Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modelling calcium looping at industrial scale for energy storage in concentrating solar power plants

  • Bailera, Manuel
  • Pascual, Sara
  • Lisbona, Pilar
  • Romeo, Luis
Ca-Looping represents one of the most promising technologies for thermochemical energy storage. This process based on the carbonation-calcination cycle of CaO offers a high potential to be coupled with solar power plants for its long-term storage capacity and high temperatures. Previous studies analyzed different configurations of CaL integrated into power cycles aiming to improve efficiency. However, most of these assessments based on lumped models did not account for scale effect in the most critical reactor. In this work, a detailed 1D-model of a large-scale carbonator is included in the comprehensive model of the integrated facility. The results obtained served to assess the available heat, the minimum technical part load of this equipment, the required size of the storage tanks and the overall efficiency of the plant. The main issue in the operation of large-size carbonator is the heat removal, thus a multi-tube internally cooled reactor is proposed. The designed carbonator provides 80 MWth at nominal operation and 40 MWth at minimum part load operation. The sizing of storage tanks depends on the operation management, ranging between 5,700-11,400 m3 for 15 hours. Different efficiencies of the system were defined and presented through operating maps, as a function of the reactor loads.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and operational performance maps of calcium looping thermochemical energy storage for concentrating solar power plants

  • Pascual, Sara
  • Lisbona, Pilar
  • Bailera, Manuel
  • Romeo, Luis
Calcium-looping thermochemical energy storage associated to concentrating solar plants appears as promising technology given its potential to increase the storage period and energy density of the stored material. Up to now, research efforts focused on the global efficiency of the TCES associated to different power cycles under fixed modes of operation: day or night. However, TCES will never operate under a stationary situation but will experience different operation points to adapt to solar availability and energy demand from the power cycle. The aim is to analyse the influence of those variables which define the operation points, under energy storage and release modes, in the design of the heat exchangers network, storage tanks and reactors involved in the TCES system. The equipment in the conceptual plant have been modelled accounting variable storage/discharge fractions in the mass balances. The results show a suitable capture efficiency, quantifies the stored power and define the size and performance of the heat exchangers required to operate the system. The behaviour of each heat exchanger and their relevance in heat integration with a power plant is derived. The novelty relies in the analysis of potential situations arising from different combinations of charge/discharge fractions of storage tanks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Operation maps in calcium looping thermochemical energy storage for concentrating solar power plants

  • Pascual, S.
  • Lisbona, P.
  • Romeo, L.M.
Calcium Looping (CaL) process used as thermochemical energy storage system in concentrating solar plants has been extensively investigated in the last decade and the first large-scale pilot plants are now under construction. Existing research focuses on improving global efficiencies under steady-state and single modes of operation: energy storage or energy retrieval. However, TCES systems will operate under different operation points to adapt the load of its reactors to the solar availability and the energy demand from the power cycle. A thorough analysis of the operation modes provides an extremely large number of potential situations to operate the system. In this study, operation maps which maximize thermal energy availability and energy storage efficiency are defined. Furthermore, a novel approach for the management of partially carbonated solids is examined to reduce the circulation of inert material in the system based on preliminary experimental results which allows for a partial separation of carbonated solids. Two threshold scenarios are analysed: (i) no solids separation as considered in most CaL TCES studies and (ii) ideal total solids separation. The aims of this work are to set methodological criteria to define the optimal operation map and to assess the effect of partially carbonated solids separation on the energy penalties and equipment size. The inclusion of a solid separation stage leads to a maximum increase of energy storage efficiency of 26 % and a size reduction between 53 and 74 % of those heat exchangers affected by solids streams.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Thermal Energy Storage in Concentrating Solar Power Plants: A Review of European and North American R&D Projects

  • Pascual, Sara
  • Lisbona, Pilar
  • Romeo, Luis M.
Thermal energy storage (TES) is the most suitable solution found to improve the concentrating solar power (CSP) plant’s dispatchability. Molten salts used as sensible heat storage (SHS) are the most widespread TES medium. However, novel and promising TES materials can be implemented into CSP plants within different configurations, minimizing the TES costs and increasing the working temperature to improve the thermal performance of the associated power block. The first objective of this review is to provide an overview of the most widespread CSP technologies, TES technologies and TES-CSP configurations within the currently operational facilities. Once this information has been compiled, the second aim is to collect and present the existing European and North American TES-CSP Research and Development (R&D) projects within the last decade (2011–2021). Data related to these projects such as TES-CSP configuration path, TES and CSP technologies applied, storage capacity, power block associated and the levelized cost of electricity (LCOE) of the commercial up-scaling project are presented. In addition, project information such as location, research period, project leader and budget granted are also extracted. A timeline of the R&D projects launched from 2011 is built, showing the technology readiness level (TRL) achieved by the end of the project.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Waste to energy: Trends and perspectives

