Pasar al contenido principal

MODELADO FOTORREALISTICO TRIDIMENSIONAL AUTOMATIZADO APLICADO A LA DOCUMENTACION PATRIMONIAL

HAR2010-18620

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Statistical grey level and noise evaluation of Foveon X3 and CFA image sensors

  • Marqués-Mateu, Ángel|||0000-0003-1343-103X
  • Lerma, José Luis|||0000-0001-9443-9214
  • Riutort Mayol, Gabriel
This paper presents a practical, comprehensive and flexible statistical framework to analyze the radiometric response values and their uncertainty effects on image-based sensor systems. The statistical framework is based on experimental techniques and is tested on two single lens reflex (SLR) cameras powered by different image sensors, Foveon X3 and Color Filter Array (CFA). A colorchecker inside an indoor light booth is used as target. Design of Experiments (DoE) for Linear Models (LM) are derived to analyze and characterize the variability of the output grey level signal (digital number) and their uncertainty effects according to influential factors such as scene reflectance, wavelength range and time. The digital numbers are statistically modeled, and their noise and temporal trend are the uncertainty effects analyzed. Experiments are carried out under laboratory conditions to minimize the rest of uncertainty sources that might affect digital numbers. The flexibility of the statistical framework is confirmed to model and characterize the digital numbers, as well as the noise of a single image and the stability (trend and noise) of a temporal sequence of images., The authors would like to thank the support provided by the Spanish Ministry of Science and Innovation to the project HAR2010-18620. The authors also acknowledge the chance to take pictures with the lighting equipment in the Soils Laboratory at the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multispectral Sensors in Combination with Recording Tools for Cultural Heritage Documentation

  • Lerma, José Luis|||0000-0001-9443-9214
  • Akasheh, Talal
  • Haddad, Naif
  • Cabrelles López, Miriam
[EN] Documentation of cultural monuments and sites often includes a thorough analysis of their condition through time. This paper addresses the benefits of using multispectral imagery such as visible, near-infrared, and thermal infrared imagery in combination with terrestrial laser scanning to assess the state of preservation of a sandstone tomb, the Djin Block No. 9 in Petra Archaeological Park in Jordan. The combination of the different multispectral bands (visible, reflected near-infrared, and thermal infrared) and enhanced combinations of them yielded comprehensive data to analyze with maximum reliability the state of preservation of the monument with state-ofthe- art photographic and 3D surveying techniques, The authors would like to express their thanks for the support provided by the Agencia Espan˜ola de Cooperacio´n Internacional para el Desarrollo (AECID) to the project A/025999/ 09 and the Spanish Ministry of Science and Innovation to the project HAR2010–18620. Additional support to the Jordanian team from Societa` Italiana per Condotte d’Acqua S.p.A. is very much appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Los sistemas de información geográfica: concepto, ventajas y posibilidades en el campo de la restauración

  • Seguí, Ana Elena
  • Portalés, Cristina
  • Cabrelles, Miriam
  • Lerma, José Luis
[EN] Architectonic restoration and conservation works require documentation and management tasks that can be stored in an orderly manner in an information system that permits efficient and independent management both of the nature of the data and its formats (images, plans, texts, etc.). This article reviews the technology of Geographic Information Systems (GIS) as an optimal management tool as it can successfully integrate graphic and alphanumeric data. These tools have mainly been used in the ­fields of geography, geology, archaeology and topography. Nevertheless, the inexorable development and diffusion and management capacity that these systems possess have opened the doors to new areas, especially in the realm of architecture., [ES] Los trabajos de restauración y conservación arquitectónica requieren labores de documentación y gestión que se pueden almacenar de forma ordenada en un sistema informático que permite una gestión eficiente e independiente tanto de la naturaleza de los datos como de sus formatos (imágenes, planos, textos, etc.). Este artículo revisa la tecnología de los Sistemas de Información Geográfica (SIG) como instrumento óptimo de gestión al poder integrar eficazmente datos gráficos y alfanuméricos. Estas herramientas se han utilizado principalmente en los campos de la geografía, la geología, la arqueología y la topografía. Sin embargo, el desarrollo imparable y la capacidad de difusión y de gestión que brindan estos sistemas, han abierto las puertas a nuevas áreas de entre las que destaca el ámbito de la arquitectura., Los autores agradecen el apoyo y la -nanciación del Ministerio de Ciencia y Tecnología al Proyecto HAR2010-18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the 3D documentation of an early Christian upright stone with carvings from Scotland with multiples images

