Pasar al contenido principal

Fabricación aditiva y caracterización de nuevos materiales compuestos con actividad óptica

IJC2019-041128-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Synthesis of Silver Nanocomposites for Stereolithography: In Situ Formation of Nanoparticles

  • Valencia Liñán, Luisa María
  • Mata Fernández, María de la
  • Sanz de León, Alberto
  • Delgado González, Francisco Javier
  • Molina Rubio, Sergio Ignacio
Additive Manufacturing (AM) offers remarkable advantages in relation to traditional methods used to obtain solid structures, such as the capability to obtain customized complex geometries adapted to individual requirements. The design of novel nanocomposites suitable for AM is an excellent strategy to widen the application field of these techniques. In this work, we report on the fabrication of metal/polymer nanocomposites with enhanced optical/electrical behaviour for stereolithography (SLA). In particular, we analyse the in situ generation of Ag nanoparticles (NPs) from Ag precursors (AgNO3 and AgClO4) within acrylic resins via SLA. Transmission electron microscopy (TEM) analysis confirmed the formation of Ag NPs smaller than 5 nm in all nanocomposites, providing optical activity to the materials. A high density of Ag NPs with a good distribution through the material for the larger concentration of AgClO4 precursor tested was observed, in contrast to the isolated agglomerations found when the precursor amount was reduced to 0.1%. A significant reduction in the electrical resistivity up to four orders of magnitude was found for this material compared to the unfilled resin. However, consumption of part of the photoinitiator in the formation process of the Ag NPs contributed to a reduction in the polymerization degree of the resin and, consequently, degraded the mechanical properties of the nanocomposites. Experiments with longer curing times showed that, for the higher AgClO4 concentrations tested, post-curing times of 300 min allowed an 80% degree of polymerization to be achieved. These conditions turned these materials into promising candidates to obtain solid structures with multifunctional properties., This work has been co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (Ref: FEDER-UCA18-106586). Co-funding from UE and Junta de Andalucia (research group INNANOMAT, ref. TEP946) are also acknowledged. L. M. Valencia thanks FPI UCA Program. A.S. de Leon acknowledges Ministry of Science, Innovation and Universities for his Juan de la Cierva Incorporacion postdoctoral fellowship (IJC2019-041128-I). TEM/STEM measurements were carried out at the DME-SC-ICyT-ELECMI-UCA.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Polymer nanocomposites for plasmonics: In situ synthesis of gold nanoparticles after additive manufacturing

  • Hernández Saz, Jesús
  • Sanz de León, Alberto
  • Mata Fernández, María de la
  • Delgado González, Francisco Javier
  • Herrera Collado, Miriam
  • Molina Rubio, Sergio Ignacio
  • Giocondo, Michele
  • Di Cianni, Wera
A series of nanocomposites containing gold nanoparticles (AuNPs) are prepared by stereolithography (SL) by simply adding a precursor (KAuCl4) to a photoresist. A thermal treatment is performed after manufacturing the nanocomposites, triggering the reduction of KAuCl4 into AuNPs in solid state. In this approach, the photopolymerization of the resin and the formation of the AuNPs occur independently, allowing the optimization of these two processes separately. Advanced electron microscopy analyses reveal the distribution, size and morphology of the AuNPs synthesized within the resin, showing the influence of the gold precursor concentration and different thermal treatments. The localized surface plasmon resonance (LSPR) of the AuNPs modifies the optical properties of the 3D-printed nanocomposites, yielding transparent yet colored materials even for concentrations as low as 0.1 wt% KAuCl4. This behavior can be modelled by the Mie theory, correlating the macroscopic properties of the nanocomposites with the individual AuNPs embedded in the resin. The possibility of tuning the LSPR of the AuNPs together with the ability of manufacturing 3D-structures with sub-millimeter precision by SL, paves the way for the design of advanced platforms for plasmonics, such as sensors for surface enhanced Raman spectroscopy, 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Additive Manufacturing of Gold Nanostructures Using Nonlinear Photoreduction under Controlled Ionic Diffusion

