Pasar al contenido principal

CONSERVACION PREVENTIVA DE LOS MOSAICOS ROMANOS DE LA VILLA ROMANA DE NOHEDA (CUENCA), DEL LUGAR ARQUELOGICO DE L¿ALMOINA (VALENCIA) Y OTROS.

HAR2013-47895-C2-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An energy-efficient internet of things (IoT) architecture for preventive conservation of cultural heritage

  • Perles, Angel|||0000-0002-5782-4284
  • Pérez-Marín, Eva|||0000-0003-3201-8451
  • Mercado Romero, Ricardo|||0000-0003-3316-0097
  • Segrelles Quilis, José Damián|||0000-0001-5698-7965
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
  • Zarzo Castelló, Manuel|||0000-0002-8361-0554
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] Internet of Things (IoT) technologies can facilitate the preventive conservation of cultural heritage (CH) by enabling the management of data collected from electronic sensors. This work presents an IoT architecture for this purpose. Firstly, we discuss the requirements from the artwork standpoint, data acquisition, cloud processing and data visualization to the end user. The results presented in this work focuses on the most critical aspect of the architecture, which are the sensor nodes. We designed a solution based on LoRa and Sigfox technologies to produce the minimum impact in the artwork, achieving a lifespan of more than 10 years. The solution will be capable of scaling the processing and storage resources, deployed either in a public or on-premise cloud, embedding complex predictive models. This combination of technologies can cope with different types of cultural heritage environments., This work was partially funded by the Generalitat Valenciana project AICO/2016/058 and by the Plan Nacional de I+D, Comision Interministerial de Ciencia y TecnologiA (FEDER-CICYT) under the project HAR2013-47895-C2-1-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of a Hybrid (Wired/Wireless) Acquisition Data System for Monitoring of Cultural Heritage Physical Parameters in Smart Cities

  • García Diego, Fernando Juan|||0000-0002-7062-245X
  • Esteban, Borja
  • Merello Giménez, Paloma
Preventive conservation represents a working method and combination of techniques which helps in determining and controlling the deterioration process of cultural heritage in order to take the necessary actions before it occurs. It is acknowledged as important, both in terms of preserving and also reducing the cost of future conservation measures. Therefore, long-term monitoring of physical parameters influencing cultural heritage is necessary. In the context of Smart Cities, monitoring of cultural heritage is of interest in order to perform future comparative studies and load information into the cloud that will be useful for the conservation of other heritage sites. In this paper the development of an economical and appropriate acquisition data system combining wired and wireless communication, as well as third party hardware for increased versatility, is presented. The device allows monitoring a complex network of points with high sampling frequency, with wired sensors in a 1-wire bus and a wireless centralized system recording data for monitoring of physical parameters, as well as the future possibility of attaching an alarm system or sending data over the Internet. This has been possible with the development of three board's designs and more than 5000 algorithm lines. System tests have shown an adequate system operation., The authors acknowledge the collaboration of Rosa Maria Rodriguez y Belen Villanueva, superior and management technicians of Blasco Ibanez Museum-House respectively. This work was partially supported by the Spanish Government (Ministerio de Economia y Competitividad) under projects HAR2013-47895-C2-1-P and HAR2013-47895-C2-2-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quantitative non-invasive method for damage evaluation in frescoes: Ariadne&apos, s House (Pompeii, Italy)

  • Merello Giménez, Paloma
  • Beltrán Medina, Pedro
  • García Diego, Fernando Juan|||0000-0002-7062-245X
The preventive conservation is based on acting on the causes of deterioration of cultural heritage to minimise damage, extending its lifetime and minimising the costs of restoration. In this paper, a quantitative method of recording and assessment of damage in frescoes is presented. Damage mapping has been performed with a colour scale of six values for two fresco paintings of two walls at Ariadne's House (Pompeii, Italy); subsequently, this information has been transferred to a data matrix which and statistical analysis of Variance (ANOVA) has been applied. ANOVA results show significant differences for the vertical and the horizontal axis depending on the different stages of damage. These differences also depend on the wall, which may be due to intrinsic differences such as materials of different restorations, the orientation of the wall, etc. or extrinsic differences and variations in temperature, relative humidity, etc. This methodology may be used in the future to quantify the influence of different variables on the extent of the deterioration of the paint layer, as for example determine and monitor its correlation to salts analytics in a determined facing., This work was partially supported by the Spanish Government (Ministerio de Economia y Competitividad) under projects HAR2013-47895-C2-1-P and HAR2013-47895-C2-2-P. This publication is part of the programme of valorisation and combined resources of the I + D + i of VLC/CAMPUS and has been partially supported by the Ministry of Education, Culture and Sports as part of the programme of international excellence campus (PAID 06-14).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Portable Dynamic Laser Speckle System for Sensing Long-Term Changes Caused by Treatments in Painting Conservation

