Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic aspects on [3+2] cycloaddition (32CA) reactions of azides to nitroolefins: A computational and kinetic study

  • Kawamura, Meire Y.
  • Alegre-Requena, Juan V.
  • Barbosa, Thaís M.
  • Tormena, Cláudio F.
  • Paton, Robert S.
  • Ferreira, Marco A. B.
[3+2] cycloadditions of nitroolefins have emerged as a selective and catalyst-free alternative for the synthesis of 1,2,3-triazoles from azides. We describe mechanistic studies into the cycloaddition/rearomatization reaction sequence. DFT calculations revealed a rate-limiting cycloaddition step proceeding via an asynchronous TS with high kinetic selectivity for the 1,5-triazole. Kinetic studies reveal a second-order rate law, and 13C kinetic isotopic effects at natural abundance were measured with a significant normal effect at the conjugated olefinic centers of 1.0158 and 1.0216 at the α and β-carbons of β-nitrostyrene. Distortion/interaction-activation strain and energy decomposition analyses revealed that the major regioisomeric pathway benefits from an earlier and less-distorted TS, while intermolecular interaction terms dominate the preference for 1,5- over 1,4-cycloadducts. In addition, the major regioisomer also has more favorable electrostatic and dispersion terms. Additionally, while static DFT calculations suggest a concerted but highly asynchronous Ei-type HNO2 elimination mechanism, quasiclassical direct-dynamics calculations reveal the existence of a dynamic intermediate., R.S.P. acknowledges support from the NSF (CHE-1955876) and computational resources from the RMACC Summit supercomputer supported by the National Science Foundation (ACI-1532235 and ACI-1532236), the University of Colorado Boulder and Colorado State University, and the Extreme Science and Engineering Discovery Environment (XSEDE) through allocation TG-CHE180056. J.V.A.-R. acknowledges support from XSEDE through allocation TG-CHE200033. J.V.A.R. acknowledges financial support through a Juan de la Cierva Incorporación contract from the Ministry of Science and Innovation (MCIN) and the State Research Agency (AEI) of Spain, and the European Union (NextGenerationEU/PRTR) under grant reference IJC2020-044217-I. M.A.B.F., C.F.T., and M.Y.K. are grateful to CNPq (405052/2021-9) and FAPESP (17/01754-0, 20/10246-0, and 20/01255-6) for financial support. This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES) – Finance Code 001., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of bis(amino acids) containing the styryl-cyclobutane core by photosensitized [2+2]-cross-cycloaddition of allylidene-5(4H)-oxazolones

  • Sierra, Sonia
  • Dalmau, David
  • Alegre-Requena, Juan V.
  • Pop, Alexandra
  • Silvestru, Cristian
  • Marín, María Luisa
  • Boscá, Francisco
  • Urriolabeitia, Esteban P.
The irradiation of 2-aryl-4-(E-3′-aryl-allylidene)-5(4H)-oxazolones 1 with blue light (456 nm) in the presence of [Ru(bpy)3](BF4)2 (bpy = 2,2′-bipyridine, 5% mol) gives the unstable cyclobutane-bis(oxazolones) 2 by [2+2]-photocycloaddition of two oxazolones 1. Each oxazolone contributes to the formation of 2 with a different C=C bond, one of them reacting through the exocyclic C=C bond, while the other does so through the styryl group. Treatment of unstable cyclobutanes 2 with NaOMe/MeOH produces the oxazolone ring opening reaction, affording stable styryl-cyclobutane bis(amino acids) 3. The reaction starts with formation of the T1 excited state of the photosensitizer 3[Ru*(bpy)3]2+, which reacts with S0 of oxazolones 1 through energy transfer to give the oxazolone T1 state 3(oxa*)-1, which is the reactive species and was characterized by transient absorption spectroscopy. Measurement of the half-life of 3(oxa*)-1 for 1a, 1b and 1d shows large values for 1a and 1b (10–12 μs), while that of 1d is shorter (726 ns). Density functional theory (DFT) modeling displays strong structural differences in the T1 states of the three oxazolones. Moreover, study of the spin density of T1 state 3(oxa*)-1 provides clues to understanding the different reactivity of 4-allylidene-oxazolones described here with respect to the previously reported 4-arylidene-oxazolones., E.P.U.: S.S. and D.D. thank the Spanish Government (Grant PID2019-106394GB-I00/AEI/10.13039/501100011033 funded by MCIN/AEI/10.13039/501100011033) and Gobierno de Aragón-FSE (Spain, research group Aminoácidos y Péptidos E19_20R) for funding. J.V.A.-R. thanks the Gobierno de Aragón-FSE (Spain, research group Química de Oro y Plata E07_20R), the Spanish Government (Grant PID2019-104379RB-C21/AEI/10.13039/501100011033, funded by MCIN/AEI/10.13039/501100011033, and Grant IJC2020-044217-I), and Red Española de Supercomputación (Grant QH-2023-1-0003) for funding. F.B. and M.L.M. thank the Spanish Government (Grant PID2019-110441RB-C33/AEI/10.13039/501100011033 funded by MCIN/AEI/10.13039/501100011033) for funding. A.P. and C.S. acknowledge the funding from the Romanian Ministry of Education and Research, CNCS—UEFISCDI, project number PN-III-P1-TE-2019-1342., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and computational studies of the production of 1,3-butadiene from 2,3-butanediol using SiO2-supported H3PO4 derivatives

