Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness-based assessment and monitoring of steel truss railway bridges to prevent progressive collapse

  • Porcu, Maria Cristina
  • Garau, Michele
  • Cocco, Mariano F.
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Risks of bridge collapse were and continue to be real as evidenced by classical (e.g. Québec Bridge, Canada 1919; Seongsu Bridge, South Korea 1994) and recent (e.g. Skagit River Bridge, USA 2013; Francis Scott Key Bridge, USA 2024) episodes of catastrophic collapses. The causes of each collapse are diverse (e.g. natural disasters, changing conditions, design errors, intentional attacks). Still, the conclusions are always the same: deaths, injuries and large amounts of direct and indirect economic losses. In order to avoid these catastrophes, structural robustness and monitoring strategies can be used to analyse the bridge¿s vulnerability and anticipate any local-initial failure that can spread to the whole structure in the form of a progressive collapse. The objective of this work was to use an integrative threat-dependent and threat-independent approach to analyse the structural robustness of a never-before-studied U-shaped open cross-section steel truss railway bridge structure. Eight failure scenarios were considered and analysed through computational modelling. The extracted results make it possible: (i) to connect structural robustness analysis outputs with the definition of a new structural health monitoring strategy of the bridge; and (ii) to implement the conclusions in the real bridge with more than 100 sensors and a non-assisted alarm system for preventing progressive collapse., The authors wish to acknowledge the funding received by Grant PID2021-124236OB-C31 funded by MCIN/AEI/10.13039/501100011033 and ERDF A Way of Making Europe , and for funding received under the postdoctoral Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . We would also like to extend our gratitude to the Calsens Spin-Off company Members, Ferrocarrils de la Generalitat Valenciana (FGV), and the Multimedia Communication Group (COMM) of the iTeam Research Institute of the UPV for their invaluable cooperation and recommendations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Tests on a Full-Scale Precast Building for Robustness Assessment

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As modern society faces unprecedented challenges related to climate stability and conflict, the need to design more sustainable and resilient buildings is undeniable. Several studies show that building with precast concrete components can result in significant advantages with respect to sustainability. However, the fact that such structures exhibit clear lines of weakness at the joints between elements can make them more vulnerable to progressive collapse. Although this can be overcome by adequate detailing of connections, there exist several uncertain factors which may affect the interaction between different precast elements and the global behaviour of such structural systems. This means that experimental testing is usually required for safe development of adequate solutions. Despite this fact, there have been very few studies on the robustness of precast concrete structures when compared to research on cast-in-place and steel structures. As such, this work presents the results of an ambitious experimental campaign involving the sudden removal of 3 different columns from a specifically built 15 m x 12 m two-storey precast concrete building incorporating simple and practical solutions to enhance robustness., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would like to acknowledge the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/ 10.13039/501100011033 and ¿ERDF A way of making Europe¿. The authors would also like to express their gratitude for funding received under the postdoctoral programs of Generalitat Valenciana/European Social Fund [APOSTD/2019/101] and grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by ¿European Union NextGenerationEU/PRTR¿. The help and support provided by Ayman El-Fouly (Applied Science International) for performing simulations in ELS is also gratefully acknowledged. Finally, the authors are also grateful for the invaluable cooperation of the Levantina, Ingeniería y Construcción S.L. (LIC) company, and the contribution of members and collaborators of the Building Resilient research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Natural fuse-segmentation to arrest failure propagation in precast concrete buildings

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Oliver-Cano, Marina
  • Tasquer-Val, Daniel
  • Sempertegui, Geovanny
[EN] Our previous work on precast construction has shown that sufficient structural robustness can be achieved by adequately designing the connection detailing to withstand a sudden column removal under the accidental load scenario. However, the behaviour of such a system under larger initial failure has not been investigated to date. This article presents one of the recent tests carried out by the Building Resilient research group of the Universitat Politècnica de València, where a full-scale precast building of 2 storeys (6 m) and 3 x 2 spans (15 x 12 m2) has been tested under removal of three columns. Preliminary computational simulations were performed using the applied element method (AEM) to design the load scenarios. The test results indicated that the precast system has a natural segmentation ability, which is beneficial to arrest the failure propagation, limiting the collapse extent to a minimum., This article is written as a part of a research project (Endure) funded by the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral program IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improving building robustness through fuse-segmentation

