Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced H2 Separation through Mixed Proton Electron Conducting Membranes Based on La5.5W0.8M0.2O11.25 d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Seeger, J.
  • Roitsch, S.
  • Ivanova, M.
  • Meulenberg, Wilhem Albert
La5.5WO11.25- is a proton-conducting oxide that shows high protonic conductivity, sufficient electronic conductivity, and stability in moist CO2 environments. However, the H-2 flows achieved to date when using La5.5WO11.25- membranes are still below the threshold for practical application in industrial processes. With the aim of improving the H-2 flow obtained with this material, La5.5WO11.25- was doped in the W position by using Re and Mo; the chosen stoichiometry was La5.5W0.8M0.2O11.25-. This work presents the electrochemical characterization of these two compounds under reducing conditions, the H-2 separation properties, as well as the influence of the H-2 concentration in the feed stream, degree of humidification, and operating temperature. Doping with both Re and Mo enabled the magnitude of H-2 permeation to be enhanced, reaching unrivaled values of up to 0.095mLmin(-1)cm(-2) at 700 degrees C for a La5.5W0.8Re0.2O11.25- membrane (760m thick). The spent membranes were investigated by using XRD, SEM, and TEM on focused-ion beam lamellas. Furthermore, the stability in CO2-rich and H2S-containing atmospheres was evaluated, and the compounds were shown to be stable in the atmospheres studied., Financial support from the Spanish Ministry for Science and Innovation (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen separation and stability study of ceramic membranes based on the system Nd5LnWO12

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
This contribution presents the preparation, permeation and stability study of mixed protonic-electronic conducting membranes based on the system Nd(5)LnWO(12). The tung-states Ln(6)WO(12) are proton conducting crystalline materials, which show sufficient protonic and electronic mixed conductivity and stability in moist CO2 environments to consider them as potential candidates for the separation of hydrogen at high temperatures. Hydrogen separation properties of A-substoichiometric Nd6WO12 and Nd5LaWO12 were systematically analyzed, i.e. the influence of the H-2 concentration in feed stream, humidification degree and operating temperature on the hydrogen separation was studied. Finally, the stability of these materials at different temperatures and CO2-rich and sulfurcontaining environments was evaluated., Financial support by the Spanish Ministry for Science and Innovation (Grant JAE-Pre 08-0058 and Project ENE2008-06302/CON) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Authors wish to thank Sandra Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of CO2 Protective Layers by Spray Pyrolysis for Ceramic Oxygen Transport Membranes

  • García Torregrosa, Iván
  • Lobera González, Maria Pilar
  • Solis Díaz, Cecilia
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ceramic mixed ionic¿electronic conducting (MIEC) membranes enable very selective oxygen separation from air at high temperatures. Two major potential applications of oxygen-transport membranes are: i) oxygen production for oxyfuel power plants, and, ii) integration within high-temperature catalytic membrane reactors for methane or alkane upgrading by selective oxidative conversions. However, these applications involve contact with carbon-bearing atmospheres and most state-of-the-art highly permeable MIEC membranes do not tolerate operation under CO 2 -rich environments due to carbonation processes. The present contribution shows our ¿ rst attempts in the development of ceria-based protective thin layers on monolithic LSCF membranes. Gd-doped ceria (CGO) deposition is carried out by air blast spray pyrolysis on mirror-polished LSCF disc membranes. The layer thickness is maintained below 0.4 ¿ m in order to prevent the formation of cracks during thermal cycling and minimize limitations caused by the reduced oxygen permeability through the ceria layer. After optimization of the spraying process, smooth crack-free dense coatings are obtained with high crystallinity in the as-deposited state. The layers are characterized by XRD, SEM, AFM, DC-conductivity measurements, interferometry and optical microscopy. Oxygen separation is studied on coated LSCF using air as the feed and argon/CO 2 mixtures as the sweep gas in the temperature range 650¿1000 ° C. The protected membrane exhibits a higher stability than the uncoated LSCF membrane, although the nominal oxygen ¿ ux is slightly reduced at temperatures below 850 ° C due to the limited ambipolar conductivity of doped ceria in the range of oxygen partial pressures investigated. Moreover, the protective layer (250 nm thickness) remains stable after the permeation testing., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058), the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the transport properties of the mixed ionic electronic conductor Ce 1-x Tb x O 2- + Co (x=0.1, 0.2) and evaluation as oxygen-transport membrane

