Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Half-Mode Groove Gap Waveguide for Single-Layer Antennas in the Millimeter-Wave Band

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] This letter presents an alternative to significantly reduce the time and difficulty in designing and fabricating antennas in gap waveguide (GW) technology by using a novel half-mode groove GW. GW is often criticized within the subtractive manufacturing field for the high fabrication time required to mill many pins with the waveguides in the same piece. To demonstrate the possibilities of this new approach, two different antennas have been designed, fabricated, and measured. Both antennas, formed by only two pieces with no contact, operate from 29 to 31 GHz and present reflection coefficients below -10 dB and high antenna efficiency above 90%. In addition, both prototypes can reuse the bed of nails, which favors shorter manufacturing times and lower costs in the development phase., This work was supported in part by the Agencia Estatal de Investigacion (AEI) of Spain under Grant PID2019-107688RB-C22 and in part by the University of Alicante of Spain under Grant GRE20-06-A
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ka-band diplexer design based on half-mode groove gap waveguide

  • Marini, Stephan
  • Morales-Hernández, Aitor
  • Gimeno-Nieves, Encarnación
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper shows the practical design of a Ka-band tuning-less diplexer in half-mode groove gap waveguide (HM-GGW) technology for multi-beam satellite applications. This new technology can be easily manufactured, since it lets the design of two separate metallic pieces: one for the cover with periodic pins, and another one for the half-groove gap waveguide structure. The proposed diplexer is composed of two bandpass HM-GGW filters, an H-plane T-junction and the corresponding transitions to the input/output WR28 rectangular ports. To illustrate how this technology can be applied, a prototype has been successfully fabricated, showing in-band measured return and insertion losses of 21 dB and 0.87 dB in the lower band, 16 dB and 0.86 dB in the upper band, and a good isolation level (better than 32.5 dB) in the whole operational frequency range., This work was supported by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , through the Sub-Projects C43 and C41 of the Coordinated Projects PID2022-136590OB, and by the University of Alicante, Spain under the project GRE20-06A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-Layer Sequential Rotation Network in Gap Waveguide for a Wideband Low-Profile Circularly Polarized Array Antenna

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
[EN] A low-profile circularly-polarized sequential rotation fed 4 x 4 array antenna working in the Ka-band from 27.5 GHz to 31 GHz is presented. The particularity of the antenna lies in its single-layer sequential rotation feed network implemented in a bed of nails using a combination of groove and ridge gap waveguides. The basic radiating element is one slot loaded by a simple coffee-bean-shaped parasitic element on top. Experimental results show an antenna matching below -10 dB in a 13.6% bandwidth and a measured axial ratio below 1.3 dB in the desired band., This work was supported in part by the Ministry of Science and Innovation of the Spanish Government, in part by the Agencia Estatal de Investigacion (AEI) under Project PID2019-107688RB-C22 and Project AEI/10.13039/501100011033, and in part by the University of Alicante under the Research Project GRE20-06-A.