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As the impacts of climate change and emerging conflicts become more and more apparent, it is undeniable that more robust building structures are required for resilient societies to be able to thrive. In fact, there has been a growing research effort over the past few decades on structural robustness and progressive collapse. As a result, several building codes now include specific provisions for improving the progressive collapse resistance of building structures. At present, almost all methods for improving structural robustness included in relevant codes rely on providing extensive continuity within a structural system to ensure that alternative load paths are available to redistribute loads supported by a structural component after its failure. Although this approach has proven to be effective in many cases, certain situations do exist for which it may increase the risk of disproportionate collapse. These include, for example, cases of large initial failure or of buildings with wide spans between columns. In such situations, the remaining parts of a structural system may not be able to find a stable state of equilibrium after initial failure. Having extensive continuity can contribute to the collapsing part pulling down the rest of the structure. A possible approach for arresting failure propagation in these situations involves segmenting building structures. In fact, there exist several examples of real occurrences when the extent of a collapse was limited thanks to a building being segmented into different parts. This includes the partial collapse of the Pentagon (Washington, 2001) and of the terminal 2E building at Charles de Gaulle airport (Paris, 2004). Although segmentation was not necessarily introduced in building design for improving robustness in these cases, they do demonstrate its effectiveness in limiting the extent of progressive collapse. However, segmentation with weak borders does interrupt continuity, which has already proven its efficiency for redistributing loads in the case of small initial failures. To overcome this limitation, there exists the possibility of using structural fuses to connect different segments of a structure. Such fuses should be able to provide continuity for normal and accidental design situations considered by current building codes but would separate building segments when failure propagation is inevitable. In fact, a novel fuse-based segmentation design approach to limit the propagation of failures in building structures is currently being developed by the Endure project thanks to a grant of €2.5 million awarded by the European Research Council. This paper presents the framework being used within this project to i) develop a performance-based approach for the design of fuse-segmented buildings, ii) design and test structural fuses for selected building types, and iii) implement and validate the performance of structural fuses in full-scale buildings., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for the postdoctoral Grant IJC2020- 042642-I funded by MCIN/AEI/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Corner-column failure scenarios in building structures: Current knowledge and future prospects

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Shahnazi, Ghobad
[EN] Over the past few decades, increasing awareness of the need for more resilient infrastructure has led to a great increase in the amount of research being performed on the progressive collapse and structural robustness of buildings. Due to their widespread use, much of this research has focused on framed structures. Given the important role of columns in this type of structure, the analysis of the effect of their failure on structural systems has emerged as one of the most useful tools for studying structural robustness. However, the majority of such studies have focused on the removal of internal or edge columns rather than corner columns, which are in principle more vulnerable in many aspects. Although this situation suggests that more research may be needed to improve our understanding in this regard, the large amount of research performed in the field of progressive collapse means that it can be challenging to identify and prioritise the most important research needs. This review article aims to address this challenge through a comprehensive overview and analysis of past research involving corner-column failure scenarios in cast-in-place reinforced concrete (RC), precast concrete, and steel framed buildings. This analysis has made it possible to establish the most important research findings on corner- column failures, to define the limitations of what has been done so far, and to identify the most significant gaps in knowledge to be prioritised by future research., The authors would like to express their gratitude for funding received under grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/ PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Natural fuse-segmentation to arrest failure propagation in precast concrete buildings

