mg y anhidrita – calcedonia, de uso en sistemas carbonatado – evaporíticos no carbónicos proporcionan resultados coherentes en las aguas estudiadas ricas en CO2. También el geotermómetro SiO2-calcedonia ha proporcionado resultados satisfactorios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Geochemistry, geothermometry and influence of the concentration of mobile elements in the chemical characteristics of carbonate-evaporitic thermal systems. The case of the Tiermas geothermal system (Spain)

  • Blasco, Mónica
  • Auqué, Luis F.
  • Gimeno, María J.
  • Acero, Patricia
  • Asta, María P.
The Tiermas low temperature geothermal system, hosted in the Paleocene-Eocene carbonates of the Jaca-Pamplona basin, has been studied to evaluate the geochemistry and the temperature of the waters in the deep reservoir. These waters are of chloride-sodium type and emerge with a temperature of about 37 °C. Two hydrogeochemical groups of waters have been distinguished: one with lower sulphate concentration and lower TDS (about 7500 ppm) and the other with higher sulphate content and TDS values (close to 11,000 ppm). There are also slight differences in the reservoir temperature estimated for each group. These temperatures have been determined by combining several geothermometrical techniques: (1) classical chemical geothermometers (SiO2- quartz, Na-K, K-Mg and Na-K-Ca), (2) specific geothermometers for carbonate systems (Ca-Mg), (3) isotopic geothermometers and, (4) geothermometrical modelling. The good agreement in the temperature obtained by these techniques, including the cationic geothermometers which are not usually considered suitable for this type of systems, allows establishing a reliable range of temperature of 90 ± 20 °C for the low-sulphate waters and 82 ± 15 °C for the high-sulphate waters. The mineral assemblage in equilibrium in the reservoir is assumed to be the same for both groups of waters (calcite, dolomite, quartz, anhydrite, albite, K-feldspar and other aluminosilicate phases); therefore, the differences found in the reservoir temperature and, mostly, in the geochemical characteristics of each group of waters must be due to the existence of two flow paths, with slightly different temperatures and intensity of water-rock interaction. Anhydrite is at equilibrium in the reservoir suggesting that, although this system is hosted in carbonates, evaporites may also be present. The dissolution of halite (and the consequent increase in the chloride concentration) conditions the chemical characteristics of the waters and the equilibrium situations in the reservoir and waters acquire their chloride-sodium affinity at depth and not during their ascent to the surface. Finally, a favourable tectonic structure for CO2 storage has been recognised in the Paleocene-Eocene carbonates of this area. Therefore, considering the characteristics of these waters (in equilibrium with calcite, dolomite and anhydrite in the reservoir), the results of this work are useful to understand some of the geochemical processes that might take place during the CO2 injection: 1) precipitation of carbonates and sulphates in the vicinity of the injection well due to desiccation of the waters and, 2) carbonate dissolution and sulphate precipitation in the long term.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mineral equilibria and thermodynamic uncertainties in the geothermometrical characterisation of carbonate geothermal systems of low temperature. The case of the Alhama-Jaraba system (Spain)