  • Lerma, José Luis|||0000-0001-9443-9214
The documentation of cultural heritage assets requires precise and consistent approaches to preserve, analyse and monitor their integrity to future generations. The present paper deals with the 3D documentation of a unique early Christian carved stone discovered from Scotland that had been restored in the early 20th BC after accidental fragmentation. Different recording approaches are investigated; one range-based, acquired with a triangulation laser scanner and two image-based 3D reconstruction approaches, following computer vision and photogrammetric workflow with differing numbers of images. An off-the-shelf zoom digital camera was used to acquire the data, followed by structure from motion and dense multi-view image matching to create dense 3D point clouds. The differences in the derived 3D models are presented and meaningful recommendations can be extrapolated for likewise surveys., The authors acknowledge the Generalitat Valenciana grant BEST/2013/103 for the postdoctoral stay in Scotland, as well as the support provided by the Spanish Ministry of Science and Innovation to the project HAR2010-18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelado fotorrealístico 3D a partir de procesos fotogramétricos: láser escáner versus imagen digital, Photorealistic 3D modelling by photogrammetry: laser scanning versus digital image

  • Lerma, José Luis|||0000-0001-9443-9214
  • Cabrelles López, Miriam
  • Navarro Tarin, Santiago
  • Seguí Gil, Ana Elena
[ES] La documentación del patrimonio en dos y tres dimensiones es una labor que, desde hace tiempo, ha venido realizándose satisfactoriamente mediante soluciones fotogramétricas. A día de hoy, las nuevas tecnologías abren la puerta a estudios y análisis métricos más completos y exhaustivos en 3D. En el presente artículo se analizan las técnicas fotogramétricas más precisas y rigurosas que actualmente se utilizan en labores de documentación del patrimonio, capaces de producir réplicas exactas de abrigos arqueológicos a partir de imágenes e instrumentación láser. Este artículo presenta la experimentación realizada en el abrigo X del Cingle de la Mola Remígia, Ares del Maestre (Castellón), ejemplo de arte rupestre del arco mediterráneo en la Península Ibérica. Los resultados permiten confirmar que los modelos 3D obtenidos a partir de láser escáner terrestre y mediante múltiples imágenes son comparables en calidad y precisión, si bien la integración óptima de ambos permite alcanzar modelos fotorrealísticos 3D de máxima calidad, [EN] The documentation of cultural heritage in two and three dimensions is an intensive task that has long been carried out successfully by means of photogrammetric solutions. At present, the new technologies allow users more comprehensive and exhaustive metric studies and analysis fully in 3D. This paper reviews the most precise and rigorous photogrammetric techniques used nowadays to document cultural heritage. These techniques can be used to build up accurate replicas of archaeological shelters by imagery and range-based devices. The rock art Cingle de la Mola Remigia shelter number X placed in Ares del Maestre (Castellón) is selected herein as a case study. The results allow us to confirm that the 3D models obtained either from terrestrial laser scanning or from multiple images are comparable in quality and precision. However, the optimum integration of both sources of information let us achieve maximum quality photorealistic 3D models., Los resultados presentados en este artículo se enmarcan dentro del proyecto de investigación de excelencia Prometeo/2008/165 de la Generalitat Valenciana y en el proyecto de investigación HAR2010-18620 del Ministerio de Ciencia y Tecnología.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibración geométrica de escáner láser terrestre mediante software específico

  • García San Miguel, David
  • Lerma, José Luis|||0000-0001-9443-9214
  • Navarro Tarin, Santiago
[ES] El empleo de tecnologías de escaneado láser para el registro masivo de información se ha visto tremendamente impulsado en estos últimos tiempos. Del mismo modo que cualquier otro instrumento topográfico o geodésico, estarán sujetos a sistematismos varios e imperfecciones. Estos sistematismos quedarán modelizados por un conjunto de parámetros adicionales de orientación interna, cuya obtención será posible gracias a la implementación de un software de cálculo específico. Se mostrarán los pasos a seguir para la consecución de la calibración geométrica de un escáner láser Leica HDS3000 de tiempo de vuelo, y se cuantificarán las mejoras logradas a posteriori., [EN] The use of laser scanner technology to capture massive information has been tremendous/y boosted in recent times. In the same way as any other surveying or geodetic instrument, they are subjected to systematic errors and imperfections. These systematic errors will be modeled by a set of additional parameters of interna/ orientation through the implementation of specialized software. The different steps carried out to determine the terrestrial laser scanning Leica HDS3000 geometric calibration in flighttime will be presented. The a posteriori improvements will a/so be quantified., Los resultados presentados se enmarcan dent ro del proyecto de investigación HAR2010-18620 del Ministerio de Ciencia y Tecnología.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Virtual worlds for photogrammetric image-based simulation and learning