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Oliver-Cano, Marina
  • Sempertegui, Geovanny
[EN] The use of precast concrete structures is rapidly increasing worldwide because of their advantages in terms of quality, safety, sustainability, and speed of construction. In the field of progressive collapse of structures, few experimental studies have been carried out to investigate its structural integrity or robustness when subjected to a local initial failure. Previous work by the authors has shown that sufficient structural robustness can be achieved by properly designing the connection detailing between the structural components to withstand a sudden column removal under the accidental load combination defined in the codes. However, some aspects remain open for scientific discussions, such as: ¿What would happen if the initial failures were not limited to the failure of a single column?¿. In such a scenario (multiple column removals or other large initial disturbances), it has been shown that the probability of local collapse propagating to the rest of the structure is significantly higher. This article presents one of the recent tests carried out by the Building Resilient research group of the Universitat Politècnica de València, where a full-scale precast building of 2 storeys (6m) and 3 x 2 spans (15 x 12 m2) has been tested under removal of three columns. The results indicate that the way in which the detailing was provided to the precast elements allowed the system to arrest the failure propagation and limit the collapse extent to a minimum. It can be argued that precast concrete structures naturally have fused connections that take advantage of continuity for small initial failures yet automatically segment the building into individual parts when failure propagation is inevitable., This article is written as part of a research project (Endure) funded by the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral program IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustez estructural de edificios en España. Investigaciones recientes en la Universitat Politècnica de València, Structural Robustness of Buildings in Spain. Recent Research at the Universitat Politècnica de València

  • Rueda-García, Lisbel|||0000-0002-2061-1656
  • Barros-González, Brais|||0000-0001-7132-5951
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[ES] El incremento constante de eventos extremos hace necesario contar con edificios robustos capaces de soportar daños iniciales locales sin que se produzca una propagación de fallos que afecte a toda o gran parte de la estruc-tura. Este artículo analiza el estado actual de la normativa y la investigación en España sobre robustez estructural de edificios, más concretamente aquella llevada a cabo en la Universitat Politècnica de València, proporcionando una visión global sobre robustez tanto para profesionales del sector como investigadores. Aunque el Código Es-tructural español menciona la necesidad de edificios robustos, carece de indicaciones claras sobre su implementa-ción, lo que lleva a la posible adopción de normativas internacionales, como el Eurocódigo 1 Parte 1-7 o la UFC 4-023-03 de EE.UU. Estas normativas contemplan diferentes estrategias para diseñar edificios robustos, entre las que destacan el método de las fuerzas de atado, el método de los caminos de carga alternativos y el diseño de elementos clave. Las características principales de estos métodos también se describen en este artículo. A nivel de investigación, España presenta avances significativos ya que existen importantes proyectos que introducen estrategias innovadoras tanto para mejorar la robustez de estructuras existentes como para frenar el colapso una vez éste se ha iniciado. Estos proyectos destacan el potencial nacional en el desarrollo de enfoques avanzados y efectivos en materia de robustez., Este trabajo no habría sido posible sin el apoyo de la Generalitat Valenciana por la subvención otorgada al proyecto ENHANCE (CIPROM/2022/47), así como al MCIN/ AEI/10.13039/501100011033 y a la "Unión Europea NextGenerationEU/PRTR" por la financiación recibida a través de la beca postdoctoral IJC2020-042642-I. Asimismo, los autores agradecen el apoyo recibido para el desarrollo del proyecto ENTIRE, financiado en el marco de la convocatoria de Ayudas para Primeros Proyectos de Investigación (PAID-06-22) del Vicerrectorado de Investigación de la Universitat Politècnica de València. De igual manera, este artículo forma parte del proyecto ENFORCE, financiado por la convocatoria PAID-06-24 del mismo Vicerrectorado.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Simplified Modelling Strategy For Evaluating Failure Propagation In Reinforced Concrete Structures

  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Setiawan, Andri
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The progressive collapse of reinforced concrete (RC) structures involves a series of complex loadresisting mechanisms, including flexural, arching and catenary actions, among others. A detailed model comprised of 3D-solid elements with refined mesh and complex material models is typically adopted to accurately simulate these phenomena in new or existing buildings. However, this approach is computationally expensive and unsuitable for practical applications, especially when dealing with large models of real buildings. This study proposes practical modelling strategies that balance the accuracy of an RC structural response to an initial failure with a practical method of preparing and analysing the models. The proposed modelling approaches include a) the PMM¿lumped hinge (based on the FEMA- 356 guideline), b) a modification to the FEMA hinge, and c) the fibre¿distributed hinge. Several progressive collapse tests from the literature were simulated on RC subassemblies with various boundary conditions and loading scenarios from the literature to systematically validate and compare the different approaches. The results revealed that the PMM-lumped approach cannot accurately simulate the structure¿s response under large deformation mode (catenary) where plastic hinges (yielding of reinforcement) are typically formed at a more extended region along the member. The present study suggests that the fibre-distributed hinge is the most suitable approach for simulating the progressive collapse of structures. This finding is pertinent (yet also alarming) as some new studies in the progressive collapse field still adopt the traditional PMM-hinge approach, which may eventually lead to invalid conclusions., This article is written as part of the Endure Research Project funded by the European Research Council (ERC) under the European Union¿s Horizon 2020 Research and Innovation Programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral program IJC2020-042642-I, funded by MCIN/AEI/10.13039/501100011033 and the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An ML-based framework for predicting prestressing force reduction in reinforced concrete box-girder bridges with unbonded tendons