  • Alegre-Requena, Juan V.
  • Hafenstine, Glenn R.
  • Huo, Xiangchen
  • Guan, Yanfei
  • Stunkel, Jim
  • Baddour, Frederick G.
  • Unocic, Kinga A.
  • Klein, Bruno C.
  • Davis, Ryan E.
  • Paton, Robert S.
  • Vardon, Derek R.
  • Kim, Seonah
Silica-supported phosphoric acid and metal phosphate catalyzed 1,3-butadiene (BDE) production from 2,3-butanediol (2,3-BDO) was studied using experimental and computational techniques. The catalyst was initially tested in a continuous flow reactor using commercially available 2,3-BDO, leading to maximum BDE yields of 63C%. Quantum chemical mechanistic studies revealed 1,2-epoxybutane is a kinetically viable and thermodynamically stable intermediate, supported by experimental demonstration that this epoxide can be converted to BDE under standard reaction conditions. Newly proposed E2 and SN2′ elementary steps were studied to rationalize the formation of BDE and all detected side-products. Additionally, using quantum mechanics/molecular mechanics (QM/MM) calculations, we modeled silica-supported phosphate catalysts to study the effect of the alkali metal center. Natural population analysis showed that phosphate oxygen atoms are more negatively charged in CsH2PO4/SiO2 than in H3PO4/SiO2. In combination with temperature-programmed desorption experiments using CO2, the results of this study suggest that the improved selectivity achieved when adding the metal center is related to an increase in the basicity of the catalyst., R.S.P. and J.V.A.-R. acknowledge the RMACC Summit supercomputer, supported by the NSF (ACI-1532235 and ACI1532236), and the Extreme Science and Engineering Discovery Environment (XSEDE) allocations TG-CHE180056 and TG-CHE200033. J.V.A.-R. acknowledges financial support through the Gobierno de Aragón-Fondo Social Europeo (Research Group E07_23R) and a Juan de la Cierva Incorporación contract from the Ministry of Science and Innovation (MCIN) and the State Research Agency (AEI) of Spain, and the European Union (NextGenerationEU/PRTR) under grant reference IJC2020-044217-I. S.K. acknowledges XSEDE allocation TG-CHE210034 and the National Renewable Energy Laboratory Computational Science Center. This work was authored in part by the National Renewable Energy Laboratory, managed and operated by Alliance for Sustainable Energy, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding was provided by U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Bioenergy Technologies Office and in collaboration with the Consortium for Computational Physics and Chemistry (CCPC) and the Chemical Catalysis for Bioenergy Consortium (ChemCatBio). G.R.H., X.H., F.G.B, K.A.U., B.C.K., R.E.D., and D.R.V. acknowledge funding from the Chemical Catalysis for Bioenergy consortium by the Bioenergy Technologies Office in the DOE Office of Energy Efficiency and Renewable Energy. Microscopy was performed in collaboration with the Chemical Catalysis for Bioenergy Consortium under contract no. DE-AC05-00OR22725 with Oak Ridge National Laboratory (ORNL) and through a user project supported by ORNL’s Center for Nanophase Materials Sciences (CNMS), which is sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, U.S. Department of Energy. Part of the microscopy research was also supported by the Office of Nuclear Energy, Fuel Cycle R&D Program and the Nuclear Science User Facilities. The results and analysis presented in this paper were partially possible thanks to the access granted to computing resources at the Galicia Supercomputing Center, CESGA, including access to the FinisTerrae supercomputer, the Red Española de Supercomputación (grant number QH-2023-1-0003) and the Drago cluster facility of SGAI-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AQME: Automated quantum mechanical environments for researchers and educators

