Pasar al contenido principal

Minimizing marine pollution by application of advanced water treatments

IJC2020-042741-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the relevant role of iron complexation for the performance of photo-Fenton process at mild pH: Role of ring substitution in phenolic ligand and interaction with halides

  • Vallés-Ferrer, Ivan|||0000-0002-6510-3970
  • Mora Carbonell, Margarita|||0000-0002-6060-0775
  • Micó Tormos, Pau|||0000-0002-8089-8329
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Sciscenko, Iván Matías
  • Moreno-Andrés, Javier
[EN] In this work, a systematic study on the effect of Fe(III) complexation by phenolic derivatives with different substitution on photo-Fenton has been carried out. Solutions containing a mixture of six pollutants (30 mg.L-1) were treated by solar simulated photo-Fenton ([Fe(II)] = 0.09 mmol.L-1, [H2O2] = 4.29 mmol.L-1, pH = 5, [Ligand] = 0.227 mmol.L-1. The efficiency of ligand increased with the presence of-OH groups (mainly in ortho-position), while the reverse was true for-COOH and-OCH3. This was correlated with the ability of the ligands to reduce Fe(III) to Fe(II). Catechol (CAT) supressed the interference of chlorides at [NaCl] = 30 mg/L-1 by complexing iron(III) thus preventing formation of FeCl2+, as 85% of Fe(III) was found as Fe(CAT)(3) according to mathematical calculations. Hence, effluent matrix, including anions and organic pollutants, has a remarkable effect on iron speciation and a it should be considered when determining reaction conditions., Authors want to acknoledge the financial support of Spanish Ministerio de Ciencia e Innovacion (PID2021-126400OB-C31, AquaEnAgri Project) . and TED2021-130994B-C31 and TED2021-130994B-C32 (Ecotranseas) . J. Moreno-Andres acknowledges Grant IJC2020- 042741-I funded my MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. I. Sciscenko wants to acknowledge Generalitat Valenciana (CUBackspaceIAPOS/2021/311. I. Valles ackonowledges Ministerio de Universidades (FPU21/01336).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Inactivation of the waterborne marine pathogen Vibrio alginolyticus by photo-chemical processes driven by UV-A, UV-B, or UV-C LED combined with H2O2 or HSO5.

  • Moreno Andrés, Javier
  • Tierno-Galán, Miguel
  • Romero Martínez, Leonardo
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
Ultraviolet (UV) radiation is a well-implemented process for water disinfection. The development of emergent UV sources, such as light-emitting diodes (LEDs), has afforded new possibilities for advanced oxidation processes. The emission wavelength is considered to be an important factor for photo-chemical processes in terms of both biological damage and energetic efficiency, as the inactivation mechanisms and mode-of-action may differ according to the wavelength that is applied. In addition, these processes merit exploration for inactivating emerging pathogens, such as marine vibrios, that are important bacteria to control in maritime activities. The main goal of this study was to compare the disinfection efficacy of several UV-LED driven processes with different modes of action. First, the effect of UV-LEDs was assessed at different UV ranges (UV-A, UV-B, or UV-C). Second, the possible enhancement of a combination with hydrogen peroxide (H2O2) or peroxymonosulfate salt (HSO5-) was investigated under two different application strategies, i.e. simultaneous or sequential. The results obtained indicate a high sensitivity of Vibrio alginolyticus to UV radiation, especially under UV-B (kobs=0.24cm2/mJ) and UV-C (kobs=1.47cm2/mJ) irradiation. The highest inactivation rate constants were obtained for UV/HSO5- (kobs (cm2/mJ)=0.0007 (UV-A); 0.39 (UV-B); 1.79 (UV-C)) with respect to UV/H2O2 (kobs (cm2/mJ)=0.0006 (UV-A); 0.26 (UV-B); and 1.54 (UV-C)) processes, however, regrowth was avoided only with UV/H2O2. Additionally, the disinfection enhancement caused by a chemical addition was more evident in the order UV-A>UV-B>UV-C. By applying H2O2 (10mg/L) or HSO5- (2.5mg/L) in a sequential mode before the UV, negligible effects were obtained in comparison with the simultaneous application. Finally, promising electrical energy per order (EEO) values were obtained as follows: UV/HSO5- (EEO (kWh/m3)=1.68 (UV-A); 0.20 (UV-B); 0.04 (UV-C)) and UV/H2O2 (EEO (kWh/m3)=2.15 (UV-A); 0.32 (UV-B); 0.04 (UV-C)), demonstrating the potential of UV-LEDs for disinfection in particular activities such as the aquaculture industry or maritime transport.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