  • Di Cianni, Wera
  • Mata Fernández, María de la
  • Delgado González, Francisco Javier
  • Desiderio, Giovanni
  • Molina Rubio, Sergio Ignacio
  • Sanz de León, Alberto
  • Giocondo, Michele
Multiphoton photoreduction of photosensitive metallic precursors via direct laser writing (DLW) is a promising technique for the synthesis of metallic structures onto solid substrates at the sub-micron scale. DLW triggered by a two photon absorption process is done using a femtosecond NIR laser (lambda = 780 nm), tetrachloroauric acid (HAuCl4) as a gold precursor, and isinglass as a natural hydrogel matrix. The presence of a polymeric, transparent matrix avoids unwanted diffusive processes acting as a network for the metallic nanoparticles. After the writing process, a bath in deionized water removes the gold precursor ions and eliminates the polymer matrix. Different aspects underlying the growth of the gold nanostructures (AuNSs) are here investigated to achieve full control on the size and density of the AuNSs. Writing parameters (laser power, exposure time, and scanning speed) are optimized to control the patterns and the AuNSs size. The influence of a second bath containing Au3+ to further control the size and density of the AuNSs is also investigated, observing that these AuNSs are composed of individual gold nanoparticles (AuNPs) that grow individually. A fine-tuning of these parameters leads to an important improvement of the created structures' quality, with a fine control on size and density of AuNSs., W.D.C. and M.G. acknowledge the support of the CNR Facility Beyond-Nano-Polo di Cosenza. W.D.C. acknowledges MIUR (Ministero dell'Istruzione, dell'Universita e della Ricerca-Italy) for her industrial PhD grant (PONa3_00362). This work was also funded by Ministry of Science, Innovation and Universities (project TEC2017-86102-C2-2-R) and Junta de Andalucia (Research group INNANOMAT, ref. TEP-946). Co-funding from UE is also acknowledged. A.S.d.L. and M.d.l.M. acknowledge Ministry of Science, Innovation and Universities for their Juan de la Cierva Incorporacion postdoctoral fellowships (IJC2019-041128-I, IJCI-2017-31507). SEM and TEM measurements were carried out at the DME-SC-ICyT-ELECMI-UCA. Document
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Plasmonic Characterization of 3D Printable Metal-Polymer Nanocomposites

  • Mata Fernández, María de la
  • Sanz de León, Alberto
  • Valencia Liñán, Luisa María
  • Molina Rubio, Sergio Ignacio
Plasmonic polymer nanocomposites (i.e., polymer matrices containing plasmonic nanostructures) are appealing candidates for the development of manifold technological devices relying on light-matter interactions, provided that they have inherent properties and processing capabilities. The smart development of plasmonic nanocomposites requires in-depth optical analyses proving the material performance, along with correlative studies guiding the synthesis of tailored materials. Importantly, plasmon resonances emerging from metal nanoparticles affect the macroscopic optical response of the nanocomposite, leading to far- and near-field perturbations useful to address the optical activity of the material. We analyze the plasmonic behavior of two nanocomposites suitable for 3D printing, based on acrylic resin matrices loaded with Au or Ag nanoparticles. We compare experimental and computed UV-vis macroscopic spectra (far-field) with single-particle electron energy loss spectroscopy (EELS) analyses (near-field). We extended the calculations of Au and Ag plasmon-related resonances over different environments and nanoparticle sizes. Discrepancies between UV-vis and EELS are dependent on the interplay between the metal considered, the surrounding media, and the size of the nanoparticles. The study allows comparing in detail the plasmonic performance of Au- and Ag-polymer nanocomposites, whose plasmonic response is better addressed, accounting for their intended applications (i.e., whether they rely on far- or near-field interactions).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Itaconic-Acid-Based Sustainable Poly(ester amide) Resin for Stereolithography