  • Alegre-Requena, Juan V.
  • Sowndarya S. V., Shree
  • Pérez-Soto, Raúl
  • Alturaifi, Turki M.
  • Paton, Robert S.
AQME, automated quantum mechanical environments, is a free and open-source Python package for the rapid deployment of automated workflows using cheminformatics and quantum chemistry. AQME workflows integrate tasks performed across multiple computational chemistry packages and data formats, preserving all computational protocols, data, and metadata for machine and human users to access and reuse. AQME has a modular structure of independent modules that can be implemented in any sequence, allowing the users to use all or only the desired parts of the program. The code has been developed for researchers with basic familiarity with the Python programming language. The CSEARCH module interfaces to molecular mechanics and semi-empirical QM (SQM) conformer generation tools (e.g., RDKit and Conformer–Rotamer Ensemble Sampling Tool, CREST) starting from various initial structure formats. The CMIN module enables geometry refinement with SQM and neural network potentials, such as ANI. The QPREP module interfaces with multiple QM programs, such as Gaussian, ORCA, and PySCF. The QCORR module processes QM results, storing structural, energetic, and property data while also enabling automated error handling (i.e., convergence errors, wrong number of imaginary frequencies, isomerization, etc.) and job resubmission. The QDESCP module provides easy access to QM ensemble-averaged molecular descriptors and computed properties, such as NMR spectra. Overall, AQME provides automated, transparent, and reproducible workflows to produce, analyze and archive computational chemistry results. SMILES inputs can be used, and many aspects of tedious human manipulation can be avoided. Installation and execution on Windows, macOS, and Linux platforms have been tested, and the code has been developed to support access through Jupyter Notebooks, the command line, and job submission (e.g., Slurm) scripts. Examples of pre-configured workflows are available in various formats, and hands-on video tutorials illustrate their use., J.V.A.-R. acknowledges financial support through a Juan de la Cierva Incorporacion contract from the Ministry of Science and Innovation (MCIN), the State Research Agency (AEI) of Spain and the European Union (NextGenerationEU/PRTR) under grant reference IJC2020-044217-I, and the Gobierno de Aragon-Fondo Social Europeo (Research GroupE07_20R). R.S.P. acknowledges support from the NSF (CHE-1955876) and computational resources from the RMACCSummit supercomputer supported by the National Science Foundation (ACI-1532235 and ACI-1532236), the Universityof Colorado Boulder and Colorado State University, and the Extreme Science and Engineering Discovery Environment(XSEDE) through allocation TG-CHE180056, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic effects of active site conformational change in the allosteric activation of imidazole glycerol phosphate synthase