UV-LEDs combined with persulfate salts as a method to inactivate microalgae in ballast water

  • Rivas Zaballos, Ignacio
  • Romero Martínez, Leonardo
  • Moreno Garrido, Ignacio
  • Moreno Andrés, Javier
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
The Ballast Water Management Convention (BWMC) establishes limits for viable organisms in discharged ballast water. UV-based ballast water management systems (BMWS) are among the most common, especially those with low pressure (LP) and medium pressure (MP) mercury lamps. An interesting alternative to mercury lamps could be UV LEDs that have been developing over recent years. UVA, UVB, and UVC LEDs have been tested as a method to inactivate microalgae in ballast water. For this study, the diatom Phaeodactylum tricornutum was selected as a target organism. Comparing the D2 (dose required to achieve two log reductions) for P. tricornutum from different UV treatments, it was observed that UVC LEDs were 74.2 % more efficient than UVB LEDs and, compared with previous studies, 48.1 % more efficient than UVC LP mercury lamps. If a five day dark post-treatment was combined with the UV irradiation to avoid photoreactivation, UVC LEDs were 90 % more efficient than UVB LEDs and, compared with previous studies, 36.8 % more efficient than UVC LP mercury lamps. No damage with or without photoreactivation was caused by UVA irradiation with doses up to 4·104 mJ cm−2. The combination of peroxymonosulfate (PMS) with UVA, UVB and UVC LEDs did not significantly increase the inactivation, and the combination of the peroxydisulfate (PDS) with UVC LEDs slightly decreases the inactivation compared with UVC irradiation alone. In conclusion, UVC LEDs were the most efficient for inactivating P. tricornutum, and the combination of PMS and PDS with UV LEDs did not notably improve it. © 2022 The Authors
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Inactivation efficacy and reactivation of fecal bacteria with a flow-through LED ultraviolet reactor: Intraspecific response prevails over interspecific differences

  • Romero Martínez, Leonardo
  • Duque-Sarago, Paola
  • González-Martín, Claudia
  • Moreno Andrés, Javier
  • Acevedo Merino, Asunción
  • Nebot Sanz, Enrique
Treatment with ultraviolet (UV) light is a common option for inactivating waterborne organisms. The mercury vapor lamps conventionally used as a source of UV-C light for water disinfection are eventually replaced by light emitter diodes (LEDs) in the middle term due to their higher efficiency and lack of hazardous materials. Nonetheless, biological mechanisms for repairing UV damage caused by the UV treatment are some of its significant undesirable features. The objective of this study is to evaluate and compare the UV-resistance and the reactivation degree in different strains of E. coli and E. faecalis treated with a flow-through reactor equipped with LEDs with an emission range between 265 and 285 nm. The treated organisms were subjected to various illumination regimes after the UV irradiation. The results obtained indicated that intraspecific differences between the strains of E. coli were greater than the interspecific differences with respect to E. faecalis in terms of UV-resistance and repairing potential. The UV doses necessary to achieve four log-reductions ranged from 10.2 to 16.3 mJ cm−2 for E. coli and from 11.1 to 11.4 for mJ cm−2 for E. faecalis. Dark repair was not observed within 24 h after the UV irradiation whereas the degree of photorepair depended on both the bacteria strain and the applied UV dose. The exposure of the irradiated organisms to an illuminated environment entailed and increasing between the 18 % and the 160 % of the UV dose required to achieve four log-reductions. © 2023 The Author(s)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Inactivation of E. coli and S. aureus by novel binary clay/semiconductor photocatalytic macrocomposites under UVA and sunlight irradiation

  • Aguilar, S.
  • Guerrero, B.
  • Benítez, A.
  • Ramos, D.R.
  • Santaballa, J.A.
  • Canle, M.
  • Rosado, D.
  • Moreno Andrés, Javier
The disinfection efficiency of several novel photocatalytic macrocomposites made of Ecuadorian clay mixed with two semiconductor materials (TiO2, ZnO) has been evaluated with Staphylococcus aureus and Escherichia coli as target bacteria. They have been tested under two irradiation sources (UVA lamp and sunlight) in different configurations. Two different semiconductor/clay ratios (60/40 and 80/20) were tested at 10–20 g·L–1 (with UVA) and 20–40 g·L–1 (with sunlight) composite loadings. With the presence of the photocatalyst, a four- to five-fold increase in the inactivation rate by UVA was observed with respect to single UVA inactivation, while the performance with sunlight reaches up to six-fold. The particular effect of nature, ratio and loading on the inactivation kinetics depends on the specific bacterial species tested. In this case, the inactivation of S. aureus was faster in comparison with E. coli, probably due to the interaction between bacteria and the catalytic material and the associated ζ-potential. In general, the 80% ZnO composites at maximum loading show the highest efficiency, comparable to that of nanosized semiconductors. The ability of these composites to maintain a high disinfection efficiency after three uses, together with their low cost and ease of recovery, make these composites an attractive option for wider use in water disinfection facilities.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Otros (Other)