  • Calò, Mirko
  • Ruggieri, Sergio
  • Nettis, Andrea
  • Uva, Giuseppina
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper presents a machine learning (ML) based framework to predict the prestressing force reduction in prestressed reinforced concrete (PSC) box-girder bridges with unbonded tendons. In the field of road network safety, the reliable assessment of some bridge typologies, such as PSC box-girder bridges, depends on different aspects, among which the inaccessibility of internal unbonded tendons, the difficulty in measuring the effective prestressing force reduction over time, the design of an efficient structural health monitoring (SHM) system. To address the above issues, the proposed approach exploits the results of experimental tests on a scaled PSC box-girder to validate a nonlinear modelling strategy and, in turn, to generate a sample dataset for training different ML algorithms. To ensure generalizability of the proposed ML model, the variability of several parameters, including geometrical and mechanical properties, was accounted for. The obtained results, evaluated in terms of statistical metrics and through an eXplainability approach, revealed that the proposed surrogate model is able to predict the prestressing force reduction for this bridge typology, knowing the current prestressing force, the elastic modulus of the concrete, and the strain variation in specific cross-sections of the structure. The application of the framework on a scaled PSC box-girder experimentally tested, demonstrated its suitability for: i) estimating the prestressing force reduction without employing periodic and expensive onsite tests; and ii) providing the best strategy for employing a sensor-based SHM system., Mirko Calo ` acknowledges funding by Italian Ministry of University and Research, within the project PON-Ricerca e Innovazione2014 2020, CUP Code (D.M. 10/08/2021, n. 1061): D95F21002340006. Sergio Ruggieri acknowledges funding by Italian Ministry of University and Research, within the project PON-Ricerca e Innovazione-2014 2020, CUP Code (D.M. 10/08/2021, n. 1062): D95F21002140006. Manuel Buitrago declares funding received under the postdoctoral Grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by the European NextGenerationEU/ PRTR . Andrea Nettis and Giuseppina Uva acknowledge the Sustainable Mobility National Research Center (MOST) and received funding from the European Union Next-GenerationEU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR) MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4 D.D. 1033 17/06/2022, CN00000023) - SPOKE 7 CCAM, Connected Networks and Smart Infrastructure - WP4 (CUP D93C22000410001). Finally, Jose M. Adam and all co-authors acknowledge the invaluable cooperation of the Calsens Spin-off company during the execution of the test of the scaled bridge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Failure analysis after the progressive collapse of a precast building