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
[EN] Tb-doped ceria materials have been synthesized by the coprecipitation method. Cobalt oxide (2 mol %) has been added in order to improve the sinterability and conductivity. XRD measurements suggest that a part of the cobalt is incorporated in the ceria lattice. Ce1¿xTbxO2¿¿ materials showed predominantly ionic conductivity, but the mixed ionic electronic conductivity can be tuned by modifying Tb and Co doping level and temperature range. The ambipolar conductivity was determined by galvanic method coupled with gas permeation and these results support the applicability of these materials as oxygen transport membranes at high temperature. Ce1¿xTbxO2¿¿ +Co membranes are CO2 stable and yielded oxygen fluxes that can compete with reported perovskite materials. Oxygen diffusion and surface exchange coefficients in the range 1 ¿ 10¿5 to 1 ¿ 10¿4 cm2/s and 1 ¿ 10¿4 to 1 ¿ 10¿3 cm/s from 773 to 1023 K have been obtained by conductivity relaxation., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, Grant JAE-Pre 08-0058, and Grant BES-2009-015835), Spanish Industry Ministry (Project IAP-560620-2008-17), the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701) and Instalaciones Inabensa S.A. is kindly acknowledged. The help of Dr. Jorda (HT-XRD) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid state transport and hydrogen permeation in the system Nd5.5W1-xRexO11.25-d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Somacescu, Simona
Nd5.5WO11.25-delta is a mixed proton-electron conducting oxide, which shows an important mixed conductivity and stability in moist CO2 environments. However, the H-2 fluxes obtained with this material are not high enough in order to apply them as H-2 separation membranes in industrial applications. Re6+ cation presents similar ionic radii than W6+ and Re6+ can be reduced to different oxidation states under the operating conditions typical for hydrogen membrane separation. This fact leads to the improvement of the electronic conductivity and produce. the generation of oxygen vacancies with the subsequent increase in the ionic conductivity. This work presents the synthesis as nanosized powders as well as the structural and electrochemical characterization of mixed conducting materials based on the system Nd5.5W1-xRexO11.25-delta where x = 0, 0.1, 0.5 and 1. The evolution of the crystalline structure and the shrinkage behavior are studied as a function of the sintering temperature. Total conductivity in reducing and oxidizing environments is studied systematically for samples sintered at 1350 degrees C. The H/D isotopic effect and the hydration influence are also analyzed by means of DC-electrochemical measurements. H-2 permeation is carried out for the selected compound, Nd5.5W0.5Re0.5O11.25-delta, in the range of 700-1000 degrees C, obtaining a peak H-2 flux value of 0.08 mL.min(-1).cm(-2). The reduction of the Re cation in this compound under reducing conditions is investigated by TPR and XPS. Finally, the stability of this material under CO2-rich gas stream was evaluated by measuring H-2 permeation using a CO2 containing atmosphere as sweep gas., Financial support by the Spanish Government (Grant Nos. JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050, and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La5.5WO12-δ Characterisation of Transport Properties under Oxidizing Conditions: A Conductivity Relaxation

  • Solis Díaz, Cecilia
  • Haugsrud, Reidar
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The conduction properties of La5.5WO12-δ have been studied by using the electrochemical conductivity relaxation technique. Exchange and diffusion coefficients have been obtained from relaxation experiments including measurements of conductivity transients from (1) oxidation reduction under dry and wet oxygen and (2) hydration dehydration for both H2O-saturated and D2O-saturated oxygen at atmospheric pressure. The evolution of the total conductivity as a function of temperature, oxygen partial pressure, and the presence of H2O or D2O has moreover been characterized. The exchange coefficient for oxygen and water incorporation was calculated from the relaxation experiments. It was also possible to determine the coefficients for oxygen vacancy/oxygen ion (in dry and hydrated state) diffusion and for ambipolar diffusion of water. Oxygen vacancy/oxide ion diffusion is apparently not affected by the hydration state within the studied temperature range and water and oxygen partial pressures. The ambipolar water diffusion coefficient was significantly smaller than the one for the oxygen ion., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and Grant JAE-Pre 08-0058) is kindly acknowledged. Authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of transport properties and hydrogen permeation of chemically-stable proton conducting oxides bases on the system BaZr1-x-yYxMyO3-&amp, #948

