Pasar al contenido principal

Strategies to Combat Antimicrobial Resistance

IJCI-2016-29524

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION PÚBLICA GALEGA DE INVESTIGACIÓN BIOMÉDICA INIBIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Development of Antibacterial Steel Surfaces Through Laser Texturing

  • Villapún, Victor M.
  • Pérez Gómez, Astrid
  • Wei, W.
  • Dover, L. G.
  • Thompson, Jonathan R.
  • Barthels, T.
  • Rodríguez, Jaime
  • Cox, S.
  • González, S.
[Abstract] The aim of the present study was to develop novel antibacterial touch surfaces through the laser texturing optimization of stainless steel. A wide range of laser fluence (2.11 J/cm2–5.64 J/cm2) and scanning interval (10 µm–30 μm) parameters were explored. The impact of surfaces with different patterns, wettability, and oxidation states on the antimicrobial behavior of Escherichia coli K-12 and biofilm hyper-producing Acinetobacter baumannii MAR002 was assessed. Modification of laser input enacted topographical changes with high scanning intervals leading to ordered surface patterns, while increasing the laser fluence to 5.64 J/cm2 created larger and less ordered plateaus and valleys. Texturing also drove a transition from a hydrophilic starting surface with a contact angle of 80.67° ± 3.35° to hydrophobic (138°–148°). Antimicrobial analysis and bioluminescence assays of E. coli, alongside biofilm forming test through A. baumannii MAR002 indicated the ability of laser texturing to produce effective bactericidal touch surfaces. No simple correlation was found between wettability and bacterial behavior, revealing that proliferation is dependent on roughness, oxidation, and wettability. For the conditions selected in this study, a laser fluence of 5.64 J/cm2 and a scanning interval of 10 µm showcased the lowest amount of recovered bacteria after 30 min., This research was supported by Project Nos. 592 p-01216A and IJCI-2016-29524 (awarded to A.P.G.), funded by the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) and MINECO, respectively. This manuscript is part of Process Design to Prevent Prosthetic Infections (Grant No. EP/P02341X/1), Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica; 592 p-01216A, Reino Unido. Engineering and Physical Sciences Research Council; EP/P02341X/1
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Diagnostic tool for surveillance, detection and monitoring of the high-risk clone K. pneumoniae ST15

  • Gato, Eva
  • Rodiño-Janeiro, Bruno Kotska
  • Gude, María José
  • Fernández-Cuenca, Felipe
  • Pascual, Álvaro
  • Viña Fernández, Anabel María
  • Pérez Gómez, Astrid
  • Bou, Germán
[Abstract] Background: The global spread of Klebsiella pneumoniae ST15, causing multi-continental outbreaks, contributes to the movement of resistance genes between clones increasing the antimicrobial resistance crisis. The genomic traits providing it with the ability to outcompete other bacteria and cause epidemics remain unclear. Aim: To identify the specific genomic traits of K. pneumoniae ST15 to develop a diagnostic test. Methods: An outbreak caused by K. pneumoniae occurred in Hospital A Coruña, Spain. Antimicrobial susceptibility analysis and molecular typing (PGFE and MLST) were performed. One isolate of each sequence type was selected for whole-genome sequencing analysis. Comparative analysis of genomes was performed using RAST. BLASTn was used to evaluate the presence of the fhaC and kpiD genes. Two hundred and ninety-four K. pneumoniae from a Spanish nationwide collection were analysed by PCR. Findings: Genotyping showed that 87.5% of the isolates tested belonged to a clone with a unique PFGE pattern which corresponded to ST15. Comparative genomic analysis of the different STs enabled us to determine the specific genomic traits of K. pneumoniae ST15. Two adherence-related systems (Kpi and KpFhaB/FhaC) were specific markers of this clone. Multiplex-PCR analysis with kpiD and fhaC oligonucleotides revealed that K. pneumoniae ST15 is specifically detected with a sensitivity of 100% and a specificity of 97.76%. The PCR results showed 100% concordance with the MLST and whole-genome sequencing data. Conclusion: K. pneumoniae ST15 possesses specific genomic traits that could favour its dissemination. They could be used as targets to detect K. pneumoniae ST15 with high sensitivity and specificity., This work was supported by projects PI18/00501 (awarded to G.B.), p-01216A and IJCI-2016-29524 (awarded to A.P.), funded by the Instituto de Salud Carlos III, Spanish Society of Infectious Diseases and Clinical Microbiology and Spanish Ministry of Economy, Industry and Competitiveness (MEIC). A.P. and E.G. are supported by the Miguel Servet (CP22CIII-00007) and Sara Borrel programs, respectively, of the Instituto de Salud Carlos III, Spain., Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica; p-01216A
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Kpi, a Chaperone-Usher Pili System Associated with the Worldwide-Disseminated High-Risk Clone Klebsiella Pneumoniae ST-15