  • Blasco, Mónica
  • Auqué, Luis F.
  • Gimeno, María J.
  • Acero, P.
  • Gómez, J.
  • Asta, Maria, P.
Geothermometrical characterisation of low-temperature, carbonate-evaporitic geothermal systems is usually hampered by the lack of appropriate mineral equilibria to successfully use most of the classical geothermometers and/or by the thermodynamic uncertainties affecting some of the most probable mineral equilibria in low temperature conditions. This situation is further hindered if the thermal waters are additionally affected by secondary processes (e.g., CO2 loss) during their ascent to surface. All these problems cluster together in the low-temperature Alhama-Jaraba thermal system, hosted in carbonate rocks, with spring temperatures about 30 °C and waters of Ca-Mg−HCO3/SO4 type. This system, one of the largest naturally flowing (600 L/s) low temperature thermal systems in Europe, is used in this paper as a suitable frame to assess the problems in the application of chemical geothermometrical techniques (classical geothermometers and geothermometrical modelling) and to provide a methodology that could be used in this type of geothermal system or in potential CO2 storage sites in similar aquifers. The results obtained have shown that the effects of the secondary processes can be avoided by selecting the samples unaffected by such processes and, therefore, representative of the conditions at depth, or by applying existing methodologies to reconstruct the original composition, as is usually done for medium to high temperature systems. The effective mineral equilibria at depth depend on the temperature, the residence time and the specific lithological/mineralogical characteristics of the system studied. In the present case, the mineral equilibria on which classical cation geothermometers are based have not been attained. The low proportion of evaporitic minerals in the hosting aquifer prevents the system from reaching anhydrite equilibrium, otherwise common in carbonate-evaporitic systems and necessary for the specific SO4-F geothermometer or the specially reliable quartz (or chalcedony) – anhydrite equilibrium in the geothermometrical modelling of these geothermal systems. Under these circumstances, the temperature estimation must rely on quartz (or chalcedony), clay minerals and, especially, calcite and dolomite. However, clay minerals and dolomite present important thermodynamic uncertainties related to possible variations in composition or crystallinity degree for clays and order/disorder degree for dolomite. To deal with these problems, a sensitivity analysis to the thermodynamic data for clay minerals has been carried out, comparing the results obtained when considering different solubility data. The uncertainties associated with dolomite have been addressed by reviewing the solubility data available for dolomites with different order degrees and performing specific calculations for the order degree of the dolomite in the aquifer. This approach can be used to find the most adequate dolomite thermodynamic data for the system under consideration, including medium-high temperature geothermal systems. Finally, the temperature estimation of the Alhama-Jaraba waters in the deep reservoir has been obtained from simultaneous equilibria of quartz, calcite, partially disordered dolomite and some aluminosilicate phases. The obtained value of 51 ± 14 °C is within the uncertainty range normally affecting this type of estimations and is coherent with independent estimations from geophysical data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Geochemical evolution of thermal waters in carbonate – evaporitic systems: The triggering effect of halite dissolution in the dedolomitisation and albitisation processes

  • Blasco, M.
  • Auqué, L.F.
  • Gimeno, M.J.
The Fitero and Arnedillo geothermal systems are located in the NW part of the Iberian Range (Northern Spain). The geothermal reservoir is hosted in the Lower Jurassic carbonates, in contact with the evaporitic Keuper Facies. Thermal waters are of chloride-sodium type with discharge temperature of about 45 °C and near neutral pH. The Arnedillo waters are more saline with higher Na, Cl and sulphate contents, but lower Ca and Mg than the Fitero waters. All waters have attained mineral equilibrium at depth with calcite, dolomite, anhydrite, quartz, albite, K-feldspar and other aluminosilicates, except for the Fitero waters, which have not reached the equilibrium with the aluminosilicates. The calculated reservoir temperature is 81 ± 11 °C in Fitero and 87 ± 13 °C in Arnedillo. In order to identify the reasons for the differences found between the two systems some inverse and forward geochemical calculations were performed and the main water-rock interaction processes responsible for the chemical evolution of these waters have been evaluated. Halite dissolution has been found to be the triggering factor for the two most important geochemical processes in the system: a) albitisation process, due to the common ion effect (Na); and b) dedolomitisation process, associated with the salinity increase, which enhance the dissolution of anhydrite and, in turn, produces the precipitation of calcite (common ion effect, Ca) and the concomitant dissolution of dolomite. Halite dissolution may be an important driving force in the geochemical evolution of groundwater systems in contact with carbonates and evaporites, where equilibrium with K-feldspar, albite and anhydrite has already been attained. The evolution of the processes at pH, temperature and salinity ranges wider than those in the Fitero-Arnedillo system has been theoretically examined with additional reaction-path simulations, in order to generalise the geochemical behaviour of these processes in other environments.