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Ivanova, Mariya
  • Solis Díaz, Cecilia
  • Roitsch, Stefan
  • Meulenberg, Wilhem Albert
[EN] The structural and transport properties as well as the chemical stability of a series of proton-conducting oxides based on yttrium-doped barium zirconate were investigated. Specifically, Pr-, Fe- and Mn-doped BaZr1-x-yYxMyO3-delta compounds were prepared by solid state reaction. The compound exhibiting the highest total and protonic conductivity at elevated temperatures under reducing atmospheres was BaZr0.8Y0.15Mn0.05O3-delta. Temperature-programmed reduction experiments revealed a particular redox behavior related to the Mn-species under selected conditions. The hydrogen permeation was thoroughly studied as a function of the temperature, hydrogen concentration and the humidification degree in the sweep gas. Moreover, the transient processes induced by alternate step changes in the humidification degree of the sweep gas were analysed. The highest steady hydrogen evolution flow exceeded 0.03 ml min(-1) cm(-2) (0.9 mm-thick membrane) at 1000 degrees C for the humidified sweep gas. The stability of BaZr0.8Y0.15M0.05O3-delta under operation-relevant atmospheres (CO2-rich reducing atmosphere at high temperature) was tested using different techniques ( X-ray diffraction (XRD), Raman, SEM, TEM and TG) and the results showed that this material is stable even when exposed to 115 ppm H2S., Financial support by the Spanish Ministry for Economics and Competitiveness (JAE-Pre 08-0058, ENE2008-06302 and ENE2011-24761 grants) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Dr M. Ivanova thanks the Northern European Innovative Energy Research Program N-INNER (grant no. 09- 064274) and the German Federal Ministry of Education and Research (BMBF) for supporting the N-INNER Project ‘‘Novel High Temperature Proton and Mixed-Proton Electron Conductors for Fuel Cells and H2-separation membranes’’ (Contract 03SF0330).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrahigh oxygen permeation flux through supported Ba0.5Sr0.5Co0.8Fe0.2O3-delta membranes

  • Baumann, S.
  • Lobera González, Maria Pilar
  • Schulze-Kueppers, F.
  • Meulenberg, W. A.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
[EN] Oxygen transport membranes made of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) were manufactured by tape casting and co-firing. The disk-shaped membranes consisted of a top gastight layer (70 mu m thick) and a porous substrate (830 mu m thick) with 34% open porosity. The variation of the permeation operation conditions allowed (i) the identification of the different limitations steps in the permeation process, i.e., bulk oxygen ion diffusion, catalytic surface exchange and gas phase diffusion in the membrane compartments and porous substrate, and (ii) the ultimate optimization of the oxygen flux. The variables considered in the systematic permeation study included the inlet gas flow rate of the sweep and air feed, the temperature and the nature of the oxygen feed gas (air or pure oxygen). Moreover, the influence of the deposition of a catalytic activation layer (17 mu m thick) made of BSCF on top of the thin gastight layer was investigated. As a result of this parametric study, unpreceded oxygen flux values were achieved, i.e., a maximum flux of 67.7 ml(STP) min(-1) cm(-2) was obtained at 1000 degrees C using pure oxygen as the feed and argon as the sweep, while a flux of 12.2 ml(STP) min(-1) cm(-2) at 1000 degrees C was obtained when air was used as the feed. (C) 2011 Elsevier BM. All rights reserved., Financial support from the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058), EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Mrs H. Burlet has contributed to this work with the careful revision of the English language.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the mixed protonic–electronic conducting materials based on (Nd5/6Ln1/6)5.5WO11.25−δ