  • Piatti, Eduardo Jorge
  • Lerma, José Luis|||0000-0001-9443-9214
Simulation is a common activity in many fields and pursuits, not only for teaching but also for learning, training, monitoring, research and entertainment, among others. This paper presents the criteria used to develop virtual scenarios for photogrammetric simulation based on both synthetic objects and synthetic images. The workflow used to generate three-dimensional (3D) virtual worlds is presented together with the subsequent reconstruction of the metric perspective images (synthetic scenes) emulating any type of frame camera in any kind of terrestrial or aerial set-up, the latter with an aeroplane, helicopter or unmanned aerial vehicle (UAV). A simulator can be used to create 3D virtual worlds in order to improve an understanding of mission planning, generate synthetic image sequences with suitable overlaps, as well as optimising image data acquisition before undertaking expensive photogrammetric surveys in the field., The authors would like to thank the support provided by the Spanish Ministry of Science and Innovation to project HAR2010-18620 and the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Range-based versus automated markerless image-based techniques for rock art documentation

  • Lerma, José Luis|||0000-0001-9443-9214
  • Cabrelles López, Miriam
  • Navarro Tarin, Santiago
  • Seguí Gil, Ana Elena
Nowadays there is a huge proliferation of fully automatic image-based solutions producing either three-dimensional (3D) point clouds or 3D models. However, the reliability of the output is not usually reported and clarified. This paper presents a comparison of the 3D modelling results achieved on two rock art shelters at separate archaeological sites using a high-resolution digital camera. The 3D point clouds were produced using automatic image-based photogrammetric and computer vision software running either locally (FOTOGIFLE and VisualSFM) or through a webbased reconstruction service (Autodesk 123D Catch). The first two automatic approaches are compared with a manual bundle block adjustment. Dense image matching was undertaken to densify the point clouds prior to 3D modelling. The derived 3D models are compared with a time-of-flight laser scanning dataset that was used as ground truth. Statistical analysis shows significant metric differences on the digital surface models for the different solutions., The authors would like to thank the support provided by the Generalitat Valenciana to the excellence project PROMETEO/2008/165 and the Spanish Ministry of Science and Innovation to the project HAR2010-18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic orientation and 3D modelling from markerless rock art imagery

  • Lerma, José Luis|||0000-0001-9443-9214
  • Cabrelles López, Miriam
  • Navarro Tarin, Santiago
  • Seguí Gil, Ana Elena
  • Hernández López, David
This paper investigates the use of two detectors and descriptors on image pyramids for automatic image orientation and generation of 3D models. The detectors and descriptors replace manual measurements and are used to detect, extract and match features across multiple imagery. The Scale-Invariant Feature Transform (SIFT) and the Speeded Up Robust Features (SURF) will be assessed based on speed, number of features, matched features, and precision in image and object space depending on the adopted hierarchical matching scheme. The influence of applying in addition Area Based Matching (ABM) with normalised cross-correlation (NCC) and least squares matching (LSM) is also investigated. The pipeline makes use of photogrammetric and computer vision algorithms aiming minimum interaction and maximum accuracy from a calibrated camera. Both the exterior orientation parameters and the 3D coordinates in object space are sequentially estimated combining relative orientation, single space resection and bundle adjustment. The fully automatic image-based pipeline presented herein to automate the image orientation step of a sequence of terrestrial markerless imagery is compared with manual bundle block adjustment and terrestrial laser scanning (TLS) which serves as ground truth. The benefits of applying ABM after FBM will be assessed both in image and object space for the 3D modelling of a complex rock art shelter. © 2012 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS)., The authors gratefully acknowledge the support from the Spanish Ministry of Science and Innovation project HAR2010-18620 and the Generalitat Valenciana project PROMETEO/2008/165.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photo-realistic 3D modelling of sculptures on open-air museums

