Pasar al contenido principal

Graphenes and doped composites as catalysts for water electrolyzers and metal-air batteries

IJCI-2017-32354

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomass waste-derived nitrogen and iron co-doped nanoporous carbons as electrocatalysts for the oxygen reduction reaction

  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Alegre Gresa, Cinthia
  • Tsoncheva, T.
  • Petrov, N.
  • Paneva, D.
  • Lázaro Elorri, María Jesús
11 figures, 4 tables.-- Información suplementaria., Biomass from agricultural by-products is gaining increasing interest as cheap and abundant precursor in the development of active materials for efficient and environmentally friendly devices like fuel cells. Herein, we investigated iron and nitrogen co-doped nanoporous carbons derived from aronia, peach stones and coal tar pitch/furfural as electrocatalysts for the electrochemical oxygen reduction reaction (ORR) in alkaline media. Urea was used as nitrogen precursor and two annealing steps with intermediate acid leaching served to activate the catalysts. Within the series, the peach stone-derived catalyst exhibited a catalytic activity for the ORR close to the benchmark Pt/C, with a 60 mV dec−1 Tafel slope upon the incorporation of 0.57 wt% Fe and proper combination of N-Fe species (20%) with pyridinic/pyridonic moieties (49%). We concluded that the microporosity and a certain content of meso/macro-pores of the activated carbon, together with the creation of graphitic domains result in a high relative amount of Fe-N4 and nitrogen functionalities, which determine the electrocatalytic performance., The authors gratefully acknowledge financial support given by the project BLOW UP "Balkans Waste to Products: transfer of NoI model to Balkan area: de-siloing new waste-derived raw materials and developing new applications" from EIT RAW MATERIAL EIT16320, Horizon 2020. D. Sebastián and C. Alegre acknowledge the Ministry of Economy, Industry and Competitiveness for their Ramón y Cajal (RyC-2016-20944) and Juan de la Cierva Incorporación (IJCI-2017-32354) research contracts, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrocatalizadores bifuncionales basados en nanofilamentos de óxido de manganeso para las reacciones de reducción y evolución de oxígeno

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Martínez Visus, Íñigo
  • Lázaro Elorri, María Jesús
2 figuras.-- Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Las baterías acuosas metal-aire son una tecnología prometedora tanto para electromovilidad como para almacenamiento de energía estacionario, debido a su bajo coste, su elevada energía específica y la capacidad de usar materiales abundantes y seguros. En el electrodo positivo de estos sistemas ocurre, durante la descarga, la reducción del oxígeno ambiental (ORR) y, durante la carga, la reacción de evolución de oxígeno (OER), reacciones ambas de cinética lenta que requieren del uso de electrocatalizadores. En este trabajo, se han sintetizado nanofilamentos de dióxido de manganeso (MONW), conocidos por su reversibilidad y durabilidad como catalizadores para las reacciones de reducción (ORR) y evolución de oxígeno (OER). Además, dichos nanofilamentos se han modificado con nanopartículas de hierro (Fe-MONW), de elevada actividad para la OER y/o níquel (Ni-MONW), activo para la ORR., Los autores agradecen la financiación del Gobierno de Aragón al grupo de investigación T06_17R. C. Alegre también agradece al Ministerio de Economía, Industria y Competitividad su contrato Juan de la Cierva (IJCI-2017-32354) y N. Villanueva agradece al Gobierno de Aragón su contrato pre-doctoral DGA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Efecto del dopado con nitrógeno de xerogeles de carbono en la actividad de catalizadores Fe-N-C para pilas de combustible

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 figura.-- Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Actualmente, uno de los mayores retos en la tecnología de pilas de combustible de electrolito polimérico (PEFCs) es la disminución del coste de los sistemas catalíticos empleados en el ánodo y en el cátodo. Una de las estrategias más exploradas es la de sustituir los catalizadores basados en Pt por otros basados en metales de transición coordinados con nitrógeno y carbono (Me-N-C, donde Me = Fe, Co y/o Mn), siendo los catalizadores Fe-N-C los más activos para la reacción de reducción de oxígeno (ORR), la reacción limitante en las pilas de combustible. Generalmente, estos catalizadores emplean negros de carbono microporosos como matrices carbonosas. En este trabajo se han sintetizado diferentes catalizadores de hierro usando como estructura carbonosa los xerogeles de carbono, previamente dopados con nitrógeno (N-CXG), con el fin de usar una matriz carbonosa con una mezcla adecuada de microporos y meso/macroporos, necesarios para una correcta difusión de especies en la pila de combustible., Los autores agradecen la financiación del Ministerio de Economía, Industria y Competitividad al proyecto ENE2017-83976-C2-1-R. C. Alegre y D. Sebastián también agradecen al Ministerio de Economía, Industria y Competitividad sus contratos Juan de la Cierva (IJCI-2017-32354) y Ramón y Cajal (RyC-2016-20944), respectivamente y L. Álvarez agradece al Gobierno de Aragón su contrato pre-doctoral DGA. Los autores quieren agradecer también la financiación de la red REPICOMES, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Iron Electrodes Based on Sulfur-Modified Iron Oxides with Enhanced Stability for Iron–Air Batteries

  • Villanueva, Nicolás
  • Alegre, Cinthia
  • Rubin, Javier
  • Figueredo-Rodríguez, Horacio A.
  • McKerracher, Rachel D.
  • de León, Carlos Ponce
  • Lázaro, María Jesús
Iron–air systems are a very promising technology with the potential to become one of the cheapest and safest energy storage solutions of the future. However, iron anodes still face some challenges like passivation, resulting in loss of capacity, due to the formation of nonconductive species during cycling as well as the hydrogen evolution reaction, a parasitic reaction interfering with the charging of the electrode. In the present work these two issues are addressed: Sulfur-modified mesoporous iron oxides are obtained and used as hot-pressed negative electrodes for alkaline iron–air batteries. Iron electrodes present average capacity values between 400 and 500 mA h g Fe–1 for ∼100 h of operation, the S-modified iron oxides being the most stable ones. An exponential deactivation model fitting the discharge capacity of the different electrodes compared to the number of cycles was proposed. According to the model, the best of the electrodes loses less than 0.5% of its capacity per cycle. Furthermore, doubling the charge and discharge rates allows increasing both the discharge capacity and the Coulumbic efficiency, though at the expense of stability. This manuscript proves that the proper distribution of sulfur on the surface of the iron oxide is fundamental to suppress the HER and passivation, enhancing the stability of the electrode. These properties were further corroborated in long test-runs which comprised more than 400 h of charging and discharging.