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Setiawan, Andri
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Gerbaudo, Maria Luz|||0009-0003-2838-0316
  • Marin, Lorenzo|||0000-0002-7117-1291
  • Cetina-Berdugo, Diego Fernando|||0009-0008-2884-9694
  • Caredda, Giacomo|||0000-0002-6888-0409
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
  • Sempértegui, Geovanny
[EN] As buildings have to face more frequent and intense extreme events due to a changing climate and rising geopolitical tensions, the need for more robust structures that are insensitive to initial failures is now arguably more important than ever before. In this context, this article presents an in-depth analysis of the damage and failures that occurred during the partial progressive collapse test of a purposely built 15×12 m precast building with two floors. The building was designed to ensure load redistribution after the failure of single columns and also to segment parts of the structure from a larger initial failure that inevitably triggers a collapse. The ability of the structure to arrest collapse propagation was tested experimentally successfully isolating the collapse to the initially affected area. Based on visual inspections supported by computational simulations, failure mechanisms occurring in the collapsed area and damages in the upright part of the structure are analysed in detail in this article. Mechanisms that enabled the separation of the building in two parts are also studied. The presented results lead to an improved understanding of failure mechanisms causing collapse propagation and provide insights on how such propagation can be arrested., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral Grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR", for funding received by the First Research Projects call (PAID-06-22) from the Vice-rectorate for Research of the Universitat Politecnica de Valencia, and for funding for open access charge by CRUE- Universitat Politecnica de Valencia. The research presented in this article would not have been possible without the assistance of the following colleagues from the ICITECH institute in preparing and executing the full-scale building test: Juan J. Moragues, Pedro A. Calderon, Daniel Tasquer, Ana Sanchez-Rodriguez, Eduardo J. Mezquida-Alcaraz and Ghobad Shahnazi. The authors are also grateful to the Levantina, Ingenieria y Construccion S.L. (LIC) company for providing human resources and access to their facilities for testing. Finally, the authors wish to thank Ayman Elfouly and Applied Science International-LLC for their support in performing simulations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness of a full-scale precast building structure subjected to corner-column failure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Moragues, Juan J|||0000-0001-8111-5480
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] Although many analytical and experimental studies have been carried out to date on the progressive collapse and robustness of cast-in-place reinforced concrete (RC) and steel building structures, very few experimental research works have been performed on precast concrete (PC) structures. The small number of publications on these experiments have focused on analysing the behaviour of subassemblies after the sudden loss of an internal column. This paper is the first to describe the construction of a full-scale purpose-built experimental PC building to study the sudden removal of corner columns and the structure¿s ability to find alternative load paths (ALPs). The connections between the precast members were designed using existing simplified guidance for robustness. The results obtained from the test using gravity loads corresponding to typical load combinations defined in building codes for accidental design situations, showed a structural response governed by Vierendeel action with a clear contribution from the floor slabs. Load increase factors were obtained from the test results which can be applied by practitioners using simplified linear finite element models to account for non-linear dynamic effects in a simplified manner. This work is expected to form part of a large database of experimental results that are useful for developing advanced numerical simulations and parametric analyses., The authors wish to acknowledge the grant awarded for the PRE-BUST project (ref: BIA2017-88322-R-AR) funded by MCIN/AEI/10.13039/501100011033 and " ERDF A Way of Making Europe " . The authors would also like to express their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the " European Union NextGenerationEU/PRTR " . We are also grateful for the invalu- able cooperation of the company Levantina, Ingeniena y Construccion S.L. (LIC) and the contribution of the members and collaborators of the Building Resilient research group (Pedro A. Calderon, Daniel Tasquer, Ghobad Shahnazi, Ana Sanchez, Lorenzo Marin, Giacomo Caredda, Diego F. Cetina, Maria L. Gerbaudo, Marina Oliver) . We would like to give special thanks to Eduardo J. Mezquida-Alcaraz for his work in preparing and carrying out the test.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness of a full-scale precast building structure after edge column failure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] A full-scale purposely built precast concrete building, designed to comply with robustness requirements in current building codes, was subjected to two different scenarios of sudden edge-column removal under the accidental load combination established by the codes. The main aim of this study was to assess how the structural system can prevent collapse initiation after the removal of a single edge column at different locations. This building was later subjected to a larger initial failure with the aim of arresting collapse propagation as part of another piece of research and outside the scope of this specific study. The building was highly instrumented providing unique data at a building system level for the understanding of the development of alternative load paths after the column removals. This work is novel since existing tests of edge-column removal from precast systems correspond mostly to simplified beam-column-slab subassemblies where the interaction with the rest of the building is neglected. The results obtained from this work are particularly relevant towards understanding the role of tying systems used in precast concrete buildings under different accidental scenarios using typical load combinations defined in building codes. The structure was able to redistribute the loads after each column was removed due to a combination of Vierendeel and compressive arching and membrane actions, leading to very small deflections. The role of vertical, horizontal, and floor tying systems in providing continuity between prefabricated and hybrid members was analysed in view of the experimental results obtained. The response obtained differed significantly from design assumptions commonly adopted for tying systems that rely on tensile catenary action at large deflections. This research is timely considering the push to adopt prefabricated components in building construction driven by Net Zero targets while maximising robustness of buildings subjected to more extreme events exacerbated by climate change., The authors wish to acknowledge the funding received by Grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and "ERDF A Way of Making Europe", and by a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101000396) . The authors would also like to ex-press their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGener-ationEU/PRTR". We are also grateful for the invaluable cooperation of the company Levantina, Ingenieria y Construccion S.L. (LIC) and the contribution of the members and collaborators of the ICITECH research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Robustez de estructuras prefabricadas de hormigón: simulación computacional mediante applied element method