  • Lisbona, P.
  • Pascual, S.
  • Pérez, V.
Global waste generation is expected to continue to grow due to economic development and population growth. Therefore, sustainable waste management is mandatory if a sustainable world is desired in which the objectives of the circular economy concept are met, where recovery is the last step to be taken when reduce, reuse or recycle have already been carried out. Waste-to-energy processes could constitute a way to recover energy from waste, helping the access to renewable energy to the world population, in addition to a waste management system. The present review describes different wastes that can be employed in waste-to-energy processes, using thermo-chemical, biochemical and chemical processes. The energy produced can be in the form of heat, electricity or biofuels. For each of these processes, the feedstock used, the state-of-the-art in recent years and the expected trends for the coming years are briefly discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimized Ca-looping thermochemical energy storage under dynamic operation for concentrated solar power

  • Pascual, S.
  • Romeo, L.M.
  • Lisbona, P.
The massive deployment of renewable energy sources and carbon capture technologies are required to achieve net zero emissions target by 2050. Calcium Looping (CaL) is a promising Thermochemical Energy Storage (TCES) system which improves the dispatchability of Concentrating Solar Power (CSP) plants. CaL TCES configurations found in literature focus on a steady-state analysis of thermal-to-electric efficiency of the CSP plants. In this work, the operation of the CaL TCES system for a CSP plant is economically optimized taking into account the seasonal and daily variations of solar resource and electricity prices. The defined methodology determines the operating performance of the CaL TCES which maximize the economic incomes of the CSP and the daily profiles of energy production and storage for representative days of the different seasons/periods of the year. Results show that it is possible to obtain good economic results and operate the CSP + storage for a daily maximization of incomes. Obtained results are also useful for the final design of the system and for the definition of the size required for the storage equipment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solar-driven calcium looping in fluidized beds for thermochemical energy storage

  • Tregambi, Claudio
  • Di Lauro, Francesca
  • Pascual, Sara
  • Lisbona, Pilar
  • Romeo, Luis M.
  • Solimene, Roberto
  • Salatino, Piero
  • Montagnaro, Fabio
Integration between Concentrated Solar Power (CSP) and Calcium Looping (CaL) is gaining consideration in the perspective of large shares of renewable energy sources, to smooth the variability of non-dispatchable energy input. The scope of this study is to investigate the CaL process for ThermoChemical Energy Storage (TCES), by performing a dedicated experimental campaign in fluidized bed under realistic process conditions suitable for CaL-CSP integration. Chemical deactivation of the limestone-based sorbent has been assessed by measuring the extent of Ca carbonation along iterated calcination/carbonation cycles, correlated with physico-chemical characterization of the sorbent at selected stages of the conversion. Properties that have been scrutinized were particle size distribution, bulk density, and particle size, density, and porosity of bed solids. The attainable values of energy storage density were evaluated as well. A remarkable finding of the experimental campaign is the pronounced synergistic deactivation of limestone when it is co-processed with silica sand. Chemical interaction of CaO with the silica sand constituents at the process temperatures has been scrutinized as possible responsible for the loss of reactive CaO toward CO2 uptake. Post-process of particle density data, together with N2-intrusion porosimetric analysis, and quantitative and qualitative XRD analyses, suggests that the sand/lime interaction induces a strong reduction of the total and reactive sorbent porosity and, in turn, of reactivity. Density-based classification to separate converted and unconverted limestone particles after the carbonation step has been evaluated with the goal of increasing process efficiency, by avoiding the circulation of streams with unreacted particles through the plant. For this purpose, the minimum fluidization velocity of calcined and carbonated particles has been measured after each reaction step at the relevant process temperature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Partial separation of carbonated material to improve the efficiency of calcium looping for the thermochemical storage of solar energy

  • Pascual, Sara
  • Tregambi, Claudio
  • Di Lauro, Francesca
  • Solimene, Roberto
  • Salatino, Piero
  • Montagnaro, Fabio
  • Romeo, Luis M.
  • Lisbona, Pilar
Concentrating solar power (CSP) technology with thermal energy storage (TES) could contribute to achieving a net zero emissions scenario by 2050. Calcium looping (CaL) is one of the potential TES processes for the future generation of CSP plants coupled with highly efficient power cycles. Research on CaL as a system for thermochemical energy storage (TCES) has focused on efficiency enhancement based on hybridization with other renewable technologies. This work proposes a novel solid management system to improve the efficiency of a CaL TCES system. The inclusion of a solid–solid separation unit after the carbonation step could lead to energy and size savings. The role of segregation between carbonated and calcined material on plant requirements is assessed, given the experimental evidence on the potential classification between more and less carbonated particles. The results show lower energy (up to 12%) and size (up to 76%) demands when the circulation of less carbonated material through the CaL TCES system diminishes. Moreover, under a classification effectiveness of 100%, the retrieval energy could increase by 32%, and the stored energy is enhanced by five times. The present work can be a proper tool to set the design and size of a CaL TCES system with a partial separation of the carbonated material.