  • Duca, Francesca
  • Navarro Tarin, Santiago
  • Seguí Gil, Ana Elena
  • Cabrelles López, Miriam
  • Lerma, José Luis|||0000-0001-9443-9214
[EN] Laser scanning is a high-end technology with possibilities far ahead the well-known civil engineering and industrial applications. The actual geomatic technologies and methodologies for cultural heritage documentation allow the generation of very realistic 3D results used for many scopes like archaeological documentation, digital conservation, 3D repositories, etc. The fast acquisition times of large number of point clouds in 3D opens up the world of capabilities to document and keep alive cultural heritage, moving forward the generation of virtual animated replicas of great value and smooth multimedia dissemination. This paper presents the use of a terrestrial laser sca nning (TLS) as a valuable tool for 3D documentation of large outdoor cultural heritage sculptures such as two of the existing ones inside the “Campus de Vera” of the UPV: “Defensas I” and “Mentoring”. The processing of the TLS data is discussed in detail in order to create photo-realistic digital models. Data acquisition is conducted with a time-of-flight scanner, characterized by its high accuracy, small beam, and ultra-fine scanning. Data processing is performed using Leica Geosystems Cyclone Software for the data registration and 3DReshaper Software for modelling and texturing. High-resolution images after calibration and orientation of an off-the-shelf digital camera are draped onto the models to achieve right appearance in colour and texture. A discussion on the differences found out when modelling sculptures with different deviation errors will be presented. Processing steps such as normal smoothing and vertices recalculation are found appropriate to achieve continuous meshes around the objects., The authors gratefully acknowledge the support from the Spanish Ministry of Science and Innovation project HAR2010-18620
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generation of true ortho-images based on virtual worlds: learning aspects

  • Piatti, Eduardo Jorge
  • Lerma, José Luis|||0000-0001-9443-9214
Many of the theoretical concepts in photogrammetry are difficult to understand by means of equations and figures. Furthermore, commercial software is not usually adapted to the requirements of teaching and learning. However, photogrammetric simulation software based on virtual worlds can be used to improve both learning and understanding of complex geometrical issues such as the generation of true ortho-images in urban areas, and assists in training and skills development. This paper tackles image orthorectification by means of a photogrammetric simulation and its generation based on digital elevation/ building/surface models, and the interior and exterior orientation parameters of the image sensor, namely, a digital camera. Internal processes such as masking and visibility analysis which are necessary to yield successful true ortho-images are reported, with examples from both simple and complex urban environments., The authors gratefully acknowledge the support from the Spanish Ministry of Science and Innovation project HAR2010-18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grey Level and Noise Evaluation of a Foveon X3 Image Sensor: A Statistical and Experimental Approach

  • Riutort Mayol, Gabriel
  • Seguí Gil, Ana Elena
  • Marqués-Mateu, Ángel|||0000-0003-1343-103X
  • Lerma, José Luis|||0000-0001-9443-9214
Radiometric values on digital imagery are affected by several sources of uncertainty. A practical, comprehensive and flexible procedure to analyze the radiometric values and the uncertainty effects due to the camera sensor system is described in this paper. The procedure is performed on the grey level output signal using image raw units with digital numbers ranging from 0 to 212-1. The procedure is entirely based on statistical and experimental techniques. Design of Experiments (DoE) for Linear Models (LM) are derived to analyze the radiometric values and estimate the uncertainty. The presented linear model integrates all the individual sensor noise sources in one global component and characterizes the radiometric values and the uncertainty effects according to the influential factors such as the scene reflectance, wavelength range and time. The experiments are carried out under laboratory conditions to minimize the rest of uncertainty sources that might affect the radiometric values. It is confirmed the flexibility of the procedure to model and characterize the radiometric values, as well as to determine the behaviour of two phenomena when dealing with image sensors: the noise of a single image and the stability (trend and noise) of a sequence of images., The authors would like to thank the support provided by the Spanish Ministry of Science and Innovation to the project HAR2010-18620. The authors also acknowledge the chance to take pictures with the lighting equipment in the Soils Laboratory at the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A robust and hierarchical approach for the automatic co-registration of intensity and visible images

  • González Aguilera, Diego
  • Rodríguez Gonzálvez, Pablo
  • Hernández López, David
  • Lerma, José Luis|||0000-0001-9443-9214
This paper presents a new robust approach to integrate intensity and visible images which have been acquired with a terrestrial laser scanner and a calibrated digital camera, respectively. In particular, an automatic and hierarchical method for the co-registration of both sensors is developed. The approach integrates several existing solutions to improve the performance of the co-registration between range-based and visible images: the Affine Scale-Invariant Feature Transform (A-SIFT), the epipolar geometry, the collinearity equations, the Groebner basis solution and the RANdom SAmple Consensus (RANSAC), integrating a voting scheme. The approach presented herein improves the existing co-registration approaches in automation, robustness, reliability and accuracy. © 2012 Elsevier Ltd. All rights reserved., The authors wish to thank the Ministerio de Ciencia e Innovacion (Gobierno de Espana) and the Junta de Castilla y Leon for the financial support through the National Research Projects BIA2010-15145 and HAR2010-18620 and the Autonomic Project SA063A11-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibration and Direct Georeferencing Analysis of a Multi-Sensor System for Cultural Heritage Recording