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[ES] El colapso progresivo puede definirse como el proceso por el cual un daño local inicial pone en marcha una cadena de fallos, que a veces puede conducir a un colapso desproporcionado o total. Se trata de un fenómeno que a menudo puede ser desencadenado por cargas anormales causadas por eventos extremos, a los que pueden estar expuestos todo tipo de edificios. A pesar de que las estructuras prefabricadas de hormigón, cada vez más utilizadas, pueden ser especialmente vulnerables al colapso progresivo, se han realizado relativamente pocos estudios sobre la robustez de esta tipología estructural en comparación con las estructuras hormigonadas in situ. Los modelos computacionales validados a partir de resultados experimentales son una de las herramientas más prometedoras para comprender mejor la respuesta de las estructuras prefabricadas de hormigón frente a acciones accidentales. Este trabajo presenta el empleo de una nueva estrategia de modelización, el Applied Element Method, que se ha empleado para predecir el comportamiento de un edificio-probeta de hormigón prefabricado bajo diferentes escenarios de retirada de columnas. Estos resultados se han utilizado para planificar la estrategia de monitorización y el esquema de carga para las pruebas experimentales en una estructura real de dos plantas de 15 m x 12 m que se construirá y monitorizará durante la retirada repentina de tres columnas diferentes., El trabajo presentado en este artículo no habría sido posible sin la financiación recibida del Ministerio de Ciencia e Innovación para el proyecto PREBUST (BIA2017-88322-R-AR) y para la ayuda Juan de la Cierva-Incorporación (IJC2020-042642-I). Los autores desean agradecer a Pedro A. Calderón y Juan J. Moragues su inestimable ayuda y apoyo. También se agradece a Ayman El-Fouly, de Applied Science International, su inestimable colaboración.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Incorporación de una nueva última línea de defensa frente a colapsos progresivos en estructuras de hormigón prefabricadas, Incorporating a new last line of defence against progressive collapse in precast concrete structures

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The paper describes a new design approach, so-called hierarchy-based collapse isolation, to arrest failure propagation in buildings. The approach ensures that buildings have sufficient resistance to withstand loads under operational conditions and small initial failures. Yet, some connector elements are deliberately designed to break to isolate the collapse when failure propagation is inevitable. To validate the proposed concept, a two-storey purpose-built precast building specimen with 12 m × 15 m plan dimensions was tested and the main findings are discussed here. The work is expected to promote the wider adoption of robust precast systems, contributing to more resilient and sustainable buildings., Este artículo forma parte de un proyecto (Endure) que ha recibido financiación del Consejo Europeo de Investigación (ERC) en el marco del programa de investigación e innovación Horizonte 2020 de la Unión Europea (Grant agreement No. 101000396). Los autores también desean expresar su agradecimiento por la financiación recibida en el marco de los programas postdoctorales IJC2020-042642-I financiada por MCIN/AEI/10.13039/501100011033 y por la «NextGenerationEU/PRTR» de la Unión Europea, de la Generalitat Valenciana/Fons Social Europeu [CIAPOS/2023/216] y del proyecto Evolve (ref. CIGE/2023/199).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Colapso progresivo y robustez de edificios y puentes, Progressive collapse and robustness of buildings and bridges

