Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermal unmanned aerial vehicles for the identification of microclimatic refugia in topographically complex areas

  • Hoffrén, Raúl
  • García, María B.
Biodiversity loss is one of the most relevant consequences of climate change. Therefore, identifying areas and environmental features that allow certain organisms to be less exposed to the effects of the current global warming is priority for biodiversity conservation. In this study, we describe a novel approach for the identification of microclimatic refugia in rugged mountain areas, specifically for the detection of most thermally stable areas, using an unmanned aerial vehicle (UAV) capable of recording in the visible and thermal infrared spectral bands. We estimated land surface temperatures (LST) at very-high spatial resolution in six topographically complex sectors of the Pyrenees (NE Spain), across seasons with vegetative activity (summer 2020, autumn 2020, spring 2021, and summer 2021), and at two thermally contrasted times of the day (early in the morning: LSTmin, and in the afternoon: LSTmax). LST were validated with a network of miniaturized temperature sensors in the field. LSTmin and LSTmax allowed us to calculate the daily thermal range of each sector across the seasons, and thus the most thermally stable areas over the year. To reveal the importance of different variables on low and narrow thermal ranges we applied Gradient Boosted Models to seven terrain variables derived from ALS-LiDAR (slope, northness, eastness, heat load, wind exposure index, SAGA's topographic wetness index, and vector ruggedness measure) and a proxy of forest density through the three-dimensional point clouds of the UAV data. The northness was the variable that most promoted thermal stability, followed by the slope and forest density, so that microclimatic refugia resulted to be located in northern slopes, small sites under rocky cliffs, and forested areas. Our results demonstrate that thermal UAVs can become promising tools for the identification of microclimatic refugia in topographically complex areas, providing information at unprecedented spatial resolution, and thus of high interest for biodiversity conservation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Assessing GEDI-NASA system for forest fuels classification using machine learning techniques

  • Hoffrén, Raúl
  • Lamelas, María Teresa
  • de la Riva, Juan
  • Domingo, Darío
  • Montealegre, Antonio Luis
  • García-Martín, Alberto
  • Revilla, Sergio
Identification of forest fuels is a key step for forest fire prevention since they provide valuable information of fire behavior. This study assesses NASA’s Global Ecosystem Dynamics Investigation (GEDI) system to classify fuel types in Mediterranean environments according to the Prometheus model in a forested area of NE Spain. We used 59,554 GEDI footprints and extracted variables related to height metrics, canopy profile metrics, and aboveground biomass density estimates from products L2A, L2B, and L4A, respectively. Four quality filters were applied to discard high uncertainty data, reducing the initial footprints to 9,703. Spectral indices from Landsat-8 OLI scenes were created to test the effect of their integration with GEDI variables on fuel types estimation. Ground-truth data were comprised of Prometheus fuel types estimated in two previous studies. Only the types that matched in each GEDI footprint in both studies were used, resulting in a final sample of 1,112 footprints. Spearman’s correlation coefficient, Kruskal-Wallis and Dunn’s tests determined the variables to be included in the classification models: the relative height at the 85th percentile, the Plant Area Index, and the Aboveground Biomass Density from GEDI, and the brightness from Landsat-8 OLI. Best performances were achieved with Random Forest (RF) and Support Vector Machine with radial kernel (SVM-R), which were lower including only GEDI variables (accuracies: RF and SVM-R = 61.54 %) than integrating the brightness from Landsat-8 OLI (accuracies: RF = 83.71 %, SVM-R = 81.90 %). These results allow validating GEDI for fuel type classification of Prometheus model, constituting a promising information for forest management over large areas.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

UAV-derived photogrammetric point clouds and multispectral indices for fuel estimation in Mediterranean forests