  • Pérez Jiménez, Alberto José|||0000-0001-9059-0128
  • Perles, Angel|||0000-0002-5782-4284
  • Pérez-Marín, Eva|||0000-0003-3201-8451
  • García Diego, Fernando Juan|||0000-0002-7062-245X
  • Gonzalez-Peña, Rolando J.
  • Braga, Roberto, Jr.
[EN] Dynamic laser speckle (DLS) is used as a reliable sensor of activity for all types of materials. Traditional applications are based on high-rate captures (usually greater than 10 frames-per-second, fps). Even for drying processes in conservation treatments, where there is a high level of activity in the first moments after the application and slower activity after some minutes or hours, the process is based on the acquisition of images at a time rate that is the same in moments of high and low activity. In this work, we present an alternative approach to track the drying process of protective layers and other painting conservation processes that take a long time to reduce their levels of activity. We illuminate, using three different wavelength lasers, a temporary protector (cyclododecane) and a varnish, and monitor them using a low fps rate during long-term drying. The results are compared to the traditional method. This work also presents a monitoring method that uses portable equipment. The results present the feasibility of using the portable device and show the improved sensitivity of the dynamic laser speckle when sensing the long-term process for drying cyclododecane and varnish in conservation., This work was partially funded by Generalitat Valenciana project AICO/2016/058 and by the Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) under the project HAR2013-47895-C2-1-P and project HAR2017-85557-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation on the Use of Passive Microclimate Frames in View of the Climate Change Scenario

  • Verticchio, Elena
  • Frasca, Francesca
  • Siani, Anna Maria
  • García Diego, Fernando Juan|||0000-0002-7062-245X
[EN] Passive microclimate frames are exhibition enclosures able to modify their internal climate in order to comply with paintings¿ conservation needs. Due to a growing concern about the effects of climate change, future policies in conservation must move towards affordable and sustainable preservation strategies. This study investigated the hygrothermal conditions monitored within a microclimate frame hosting a portrait on cardboard with the aim of discussing its use in view of the climate expected indoors in the period 2041¿2070. Its effectiveness in terms of the ASHRAE classification and of the Lifetime Multiplier for chemical deterioration of paper was assessed comparing temperature and relative humidity values simultaneously measured inside the microclimate frame and in its surrounding environment, first in the Pio V Museum and later in a residential building, both located in the area of Valencia (Spain). Moreover, heat and moisture transfer functions were used to derive projections over the future indoor hygrothermal conditions in response to the ENSEMBLES-A1B outdoor scenario. The adoption of microclimate frames proved to be an effective preventive conservation action in current and future conditions but it may not be sufficient to fully avoid the chemical degradation risk without an additional control over temperature, This project received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 814624. This research was partially supported by the Plan Nacionalde I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) under project HAR2013-47895-C2-1-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the Minimum Sampling Frequency to Avoid Measurement Redundancy in Microclimate Field Surveys in Museum Buildings

  • García Diego, Fernando Juan|||0000-0002-7062-245X
  • Beltrán Medina, Pedro
  • Verticchio, Elena
  • Siani, Anna Maria
Monitoring temperature and relative humidity of the environment to which artefacts are exposed is fundamental in preventive conservation studies. The common approach in setting measuring instruments is the choice of a high sampling rate to detect short fluctuations and increase the accuracy of statistical analysis. However, in recent cultural heritage standards the evaluation of variability is based on moving average and short fluctuations and therefore massive acquisition of data in slowly-changing indoor environments could end up being redundant. In this research, the sampling frequency to set a datalogger in a museum room and inside a microclimate frame is investigated by comparing the outcomes obtained from datasheets associated with different sampling conditions. Thermo-hygrometric data collected in the Sorolla room of the Pio V Museum of Valencia (Spain) were used and the widely consulted recommendations issued in UNI 10829:1999 and EN 15757:2010 standards and in the American Society of Heating, Air-Conditioning and Refrigerating Engineers (ASHRAE) guidelines were applied. Hourly sampling proved effective in obtaining highly reliable results. Furthermore, it was found that in some instances daily means of data sampled every hour can lead to the same conclusions as those of high frequency. This allows us to improve data logging design and manageability of the resulting datasheets., The authors would like to thank the staff of the IVCR, especially director May Perez Garcia, and the owners of the paintings. This work was partially supported by the projects HAR2013-47895-C2-1-P and HAR2013-47895-C2-2-P from MINECO. Elena Verticchio thanks Sapienza Universita di Roma for the internship mobility grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High Frequency Data Acquisition System for Modelling the Impact of Visitors on the Thermo-Hygrometric Conditions of Archaeological Sites: A Casa di Diana (Ostia Antica, Italy) Case Study

  • Merello Giménez, Paloma
  • Scatigno, Claudia
  • García Diego, Fernando Juan|||0000-0002-7062-245X
  • Beltrán Medina, Pedro
[EN] The characterization of the microclimatic conditions is fundamental for the preventive conservation of archaeological sites. In this context, the identification of the factors that influence the thermo-hygrometric equilibrium is key to determine the causes of cultural heritage deterioration. In this work, a characterization of the thermo-hygrometric conditions of Casa di Diana (Ostia Antica, Italy) is carried out analyzing the data of temperature and relative humidity recorded by a system of sensors with high monitoring frequency. Sensors are installed in parallel, calibrated and synchronized with a microcontroller. A data set of 793,620 data, arranged in a matrix with 66,135 rows and 12 columns, was used. Furthermore, the influence of human impact (visitors) is evaluated through a multiple linear regression model and a logistic regression model. The visitors do not affect the environmental humidity as it is very high and constant all the year. The results show a significant influence of the visitors in the upset of the thermal balance. When a tourist guide takes place, the probability that the hourly temperature variation reaches values higher than its monthly average is 10.64 times higher than it remains equal or less to its monthly average. The analysis of the regression residuals shows the influence of outdoor climatic variables in the thermal balance, such as solar radiation or ventilation., The authors would like to thank the staff of the archaeological area of Ostia Antica for the permission to work in this house. This work is partially supported by the projects HAR2013-47895-C2-1-P and HAR2013-47895-C2-2-P from MINECO.