  • Hernández López, David
  • Felipe García, Beatriz
  • Cabrelles López, Miriam
  • Lerma, José Luis|||0000-0001-9443-9214
A large amount of cultural heritage monuments and sites exist distributed worldwide that require easy to use, cheap and fast sensor orientation tools for recording, georeferencing, surveying and mapping. Ground control points are usually required on site for close range photogrammetry to achieve accurate surveys, limiting both the involvement of non-experts and the chance to know the right place of the monuments unless a ground reference system is considered. This paper presents the system calibration of an image-based multi-sensor system that integrates two consumer-grade cameras, one global navigation satellite system (GNSS) and one low-cost inertial system, i.e., a micro-electro-mechanical system (MEMS) based inertial measurement unit (IMU). The multi-sensor system is calibrated indoor regarding both the camera orientation parameters and the boresight (rotations and offsets) parameters of the two digital cameras. The boresight parameters will be used to correct the direct approach estimates. The performance of the system calibration is tested outdoor on an upside down pyramidal sculpture to deliver both accurate 3D points and high resolution 3D models. Both scenarios are considered free of magnetic anomalies. The results achieved with the GNSS/MEMS-IMU direct approach are compared with the indirect approach based on bundle block adjustment. Further extrapolations to object space through digital surface models are also determined. The testing of the system shows that GNSS/MEMS-IMU data are good enough to provide approximate exterior orientation parameters of the cameras but not to yield accurate 3D models (<1 - 2 cm) for cultural heritage applications., The authors would like to thank for the support provided by the Spanish Ministry of Science and Innovation to the project HAR2010-18620. Special thanks need to be expressed to Dr. LUIS GARCIA-ASENJO and Mr. PASCUAL GARRIGUES from the Polytechnic University of Valencia for their contributions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Geometric calibration of a terrestrial laser scanner with local additional parameters: An automatic strategy

  • García San Miguel, David
  • Lerma, José Luis|||0000-0001-9443-9214
Terrestrial laser scanning systems are steadily increasing in many &#64257;elds of engineering, geoscience and architecture namely for fast data acquisition, 3-D modeling and mapping. Similarly to other precision instruments, these systems provide measurements with implicit systematic errors. Systematic errors are physically corrected by manufacturers before delivery and sporadically afterwards. The approach presented herein tackles the raw observables acquired by a laser scanner with additional parameters, a set of geometric calibration parameters that model the systematic error of the instrument to achieve the most accurate point cloud outputs, improving eventual work&#64258;ow owing to less &#64257;ltering, better registration and best 3D modeling. This paper presents a fully automatic strategy to calibrate geometrically terrestrial laser scanning datasets. The strategy is tested with multiple scans taken by a FARO FOCUS 3D, a phase-based terrestrial laser scanner. A calibration with local parameters for datasets is undertaken to improve the raw observables and a weighted mathematical index is proposed to select the most significant set of additional parameters. The improvements achieved are exposed, highlighting the necessity of correcting the terrestrial laser scanner before handling multiple data sets., The authors would like to thank the support provided by the Spanish Ministry of Science and Innovation to project HAR2010-18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Documentation of weathered architectural heritage with visible, near infrared, thermal and laser scanning data