  • Hoffrén, R.
  • Lamelas, M. T.
  • de la Riva, J.
Sensors attached to unmanned aerial vehicles (UAVs) allow estimating a large number of forest attributes related to forest fuels. This study assesses photogrammetric point clouds and multispectral indices obtained from a fixed-wing UAV for the classification of Prometheus fuel types in 82 forest plots in Aragón (NE Spain). Images captured by an RGB camera and a multispectral sensor allowed generating high density photogrammetric point clouds (RGB: 3000 points/m2; multispectral: 85 points/m2), which were normalized using alternatively a Digital Elevation Model (DEM) of 0.5, 1, and 2 m resolution. A set of structural and textural variables were derived from the normalized point cloud heights, and for the latter, the gray-level co-occurrence matrix (GLCM) approach was used. Multispectral images were also used to create seven spectral vegetation indices. The most relevant structural, textural, and spectral variables to introduce into the fuel types classification models were selected using Dunn's test, which included: the vegetation height at the 50th percentile, the coefficient of variation of the heights, the percentage of returns above 4 m, the mean textural dissimilarity, and the mean of the Green Chlorophyll Index. Three different data samples were introduced in the models: i) the relevant structural and textural variables from the RGB camera (RGB data sample); ii) the relevant structural, textural, and spectral variables from the multispectral sensor (MS data sample); and iii) the relevant structural and textural variables from the RGB camera plus the relevant spectral variable from the multispectral sensor (integrated data sample). After comparing three machine learning classification techniques (Random Forest, and Linear and Radial Support Vector Machine), the best results were obtained with Random Forest with k-fold cross-validation (k-10) and the integrated data sample with normalized point clouds at 0.5 m DEM resolution (overall accuracy = 71%). The variables successfully identified the Prometheus main fire carriers (i.e., shrubs or trees) and confusions were mainly located within the fuel types of the same dominant stratum, especially in fuel types 3 and 6. These results demonstrate the ability of UAV imagery to classify forest fuels in Mediterranean environments when RGB and multispectral data are combined.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of handheld mobile laser scanner systems for the definition of fuel types in structurally complex Mediterranean forest stands

  • Hoffrén, Raúl
  • Lamelas, María Teresa
  • Riva, Juan de la
The exposure of Mediterranean forests to large wildfires requires mechanisms to prevent and mitigate their negative effects on the territory and ecosystems. Fuel models synthesize the complexity and heterogeneity of forest fuels and allow for the understanding and modeling of fire behavior. However, it is sometimes challenging to define the fuel type in a structurally heterogeneous forest stand due to the mixture of characteristics from the different types and limitations of qualitative field observations and passive and active airborne remote sensing. This can impact the performance of classification models that rely on the in situ identification of fuel types as the ground truth, which can lead to a mistaken prediction of fuel types over larger areas in fire prediction models. In this study, a handheld mobile laser scanner (HMLS) system was used to assess its capability to define Prometheus fuel types in 43 forest plots in Aragón (NE Spain). The HMLS system captured the vertical and horizontal distribution of fuel at an extremely high resolution to derive high-density three-dimensional point clouds (average: 63,148 points/m2), which were discretized into voxels of 0.05 m3. The total number of voxels in each 5 cm height stratum was calculated to quantify the fuel volume in each stratum, providing the vertical distribution of fuels (m3/m2) for each plot at a centimetric scale. Additionally, the fuel volume was computed for each Prometheus height stratum (0.60, 2, and 4 m) in each plot. The Prometheus fuel types were satisfactorily identified in each plot and were compared with the fuel types estimated in the field. This led to the modification of the ground truth in 10 out of the 43 plots, resulting in errors being found in the field estimation between types FT2–FT3, FT5–FT6, and FT6–FT7. These results demonstrate the ability of the HMLS systems to capture fuel heterogeneity at centimetric scales for the definition of fuel types in the field in Mediterranean forests, making them powerful tools for fuel mapping, fire modeling, and ultimately for improving wildfire prevention and forest management.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Methodological Approach for Assessing the Resilience of Pinus halepensis Mill. Plant Communities Using UAV-LiDAR Data

