Pasar al contenido principal

DESARROLLO DE UNA NUEVA GENERACIÓN DE LENTES INTRAOCULARES MULTIFUNCIONALES(HORUS)

IPT-2012-0574-300000

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Cooperación Público-Privada
Subprograma Subprograma INNPACTO
Convocatoria INNPACTO
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario AJL OPHTHALMIC, S.A.
Identificador persistente http://dx.doi.org/10.13039/501100003329

DESARROLLO DE UNA NUEVA GENERACIÓN DE LENTES INTRAOCULARES MULTIFUNCIONALES(HORUS)

IPT-2012-0574-300000

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Cooperación Público-Privada
Subprograma Subprograma INNPACTO
Convocatoria INNPACTO
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario FUNDACION OFTALMOLOGICA DEL MEDITERRANEO
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of surface properties in protein corona development on mesoporous silica nanoparticles

  • CLEMMENTS, ALDEN MICHAEL
  • Muniesa Lajara, Carlos
  • Landry, Christopher Caron
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] The composition of the protein corona formed on mesoporous silica nanoparticles with several surface modifications was characterized. Low MW serum proteins were preferentially adsorbed, and PEGylated nanoparticles did not adsorb protein regardless of PEG chain length., The authors are thankful for financial support by the Spanish Ministry of Economy and Competiveness (projects SEV-2012-0267, MAT2012-39290-C02-02 and IPT-2012-0574-300000) and by the University of Vermont.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Degradation of Methylene Blue Using Porous WO3, SiO2-WO3, and Their Au-Loaded Analogs: Adsorption and Photocatalytic Studies.

  • DePuccio, Daniel P
  • O'Rourke, Bruke
  • Landry, Christopher C.
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] A facile sonochemical approach was used to deposit 3-5 nm monodisperse gold nanoparticles on porous SiO2-WO3 composite spheres, as confirmed by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). High-resolution TEM (HR-TEM) and energy dispersive X-ray spectroscopy (EDS) further characterized the supported Au nanoparticles within the Au-SiO2-WO3 composite. These analyses showed isolated Au nanoparticles within both SiO2- and WO3-containing regions. Selective etching of the SiO2 matrix from Au-SiO2-WO3 yielded a pure Au-WO3 material with well-dispersed 10 nm Au nanoparticles and moderate porosity. This combined sonochemical-nanocasting technique has not been previously used to synthesize Au-WO3 photocatalysts. Methylene blue (MB) served as a probe for the adsorption capacity and visible light photocatalytic activity of these WO3-containing catalysts. Extensive MB demethylation (azures A, B, C, and thionine) and polymerization of these products occurred over WO3 under dark conditions, as confirmed by electrospray ionization mass spectrometry (ESI-MS). Photoirradiation of these suspensions led to further degradation primarily through demethylation and polymerization pathways, regardless of the presence of Au nanoparticles. Ring-opening sulfur oxidation to the sulfone was a secondary photocatalytic pathway. According to UV-vis spectroscopy, pure WO3 materials showed superior MB adsorption compared to SiO2-WO3 composites. Compared to their respective nonloaded catalysts, Au-SiO2-WO3 and Au-WO3 catalysts exhibited enhanced visible light photocatalytic activity toward the degradation of MB. Specifically, the rates of MB degradation over Au-WO3 and Au-SiO2-WO3 during 300 min of irradiation were faster than those over their nonloaded counterparts (WO3 and SiO2-WO3). These studies highlight the ability of Au-WO3 to serve as an excellent adsorbant and photodegradation catalyst toward MB., The authors thank the University of Vermont and Spanish MINECO (projects MAT2012-39290-C02-02 and IPT-2012-0574-300000) for financial support, Michele Von Turkovich and Alden M. Clemments for assistance in obtaining TEM images, and David M. Parker for assistance with catalyst synthesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protein adsorption from biofluids on silica nanoparticles: corona analysis as a function of particle diameter and porosity

  • Clemments, Alden M.
  • Landry, Christopher C.
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] A study on the adsorption of proteins from fetal bovine serum (FBS) on spherical dense and mesoporous silica nanoparticles with a wide range of diameters, from 70 to 900 nm, is presented. Monodisperse populations of particles with a range of diameters were obtained through modifications of the Striber method. Extensive characterization of the particles was then performed using N2 physisorption, TEM, DLS, and (potential. Following serum exposure, proteomic evaluation in concert with thermogravimetric analysis revealed the associated concentrations of each protein identified in the hard corona. Small particles adsorbed the largest amount of protein, due to their larger external surface area. Proteins with low molecular weights (<50 IdDa) constituted the majority of the protein corona, totaling between 60 and 80% of the total mass of adsorbed protein. Here, the higher surface curvature of small particles favors the enrichment of smaller proteins. Porosity does not promote protein adsorption but improves deposition of the low molecular weight protein fraction due to the size-exclusion effect related to pore diameter. These results have important implications for the use of dense and porous silica nanopartides in biomedical applications., The authors are thankful for financial support by the Spanish Ministry of Economy and Competiveness (projects SEV-2012-0267, MAT2012-39290-C02-02 and IPT-2012-0574-300000) and the University of Vermont. Research reported in this was supported by an Institutional Development Award (IDeA) from the National Institute of General Medical Sciences of the National Institutes of Health under grant number P20GM103449. Its contents are solely the responsibility of the authors and do not necessarily represent the official views of NIGMS or NIH.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Intra-ocular lens optical changes resulting from the loading of dexamethasone

  • Artigas, Jose M.
  • Garcia-Domene, M. Carmen
  • Navea, Amparo
  • Fernandez, Eduardo
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] To study the optical changes on hydrogel-silicone intraocular lenses (IOLs) resulting from loading them with dexamethasone. We used prototype hydrogel(pHEMA)silicone IOLs and loaded the matrices with an anti-inflammatory drug (dexamethasone). The optical properties we analyzed experimentally were a) modulation transfer function (MTF); b) spectral transmission; c) diopter power. These determinations were performed on drug-loaded IOLs, IOLs that had released the drug, and IOLs that had not been drug-loaded. Loading a hydrogel-silicone IOL with dexamethasone results in impairment of its optical qualities, in particular its MTF and spectral transmission, but not dioptric power. However, once the drug has been released, it almost recovers its initial optical properties., Project IPT-2012-0574-300000 (Spain) and AJL Ophthalmic S.A. (Vitoria, Spain).