  • Lerma, José Luis|||0000-0001-9443-9214
  • Cabrelles López, Miriam
  • Akasheh, T. S.
  • Haddad, N.A.
[EN] Documentation of cultural heritage requires simple, quick and easy to use multi-sensor approaches to determine the state of conservation of monuments and sites. The documentation of a highly weathered architectural heritage such as the Obelisk Tomb is a good example to test the performance integrating multispectral imagery and laser scanning data. The Obelisk Tomb is the first important façade that a visitor sees while entering to the archaeological site of Petra in Jordan. The rich architectural formations carry Egyptian, Hellenistic and Nabataean influences. The damage that was inflicted on this unique monument led us to study it applying a number of modern digital techniques including 3D scanning, multispectral photography with visible and near infrared images, and thermography. All the multiband content is initially registered onto different multispectral bands. The multispectral information is enhanced and eventually draped onto the 3D laser scanning model in order to improve documentation and analysis of the state of conservation. Our results integrating the multispectral data, thermography and terrestrial laser scanning clearly enhance the power of diagnosis over the Obelisk Tomb with state-of-the-art optical equipment and image processing software. Furthermore, the capacity to examine, analyse and detect the existing damages is enhanced by the false colour processing of the input photographic data. Weathering effects are highlighted onto the 3D model and shed some light on the causes of the damages., The authors would like to thank the support provided by the Agencia Española de Cooperación Internacional para el Desarrollo (AECID) to the project A/025999/09 and the Spanish Ministry of Science and Innovation to the project HAR2010–18620.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Documentación 3D de abrigos rupestres a partir de láser escáner y de procesos fotogramétricos automatizados

  • Cabrelles López, Miriam
  • Lerma, José Luis|||0000-0001-9443-9214
[EN] Metric and graphic documentation of archaeological cultural heritage requires effective solutions for archiving, visualization, analysis, management, and monitoring of different monuments and sites. This paper presents the geomatic workflow undertaken on a singular rock art site, Coves de la Saltadora. The cave is part of the Rock Art of the Mediterranean Basin on the Iberian Peninsula declared World Heritage Site by UNESCO in1998. The different steps are reviewed, starting from the data acquisition until the final delivery of part of the metric outputs such as 3D models, photorealistic models, orthophoto mosaics in two levels, general and detail., [ES] La documentación métrico-gráfica del patrimonio cultural arqueológico requiere de soluciones efectivas que permitan archivar, visualizar, gestionar, analizar y monitorizar los distintos yacimientos y sitios existentes. El artículo que se presenta muestra el flujo de trabajo geomático desarrollado en las labores de documentación de un conjunto de arte rupestre de dimensiones singulares, Coves de la Saltadora. Dicha cueva forma parte del Arte rupestre del arco mediterráneo de la Península Ibérica inscrito en la lista de Patrimonio Mundial por la UNESCO en 1998. Se revisan las distintas etapas, desde la fase de captura hasta la entrega de parte de los productos métricos derivados, como son los modelos 3D, los modelos fotorrealísticos y los ortofotomosaicos a nivel general y de detalle., Los resultados presentados se enmarcan dentro de dos proyectos de investigación, PROMETEO/2008/165 de la Generalitat Valenciana y HAR2010-18620 del Ministerio de Ciencia y Tecnología. Los autores agradecen la inestimable ayuda del Prof. Dr. Valentín Villaverde y de Trinidad Martínez de la Universitat de València, y la colaboración de Alfonso Enrique de Leica Geosystems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Digital Photography to Photogrammetry for Cultural Heritage Documentation and Dissemination, Dalla fotografia digitale alla fotogrammetria per i Beni Culturali Documentazione e Divulgazione

  • Lerma, José Luis|||0000-0001-9443-9214
  • Cabrelles López, Miriam
  • Navarro Tarin, Santiago
  • Fabado Salvador, Santiago
[EN] Digital photography is considered a valuable tool for cultural heritage documentation. Surveying and photogrammetry are required to achieve metric and accurate results in drawings, 2D/3D modelling and texturing. This paper presents the photogrammetric workflow from data acquisition to photorealistic 3D modelling and four heritage documentation case studies in different sites. High resolution and high accuracy photorealistic 3D models allow experts to recreate and interact virtually with cultural heritage either before, during of after intervention. Managers and information experts of cultural heritage monuments and sites should consider photogrammetric by-products not only to enrich knowledge, improve understanding and provide scientific records but to ease dissemination of heritage resources., [IT] La fotografia digitale è considerata un valido strumento per la documentazione del patrimonio culturale. Topografia e fotogrammetria sono necessari per ottenere risultati metrici precisi nei disegni, modellazione 2D/3D e texturing. Questo articolo descrive il processo di lavoro adottato dall'acquisizione dati alla modellazione 3D fotorealistica. Inoltre, sono documentati alcuni casi studio relativi a diversi siti. I Manager e gli esperti di comunicazione sul patrimonio culturale, dovrebbero considerare la fotogrammetria uno strumento non solo per arricchire la conoscenza, per migliorare la comprensione e fornire registrazioni scientifiche, ma anche per facilitare la diffusione delle risorse del patrimonio., The authors woild lide to thank the support provided by the Spanish Ministry of Science and Innovation to the project HAR2010-18620