  • Pérez-Cabello, Fernando
  • Iranzo, Cristian
  • Hoffrén, Raúl
  • Adell, María
  • Montealegre, Antonio
  • Montorio, Raquel
  • García-Martín, Alberto
  • Longares, Luis A.
The assessment of fire effects in Aleppo pine forests is crucial for guiding the recovery of burned areas. This study presents a methodology using UAV-LiDAR data to quantify malleability in three burned areas (1970, 1995, 2008) through the statistical analysis of tree height and Profile Area Change (PAC) metrics. Significant differences in vegetation height (99th percentile) among the three fires, with specific maximum absolute differences (D) depending on the fire year, have been identified. Positive PAC values in 2008 indicate deeper LiDAR penetration, resulting in lower regeneration, while values close to 0 in 1970 suggest more uniform regeneration. The use of LiDAR metrics and uni-temporal sampling between burned sectors and controls aids in understanding community resilience and identifying recovery stages in P. halepensis forests.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Classification and mapping of fuels in Mediterranean forest landscapes using a UAV-LiDAR system and integration possibilities with Handheld Mobile Laser Scanner systems

  • Hoffrén, Raúl
  • Lamelas, María Teresa
  • Riva, Juan de la
In this study, we evaluated the capability of an unmanned aerial vehicle with a LiDAR sensor (UAV-LiDAR) to classify and map fuel types based on the Prometheus classification in Mediterranean environments. UAV data were collected across 73 forest plots located in NE of Spain. Furthermore, data collected from a handheld mobile laser scanner system (HMLS) in 43 out of the 73 plots were used to assess the extent of improvement in fuel identification resulting from the fusion of UAV and HMLS data. UAV three-dimensional point clouds (average density: 452 points/m2) allowed the generation of LiDAR metrics and indices related to vegetation structure. Additionally, voxels of 5 cm3 derived from HMLS three-dimensional point clouds (average density: 63,148 points/m2) facilitated the calculation of fuel volume at each Prometheus fuel type height stratum (0.60, 2, and 4 m). Two different models based on three machine learning techniques (Random Forest, Linear Support Vector Machine, and Radial Support Vector Machine) were employed to classify the fuel types: one including only UAV variables and the other incorporating HMLS volume data. The most relevant UAV variables introduced into the classification models, according to Dunn’s test, were the 99th and 10th percentile of the vegetation heights, the standard deviation of the heights, the total returns above 4 m, and the LiDAR Height Diversity Index (LHDI). The best classification using only UAV data was achieved with Random Forest (overall accuracy = 81.28%), with confusion mainly found between similar shrub and tree fuel types. The integration of fuel volume from HMLS data yielded a substantial improvement, especially in Random Forest (overall accuracy = 95.05%). The mapping of the UAV model correctly estimated the fuel types in the total area of 55 plots and at least part of the area of 59 plots. These results confirm that UAV-LiDAR systems are valid and operational tools for forest fuel classification and mapping and show how fusion with HMLS data refines the identification of fuel types, contributing to more effective management of forest ecosystems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Methodological Approach for Assessing the Post-Fire Resilience of Pinus halepensis Mill. Plant Communities Using UAV-LiDAR Data Across a Chronosequence

  • Larraz-Juan, Sergio
  • Pérez-Cabello, Fernando
  • Hoffrén Mansoa, Raúl
  • Iranzo Cubel, Cristian
  • Montorio, Raquel
The assessment of fire effects in Aleppo pine forests is crucial for guiding the recovery of burnt areas. This study presents a methodology using UAV-LiDAR data to quantify malleability and elasticity in four burnt areas (1970, 1995, 2008 and 2015) through the statistical analysis of different metrics related to height structure and diversity (Height mean, 99th percentile and Coefficient of Variation), coverage, relative shape and distribution strata (Canopy Cover, Canopy Relief Ratio and Strata Percent Coverage), and canopy complexity (Profile Area and Profile Area Change). In general terms, malleability decreases over time in forest ecosystems that have been affected by wildfires, whereas elasticity is higher than what has been determined in previous studies. However, a particular specificity has been detected from the 1995 fire, so we can assume that there are other situational factors that may be affecting ecosystem resilience. LiDAR metrics and uni-temporal sampling between burnt sectors and control aids are used to understand community resilience and to identify the different recovery stages in P. halepensis forests.