  • Klem, Heidi
  • Alegre-Requena, Juan V.
  • Paton, Robert S.
Imidazole glycerol phosphate synthase (IGPS) is a class-I glutamine amidotransferase (GAT) that hydrolyzes glutamine. Ammonia is produced and transferred to a second active site, where it reacts with N1-(5′-phosphoribosyl)-formimino-5-aminoimidazole-4-carboxamide ribonucleotide (PrFAR) to form precursors to purine and histidine biosynthesis. Binding of PrFAR over 25 Å away from the active site increases glutaminase efficiency by ∼4500-fold, primarily altering the glutamine turnover number. IGPS has been the focus of many studies on allosteric communication; however, atomic details for how the glutamine hydrolysis rate increases in the presence of PrFAR are lacking. We present a density functional theory study on 237-atom active site cluster models of IGPS based on crystallized structures representing the inactive and allosterically active conformations and investigate the multistep reaction leading to thioester formation and ammonia production. The proposed mechanism is supported by similar, well-studied enzyme mechanisms, and the corresponding energy profile is consistent with steady-state kinetic studies of PrFAR + IGPS. Additional active site models are constructed to examine the relationship between active site structural change and transition-state stabilization via energy decomposition schemes. The results reveal that the inactive IGPS conformation does not provide an adequately formed oxyanion hole structure and that repositioning of the oxyanion strand relative to the substrate is vital for a catalysis-competent oxyanion hole, with or without the hVal51 dihedral flip. These findings are valuable for future endeavors in modeling the IGPS allosteric mechanism by providing insight into the atomistic changes required for rate enhancement that can inform suitable reaction coordinates for subsequent investigations., J.V.A.-R. thanks the Red Española de Supercomputación (grant number QH-2023–1–0003), the Gobierno de Aragón-Fondo Social Europeo (Research Groups E07_23R), and the MCIN/AEI and NextGenerationEU (MCIN/AEI/10.13039/501100011033, IJC2020–044217-I). R.S.P. acknowledges support from the National Science Foundation (NSF CHE1955876) and computational resources from the RMACC Summit supercomputer supported by the NSF (ACI-1532235 and ACI-1532236), the University of Colorado Boulder and Colorado State University, and ACCESS through allocation TG-CHE180056., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoparticle-catalyzed transamination under tumor microenvironment conditions: A novel tool to disrupt the pool of amino acids and GSSG in cancer cells

  • Bonet-Aleta, Javier
  • Alegre-Requena, Juan V.
  • Martín-Martín, Javier
  • Encinas-Giménez, Miguel
  • Martín-Pardillos, Ana
  • Martín-Duque, Pilar
  • Hueso, José L.
  • Santamaría, Jesús
Catalytic cancer therapy targets cancer cells by exploiting the specific characteristics of the tumor microenvironment (TME). TME-based catalytic strategies rely on the use of molecules already present in the TME. Amino groups seem to be a suitable target, given the abundance of proteins and peptides in biological environments. Here we show that catalytic CuFe2O4 nanoparticles are able to foster transaminations with different amino acids and pyruvate, another key molecule present in the TME. We observed a significant in cellulo decrease in glutamine and alanine levels up to 48 h after treatment. In addition, we found that di- and tripeptides also undergo catalytic transamination, thereby extending the range of the effects to other molecules such as glutathione disulfide (GSSG). Mechanistic calculations for GSSG transamination revealed the formation of an imine between the oxo group of pyruvate and the free −NH2 group of GSSG. Our results highlight transamination as alternative to the existing toolbox of catalytic therapies., The authors are thankful for the financial support from the European Research Council (ERC) Advanced Grant CADENCE number 742684. J.V.A.-R. acknowledges Gobierno de Aragón-Fondo Social Europeo (Research Group E07_23R) and the State Research Agency (AEI) of Spain for financial support through a Juan de la Cierva Incorporación contract (reference: IJC2020-044217-I). J.V.A.-R. acknowledges the computing resources at the Galicia Supercomputing Center, CESGA, including access to the FinisTerrae supercomputer, the Red Española de Supercomputación (grant number QH-2023-1-0003) and the Drago cluster facility of SGAI-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ROBERT: Bridging the gap between machine learning and chemistry

  • Dalmau, David
  • Alegre-Requena, Juan V.
Beyond addressing technological demands, the integration of machine learning (ML) into human societies has also promoted sustainability through the adoption of digitalized protocols. Despite these advantages and the abundance of available toolkits, a substantial implementation gap is preventing the widespread incorporation of ML protocols into the computational and experimental chemistry communities. In this work, we introduce ROBERT, a software carefully crafted to make ML more accessible to chemists of all programming skill levels, while achieving results comparable to those of field experts. We conducted benchmarking using six recent ML studies in chemistry containing from 18 to 4149 entries. Furthermore, we demonstrated the program's ability to initiate workflows directly from SMILES strings, which simplifies the generation of ML predictors for common chemistry problems. To assess ROBERT's practicality in real-life scenarios, we employed it to discover new luminescent Pd complexes with a modest dataset of 23 points, a frequently encountered scenario in experimental studies., Juan V. Alegre-Requena and David Dalmau acknowledge Gobierno de Aragón-Fondo Social Europeo (Research Groups E07_23R and E17_23R) and the State Research Agency of Spain (MCIN/AEI/10.13039/501100011033/FEDER, UE) for financial support (IJC2020-044217-I, PID2022-140159NA-I00, and PID2019-106394GB-I00). Juan V. Alegre-Requena and David Dalmau acknowledge the computing resources at the Galicia Supercomputing Center, CESGA, including access to the FinisTerrae supercomputer and the Drago cluster facility of SGAI-CSIC. David Dalmau thanks Gobierno de Aragón-FSE for a PhD fellowship (2021–2025)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