Advanced treatment for non-conventional aqueous matrices: editorial

  • Moreno Andrés, Javier
  • Rodríguez-Chueca, Jorge
  • Giannakis, S.
  • Mantzavinos, D.
In recent years, there has been a surge of interest in the development of advanced treatments aimed at controlling, treating, or remediating various aqueous matrices. These novel solutions hold tremendous potential, but their successful implementation across different cases and varieties of effluents is still a significant challenge. While their focus has traditionally been on treating conventional matrices like municipal wastewater or drinking water, our attention must also be directed toward non-conventional effluents/water sources. These matrices, including industrial waters, highly saline/brackish waters, and produced water, demand proper treatment to remediate their contamination or enhance their quality at the source of generation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

On the relevant role of iron complexation for the performance of photo-Fenton process at mild pH: Role of ring substitution in phenolic ligand and interaction with halides

  • Vallés, Ivan
  • Sciscenko, Iván
  • Mora, Margarita
  • Micó, Pau
  • Amat, Ana M.
  • Santos Juanes, Lucas
  • Moreno Andrés, Javier
  • Arques, Antonio
In this work, a systematic study on the effect of Fe(III) complexation by phenolic derivatives with different substitution on photo-Fenton has been carried out. Solutions containing a mixture of six pollutants (30 mg·L−1) were treated by solar simulated photo-Fenton ([Fe(II)] = 0.09 mmol·L−1, [H2O2] = 4.29 mmol·L−1, pH = 5, [Ligand] = 0.227 mmol·L−1. The efficiency of ligand increased with the presence of -OH groups (mainly in ortho- position), while the reverse was true for -COOH and -OCH3. This was correlated with the ability of the ligands to reduce Fe(III) to Fe(II). Catechol (CAT) supressed the interference of chlorides at [NaCl] = 30 mg/L−1 by complexing iron(III) thus preventing formation of FeCl2+, as 85% of Fe(III) was found as Fe(CAT)3 according to mathematical calculations. Hence, effluent matrix, including anions and organic pollutants, has a remarkable effect on iron speciation and a it should be considered when determining reaction conditions., 10 páginas
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Inactivation of E. Coli and S. Aureus by Novel Binary Clay/Semiconductor Photocatalytic Macrocomposites Under UVA and Sunlight Irradiation

  • Aguilar, Silvio D.
  • Guerrero Sánchez, Briggitte Alexandra
  • Benítez, Ángel
  • Ramos, Daniel R.
  • Santaballa, J. Arturo
  • Canle, Moisés
  • Rosado, Daniel
  • Moreno-Andrés, Javier
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The disinfection efficiency of several novel photocatalytic macrocomposites made of Ecuadorian clay mixed with two semiconductor materials (TiO2, ZnO) has been evaluated with Staphylococcus aureus and Escherichia coli as target bacteria. They have been tested under two irradiation sources (UVA lamp and sunlight) in different configurations. Two different semiconductor/clay ratios (60/40 and 80/20) were tested at 10–20 g·L–1 (with UVA) and 20–40 g·L–1 (with sunlight) composite loadings. With the presence of the photocatalyst, a four- to five-fold increase in the inactivation rate by UVA was observed with respect to single UVA inactivation, while the performance with sunlight reaches up to six-fold. The particular effect of nature, ratio and loading on the inactivation kinetics depends on the specific bacterial species tested. In this case, the inactivation of S. aureus was faster in comparison with E. coli, probably due to the interaction between bacteria and the catalytic material and the associated ζ-potential. In general, the 80% ZnO composites at maximum loading show the highest efficiency, comparable to that of nanosized semiconductors. The ability of these composites to maintain a high disinfection efficiency after three uses, together with their low cost and ease of recovery, make these composites an attractive option for wider use in water disinfection facilities., This research has received support from the Spanish Ministerio de Ciencia e Innovación, through grant TED2021–132667B-I00, funded by the EU NextGeneration EU/PRTR through project MCIN/AEI/10.13039/501100011033. Financial support was provided also by the regional government of the Xunta de Galicia through project GPC/ED431B 2020/52. S.A. acknowledges the Universidad Técnica Particular de Loja for financial support to carry out PhD studies at the Universidade da Coruña, D.R.R thanks the Universidade da Coruña for a Margarita Salas contract and J.M.A. acknowledges a grant IJC2020–042741-I funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; GPC/ED431B 2020/52
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of algaecide effectiveness of five different oxidants applied on harmful phytoplankton