  • Vetri Buratti, Veronica
  • Sanz de León, Alberto
  • Maturi, Mirko
  • Sambri, Letizia
  • Molina Rubio, Sergio Ignacio
  • Comes Franchini, Mauro
Material science is recognized as a frontrunner in achieving a sustainable future, owing to its primary reliance upon petroleum-based chemical raw materials. Several efforts are made to implement common renewable feedstocks as an alternative to common fossil resources. For this purpose, additive manufacturing (AM) represents promising and effective know-how for the replacement of high energy- and resource-demanding processes with more environmentally friendly practices. This work presents a novel biobased ink for stereolithography, which has been formulated by mixing a photocurable poly(ester amide) (PEA) obtained from renewable resources with citrate and itaconate cross-linkers and appropriate photopolymerization initiators, terminators, and dyes. The mechanical features and the relative biocompatibility of 3D-printed objects have been carefully studied to evaluate the possible resin implementation in the field of the textile fashion industry., 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Self-Assembly of CsPbBr3Perovskites in Micropatterned Polymeric Surfaces: Toward Luminescent Materials with Self-Cleaning Properties

  • Sanz de León, Alberto
  • Mata Fernández, María de la
  • Sanchez-Alarcon, Ivan R.
  • Abargues, Rafael
  • Molina Rubio, Sergio Ignacio
In this work, we present a series of porous, honeycomb-patterned polymer films containing CsPbBr3 perovskite nanocrystals as light emitters prepared by the breath figure approach. Microscopy analysis of the topography and composition of the material evidence that the CsPbBr3 nanocrystals are homogeneously distributed within the polymer matrix but preferably confined inside the pores due to the fabrication process. The optical properties of the CsPbBr3 nanocrystals remain unaltered after the film formation, proving that they are stable inside the polystyrene matrix, which protects them from degradation by environmental factors. Moreover, these surfaces present highly hydrophobic behavior due to their high porosity and defined micropatterning, which is in agreement with the Cassie-Baxter model. This is evidenced by performing a proof-of-concept coating on top of 3D-printed LED lenses, conferring the material with self-cleaning properties, while the CsPbBr3 nanocrystals embedded inside the polymeric matrix maintain their luminescent behavior., This work was funded by the Ministry of Science, Innovation and Universities (project TEC2017-86102-C2-2-R) and Junta de Andalucía (Research group INNANOMAT, ref. TEP-946) and co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (ref: FEDER-UCA18-106586). Co-funding from UE is also acknowledged. A.S.d.L. acknowledges the Ministry of Science, Innovation and Universities for his Juan de la Cierva Incorporación postdoctoral fellowship (IJC2019-041128-I). R.A. also acknowledges the support of the Spanish MINECO through projects: Retos-Colaboración 2016 Project Safetag (no. RTC-2016-5197-2) and Retos de la Sociedad Project Nirvana (no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/ 501100011033 and the “Agencia Valenciana de la Innovació” for the Valorització 2018 Project Hidronio (no. INNVAL10/ 18/032) and Valorització 2021 Project CATIOX (no. INNVA1/2021/56). R.A. also thanks the Spanish MINECO for their Ramón y Cajal Fellowship (no. RYC-2015-18349). SEM and TEM measurements were carried out at the DME-SCICyT- ELECMI-UCA.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Additive Manufacturing of Thermoplastic Polyurethane-Cork Composites for Material Extrusion Technologies

  • Alvarez Gómez, Mario
  • Moreno Nieto, Francisco Daniel
  • Moreno Sánchez, Daniel
  • Sanz de León, Alberto
  • Molina Rubio, Sergio Ignacio
Among the material extrusion technologies of additive manufacturing, fused granular fabrication is playing a bigger role in the industry. The increase in the size of printers demands extrusion systems with higher deposition rates that facilitate printing larger parts in shorter times with a need for cost reduction. This cost reduction in fused granular fabrication systems is due to the utilisation of pellets as the material source for the prints, such as pellets that are the most common way of distributing polymeric materials in industry and do not need the usual previous transformation into filaments. Most of the polymers in the industry can be found in the shape of pellets, so the opportunities for developing new materials beside the traditional filaments found in the market are expanding. In this research, a novel composite material has been developed based on the blending of commercial thermoplastic polyurethane (TPU) and cork particles obtained from industrial waste at different concentrations. These materials have been processed at a laboratory scale, and their mechanical, thermal and rheological properties have been studied. Despite a 53.52% reduction in the maximum stress on the x-axis, an 81.82% decrease in the values obtained with specimens oriented on the z-axis and a shortage in the deformation values, the results reveal a remarkable weight reduction leading to 21.31% when compared to the TPU of the blends,. These results may open a path to further explore these blends and find suitable applications in industry as proposed.