  • Gato, Eva
  • Vázquez-Ucha, Juan Carlos
  • Rumbo-Feal, Soraya
  • Álvarez-Fraga, Laura
  • Vallejo, J. A.
  • Martínez Guitián, Marta
  • Beceiro Casas, Alejandro
  • Ramos Vivas, Jose
  • Sola-Campoy, Pedro Juan
  • Pérez-Vázquez, María
  • Oteo, Jesús
  • Rodiño-Janeiro, Bruno Kotska
  • Romero, A.
  • Poza, Margarita
  • Bou, Germán
  • Pérez Gómez, Astrid
[Abstract] Control of infections caused by carbapenem-resistant Klebsiella pneumoniae continues to be challenging. The success of this pathogen is favored by its ability to acquire antimicrobial resistance and to spread and persist in both the environment and in humans. The emergence of clinically important clones, such as sequence types 11, 15, 101, and 258, has been reported worldwide. However, the mechanisms promoting the dissemination of such high-risk clones are unknown. Unraveling the factors that play a role in the pathobiology and epidemicity of K. pneumoniae is therefore important for managing infections. To address this issue, we studied a carbapenem-resistant ST-15 K. pneumoniae isolate (Kp3380) that displayed a remarkable adherent phenotype with abundant pilus-like structures. Genome sequencing enabled us to identify a chaperone-usher pili system (Kpi) in Kp3380. Analysis of a large K. pneumoniae population from 32 European countries showed that the Kpi system is associated with the ST-15 clone. Phylogenetic analysis of the operon revealed that Kpi belongs to the little-characterized γ2-fimbrial clade. We demonstrate that Kpi contributes positively to the ability of K. pneumoniae to form biofilms and adhere to different host tissues. Moreover, the in vivo intestinal colonizing capacity of the Kpi-defective mutant was significantly reduced, as was its ability to infect Galleria mellonella. The findings provide information about the pathobiology and epidemicity of Kpi+ K. pneumoniae and indicate that the presence of Kpi may explain the success of the ST-15 clone. Disrupting bacterial adherence to the intestinal surface could potentially target gastrointestinal colonization., This research was supported by Projects p-01216A and IJCI-2016-29524 (to A.P.), funded by the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC) and the Minestry of Economy and Competetiveness (MINECO), respectively. It was also supported by Projects PI11/01034 (to M.P.), PI14/00059 and PI17/1482 (to M.P. and A.B.), and PI18/00501 (to G.B.), included in the National Plan for Scientific Research, Development and Technological Innovation 2013-2016 and funded by the Instituto de Salud Carlos III (ISCIII) and Subdirección General de Redes y Centros de Investigación Cooperativa, Ministerio de Economía, Industria y Competitividad, Spanish Network for Research in Infectious Diseases (REIPI RD16/0016/006) cofinanced by European Development Regional Fund “A way to achieve Europe” and operative program Intelligent Growth 2014-2020. Grant BFU2016-77835-R of the MINECO (to A.R.) also supported this research. E.G. was financially supported by the SEIMC project. J.C.V.-U. was financially supported by the PFIS (Contratos Predoctorales de Formación en Investigación en Salud) program (F18/00315); J.A.V. was financially supported by IN607A 2016/22; M.M.-G. was financially supported by a Clara Roy grant (SEIMC); A.B. was financially supported by the Miguel Servet program (ISCIII, Spain); B.K.R.-J. was financially supported by Marie S. Curie Action SaPhaDe project (MSCA-IF-GF-836754); and A.P. was financially supported by the Juan de la Cierva program (MINECO, IJCI-2016-29524), Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica; p-01216A, Xunta de Galicia; IN607A 2016/22