  • Moreno-Andrés, Javier
  • Romero-Martínez, Leonardo
  • Seoane, Sergio
  • Acevedo-Merino, Asunción
  • Moreno-Garrido, Ignacio
  • Nebot, Enrique
Harmful algal blooms (HABs) in coastal areas similarly impact both ecosystems and human health. The translocation of phytoplankton species via maritime transport can potentially promote the growth of HABs in coastal systems. Accordingly, ballast water must be disinfected. The main goal of this study is to assess the effectiveness of different emerging biocides, including H2O2, peracetic acid (PAA), peroxymonosulfate (PMS), and peroxydisulfate (PDS). The effectiveness of these biocides is compared with that of conventional chlorination methods. Their effects on two ichthyotoxic microalgae with worldwide distribution, i.e., Prymnesium parvum and Heterosigma akashiwo, are examined. To ensure the prolonged effectiveness of the different reagents, their concentration-response curves for 14 days are constructed and examined. The results suggest a strong but shorter effect by PMS (EC50 = 0.40-1.99 mg·L-1) and PAA (EC50 = 0.32-2.70 mg·L-1), a maintained effect by H2O2 (EC50 = 6.67-7.08 mg·L-1), and a negligible effect by PDS. H. akashiwo indicates higher resistance than P. parvum, except when H2O2 is used. Based on the growth inhibition performance and consumption of the reagents as well as a review of important aspects regarding their application, using H2O2, PAA, or PMS can be a feasible alternative to chlorine-based reagents for inhibiting the growth of harmful phytoplankton., This work has been co-funded by the 2014–2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia (Spain). Project Ref.: FEDER-UCA18–108023. This work is part of the project TED2021–130994B-C31; TED2021–130994B-C33 and Grant IJC2020–042741-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

UV-LEDs combined with persulfate salts as a method to inactivate microalgae in ballast water

  • Rivas-Zaballos, Ignacio
  • Romero-Martínez, Leonardo
  • Moreno-Garrido, Ignacio
  • Moreno-Andrés, Javier
  • Acevedo-Merino, Asunción
  • Nebot, Enrique
The Ballast Water Management Convention (BWMC) establishes limits for viable organisms in discharged ballast water. UV-based ballast water management systems (BMWS) are among the most common, especially those with low pressure (LP) and medium pressure (MP) mercury lamps. An interesting alternative to mercury lamps could be UV LEDs that have been developing over recent years. UVA, UVB, and UVC LEDs have been tested as a method to inactivate microalgae in ballast water. For this study, the diatom Phaeodactylum tricornutum was selected as a target organism. Comparing the D2 (dose required to achieve two log reductions) for P. tricornutum from different UV treatments, it was observed that UVC LEDs were 74.2 % more efficient than UVB LEDs and, compared with previous studies, 48.1 % more efficient than UVC LP mercury lamps. If a five day dark post-treatment was combined with the UV irradiation to avoid photoreactivation, UVC LEDs were 90 % more efficient than UVB LEDs and, compared with previous studies, 36.8 % more efficient than UVC LP mercury lamps. No damage with or without photoreactivation was caused by UVA irradiation with doses up to 4·104 mJ cm−2. The combination of peroxymonosulfate (PMS) with UVA, UVB and UVC LEDs did not significantly increase the inactivation, and the combination of the peroxydisulfate (PDS) with UVC LEDs slightly decreases the inactivation compared with UVC irradiation alone. In conclusion, UVC LEDs were the most efficient for inactivating P. tricornutum, and the combination of PMS and PDS with UV LEDs did not notably improve it., This research was funded by the European Union under the 2014–2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia. Project reference: FEDER-UCA18–108023. J. Moreno-Andrés acknowledges Grant IJC2020–042741-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR., Peer reviewed