AQME: Automated quantum mechanical environments for researchers and educators

  • Alegre-Requena, Juan V.
  • S. V., Shree Sowndarya
  • Pérez-Soto, Raúl
  • Alturaifi, Turki M.
  • Paton, Robert S.
AQME, automated quantum mechanical environments, is a free and open-source Python package for the rapid deployment of automated workflows using cheminformatics and quantum chemistry. AQME workflows integrate tasks performed across multiple computational chemistry packages and data formats, preserving all computational protocols, data, and metadata for machine and human users to access and reuse. AQME has a modular structure of independent modules that can be implemented in any sequence, allowing the users to use all or only the desired parts of the program. The code has been developed for researchers with basic familiarity with the Python programming language. The CSEARCH module interfaces to molecular mechanics and semi-empirical QM (SQM) conformer generation tools (e.g., RDKit and Conformer–Rotamer Ensemble Sampling Tool, CREST) starting from various initial structure formats. The CMIN module enables geometry refinement with SQM and neural network potentials, such as ANI. The QPREP module interfaces with multiple QM programs, such as Gaussian, ORCA, and PySCF. The QCORR module processes QM results, storing structural, energetic, and property data while also enabling automated error handling (i.e., convergence errors, wrong number of imaginary frequencies, isomerization, etc.) and job resubmission. The QDESCP module provides easy access to QM ensemble-averaged molecular descriptors and computed properties, such as NMR spectra. Overall, AQME provides automated, transparent, and reproducible workflows to produce, analyze and archive computational chemistry results. SMILES inputs can be used, and many aspects of tedious human manipulation can be avoided. Installation and execution on Windows, macOS, and Linux platforms have been tested, and the code has been developed to support access through Jupyter Notebooks, the command line, and job submission (e.g., Slurm) scripts. Examples of pre-configured workflows are available in various formats, and hands-on video tutorials illustrate their use.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of Bis(amino acids) containing the Styryl-cyclobutane Core by Photosensitized [2+2]-Cross-cycloaddition of Allylidene-5(4H)-oxazolones

  • Sierra, S.
  • Dalmau, D.
  • Alegre-Requena, J. V.
  • Pop, A.
  • Silvestru, C.
  • Marín, M. L.
  • Boscá, F.
  • Urriolabeitia, E. P.
The irradiation of 2-aryl-4-(E-3′-aryl-allylidene)-5(4H)-oxazolones 1 with blue light (456 nm) in the presence of [Ru(bpy)3](BF4)2 (bpy = 2,2′-bipyridine, 5% mol) gives the unstable cyclobutane-bis(oxazolones) 2 by [2+2]-photocycloaddition of two oxazolones 1. Each oxazolone contributes to the formation of 2 with a different C=C bond, one of them reacting through the exocyclic C=C bond, while the other does so through the styryl group. Treatment of unstable cyclobutanes 2 with NaOMe/MeOH produces the oxazolone ring opening reaction, affording stable styryl-cyclobutane bis(amino acids) 3. The reaction starts with formation of the T1 excited state of the photosensitizer 3[Ru*(bpy)3]2+, which reacts with S0 of oxazolones 1 through energy transfer to give the oxazolone T1 state 3(oxa*)-1, which is the reactive species and was characterized by transient absorption spectroscopy. Measurement of the half-life of 3(oxa*)-1 for 1a, 1b and 1d shows large values for 1a and 1b (10–12 μs), while that of 1d is shorter (726 ns). Density functional theory (DFT) modeling displays strong structural differences in the T1 states of the three oxazolones. Moreover, study of the spin density of T1 state 3(oxa*)-1 provides clues to understanding the different reactivity of 4-allylidene-oxazolones described here with respect to the previously reported 4-arylidene-oxazolones.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoparticle-Catalyzed Transamination under Tumor Microenvironment Conditions: A Novel Tool to Disrupt the Pool of Amino Acids and GSSG in Cancer Cells