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
[ES] Los últimos años han estado marcados por un número cada vez más elevado de estudios sobre el colapso progresivo y la robustez estructural como consecuencia de la persistente aparición y aparentemente creciente frecuencia de fallos estructurales catastróficos. En la actualidad, la gran mayoría de estos estudios se centran en simulaciones computacionales y en pruebas de laboratorio de subestructuras a escala reducida. Aunque esta filosofía de estudio ha permitido avanzar sustancialmente en la materia, estas estrategias se caracterizan por sus importantes limitaciones, que sólo pueden superarse mediante ensayos a escala real de las estructuras. Este artículo presenta algunos de los principales trabajos de investigación realizados en este sentido por el grupo de investigación Building Resilient del instituto ICITECH de la Universitat Politècnica de València. Se presentan los trabajos más importantes relacionados con el cimbrado de edificios, las estructuras de edificios de hormigón armado ejecutadas in situ y prefabricadas, los puentes metálicos en celosía y los edificios segmentados por fusibles, junto con los resultados más significativos obtenidos hasta el momento., Estos trabajos no hubieran dado sus frutos sin la financiación y ayuda recibidas por: FGV (Ferrocarrils de la Generalitat Valenciana), Calsens, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Ministerio de Educación y Formación Profesional, Fundación BBVA, European Research Council, LIC Levantina, Ingeniería y Construcción, y Encofrados Alsina.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Framework for Improving Building Robustness Through Segmentation

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
[EN] The protection of buildings and infrastructures from extreme abnormal events due to natural hazards (e.g. hurricanes, floods), accidents (e.g. vehicle impact, gas explosions, unexpected failure due to poor design or lack of maintenance) and malicious actions (e.g. terrorist attacks), is currently of great societal and scientific concern. To prevent the spreading of a local-initial damage into progressive collapse, the current design philosophies consider that when a critical element fails (e.g. column, load-bearing wall), continuity structural details should provide alternative load paths to redistribute the load of the failed element to the rest of the structure. Although this strategy is valid in certain situations (e.g. small initial failure), in others (e.g. large initial failure due to blast loading), it has proved to be mistaken and has led to disastrous consequences. Over recent years, a debate has emerged about whether or not segmentation can improve a building¿s capacity to arrest progressive collapse. Segmenting a building into individual parts can prevent failures in one zone from propagating to other parts of the structure, as was the case, for example, in the Pentagon (2001) and Terminal 3 of the Charles de Gaulle Airport (2004). However, segmentation breaks continuity, which works well for small initial failure scenarios. In the context of an ERC-Consolidator Grant project, the use of structural fuses has been proposed. While fuses will provide continuity under normal loads or for small local-initial failures currently considered by relevant standards, they will separate to prevent disproportionate collapse during more extreme situations when failure propagation is inevitable. This paper presents the first achievements of the project, involving the development of a framework that can be employed to identify situations when continuity is disadvantageous and for which segmentation is beneficial., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude for funding received under the postdoctoral Grant IJC2020¿042642- I funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the ¿European Union NextGenerationEU/PRTR¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Progressive collapse: Past, present, future and beyond

  • Elkady, Nada
  • Augusthus Nelson, Levingshan
  • Weekes, Laurence
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
[EN] The world has seen a surge in rigorous study efforts on the progressive collapse of structures in the past few decades. These events have led to new standards and provisions in building codes of practice, many of which are still being developed and updated today. Although there have been some excellent reviews covering different aspects of progressive collapse, the sheer volume of research performed in this area in recent years means that highly relevant investigation methods and research findings are not covered by them. To fill this void, this review article aims to provide an up-to-date and comprehensive overview of progressive collapse research on building structures. The review is organised into eight sections that cover: (1) essential background information; (2) prominent collapse cases; (3) progressive collapse typology; (4) design standards; (5) investigation methods; (6) prevention and mitigation strategies; (7) structural types and characteristics that require special consideration; and (8) future research needs. In addition to the fundamental concepts, this review encompasses recent advances, such as employing physics and game engines, and machine learning to study progressive collapse. It also explores the potential future applications of these new concepts in research. Furthermore, the review emphasises recent progress in improving the robustness of timber and modular structures. Therefore, this review provides a crucial resource to acquire a global overview of current state-of-the-art progressive collapse research and future requirements, making it valuable to both novice and experienced practitioners and researchers., Part of the review has been funded by the Enroot project, which has received funding from Generalitat Valenciana - Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, Spain under the GE 2023 call (CIGE/2022/120) .