  • Bonet-Aleta, Javier
  • Alegre-Requena, Juan Vicente
  • Martin-Martin, Javier
  • Encinas-Gimenez, Miguel
  • Martín-Pardillos, Ana
  • Martin-Duque, Pilar
  • Hueso, Jose L.
  • Santamaria, Jesus
Catalytic cancer therapy targets cancer cells by exploiting the specific characteristics of the tumor microenvironment (TME). TME-based catalytic strategies rely on the use of molecules already present in the TME. Amino groups seem to be a suitable target, given the abundance of proteins and peptides in biological environments. Here we show that catalytic CuFe2O4 nanoparticles are able to foster transaminations with different amino acids and pyruvate, another key molecule present in the TME. We observed a significant in cellulo decrease in glutamine and alanine levels up to 48 h after treatment. In addition, we found that di- and tripeptides also undergo catalytic transamination, thereby extending the range of the effects to other molecules such as glutathione disulfide (GSSG). Mechanistic calculations for GSSG transamination revealed the formation of an imine between the oxo group of pyruvate and the free −NH2 group of GSSG. Our results highlight transamination as alternative to the existing toolbox of catalytic therapies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

ROBERT: Bridging the gap between machine learning and Chemistry

  • Dalmau, David
  • Alegre-Requena, Juan V.
Beyond addressing technological demands, the integration of machine learning (ML) into human societies has also promoted sustainability through the adoption of digitalized protocols. Despite these advantages and the abundance of available toolkits, a substantial implementation gap is preventing the widespread incorporation of ML protocols into the computational and experimental chemistry communities. In this work, we introduce ROBERT, a software carefully crafted to make ML more accessible to chemists of all programming skill levels, while achieving results comparable to those of field experts. We conducted benchmarking using six recent ML studies in chemistry containing from 18 to 4149 entries. Furthermore, we demonstrated the program's ability to initiate workflows directly from SMILES strings, which simplifies the generation of ML predictors for common chemistry problems. To assess ROBERT's practicality in real‐life scenarios, we employed it to discover new luminescent Pd complexes with a modest dataset of 23 points, a frequently encountered scenario in experimental studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and computational studies of the production of 1,3-butadiene from 2,3-butanediol using SiO2-supported H3PO4 derivatives

  • Alegre-Requena, Juan V.
  • Hafenstine, Glenn R.
  • Huo, Xiangchen
  • Guan, Yanfei
  • Stunkel, Jim
  • Baddour, Frederick G.
  • Unocic, Kinga A.
  • Klein, Bruno C.
  • Davis, Ryan E.
  • Paton, Robert S.
  • Vardon, Derek R.
  • Kim, Seonah
Silica-supported phosphoric acid and metal phosphate catalyzed 1,3-butadiene (BDE) production from 2,3-butanediol (2,3-BDO) was studied using experimental and computational techniques. The catalyst was initially tested in a continuous flow reactor using commercially available 2,3-BDO, leading to maximum BDE yields of 63C%. Quantum chemical mechanistic studies revealed 1,2-epoxybutane is a kinetically viable and thermodynamically stable intermediate, supported by experimental demonstration that this epoxide can be converted to BDE under standard reaction conditions. Newly proposed E2 and SN2′ elementary steps were studied to rationalize the formation of BDE and all detected side-products. Additionally, using quantum mechanics/molecular mechanics (QM/MM) calculations, we modeled silica-supported phosphate catalysts to study the effect of the alkali metal center. Natural population analysis showed that phosphate oxygen atoms are more negatively charged in CsH2PO4/SiO2 than in H3PO4/SiO2. In combination with temperature-programmed desorption experiments using CO2, the results of this study suggest that the improved selectivity achieved when adding the metal center is related to an increase in the basicity of the catalyst.