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Schroeder, Michael
[EN] The tungstates Ln6WO12 are proton conducting materials exhibiting mixed (protonic and electronic) conductivity and remarkable stability in moist CO2 environments. Hydrogen-permeable membranes made of this kind of material find application in industrial gas separations such as hydrogen separation from hydrogen containing gases, for the implementation of pre-combustion strategies in fossil-fuel power plants and catalytic membrane reactors. This work presents a thorough characterization (structure, conduction and hydrogen permeation) of mixed conducting materials on the specific system (Nd5/6Ln1/6)5.5WO11.25 d (Ln: La, Ce, Pr, Eu, Tb). The evolution of the crystal structure and crystallite size was studied as a function of the lanthanide dopant. The total conductivity in different environments was investigated as a function of pO2 and temperature. Furthermore, the H/D isotopic effect and the hydration effect were also studied in reducing and oxidizing atmospheres by DC conductivity measurements. Hydrogen permeation was measured for all compounds in the range of 700 1000 C studying the effect of pH2 and the hydration degree of the membrane depending on the lanthanide dopant. Finally, the chemical stability of these materials at 800 C was evaluated in contact with a humidified CO2-rich gas stream., Financial support by the Spanish Ministry for Science and Innovation (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fluid Dynamic Modeling of Oxygen Permeation through Mixed Ionic-Electronic Conducting Membranes

  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The oxygen transport in a lab-scale experimental set-up for permeation testing of oxygen transport membranes has been modeled using computational fluid dynamics using Finite Element Analysis. The modeling considered gas hydrodynamics and oxygen diffusion in the gas phase and vacancy diffusion of oxygen in a perovskite disc-shaped membrane at 1273. K. In a first step, the model allowed obtaining the coefficient diffusion of oxygen. The parametric study showed that the set-up geometry and flow rate in the air compartment did not have major influence in the oxygen transport. However, very important polarization effects in the sweep-gas (argon) compartment were identified. The highest oxygen permeation flux and the lowest oxygen concentration on the membrane surface were obtained for the following conditions (in increasing order of importance): (1) a large gas inlet radius; (2) short gas inlet distance; and (3) a high gas flow rate. © 2011 Elsevier B.V., The Spanish Ministry for Science and Innovation (JAE-Pre 08-0058 grant and ENE2008-06302 project) and through FP7 NASA-OTM Project (NMP3-SL-2009-228701) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen permeation through Nd-doped La6WO12 membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
[EN] This work presents the preparation and characterization of the hydrogen permeation of a mixed protonic-electronic conducting membrane based on the doped system La6WO12, in this instance, (La5/6Nd1/6)(5.5)WO12-delta. The tungstates Ln(6)WO(12) present sufficient protonic and electronic mixed conductivity and stability in moist CO2 environments and are potential candidates for the separation of hydrogen at high temperatures. Hydrogen separation properties of (La5/6Nd1/6)(5.5)WO12-delta were systematically analyzed, specifically, the influence of the H-2 concentration in feed stream, humidification degree and operating temperature on the hydrogen separation were studied. The best permeation results were achieved when both membrane sides were humidified (2.5 vol.% H2O), i.e., the highest hydrogen flux was 0.046 mL min(-1) cm(-2) at 1000 degrees C for membrane thickness of 0.9 mm. (C) 2011 Elsevier B.V. All rights reserved., Financial support by the Spanish Ministry for Science and Innovation (grant JAE-Pre 08–0058, projects ENE2008-06302 and ENE2011-24761) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring mixed ionic-electronic conduction in H-2 permeable membranes based on the system Nd5.5W1-xMoxO11.25-delta

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Somacescu, Simona
Lanthanide tungstates (Ln(6)WO(12)) are promising candidates for the development of ceramic hydrogen transport membranes since they exhibit mixed ionic (proton and oxygen ion transport) and electronic conductivity and remarkable stability in a moist CO2 environment at high temperatures. This work presents the structural and electrochemical characterization of mixed conducting materials for the specific system Nd5.5W1-xMoxO11.25-delta (x = 0, 0.1, 0.5 and 1). Evolution of the crystalline structure is studied as a function of the sintering temperature. Shrinkage behavior is analyzed for all compositions in the temperature range from 1000 degrees C to 1500 degrees C and these compounds show high sintering activity even at relatively low temperatures. The total conductivity in different environments is studied systematically for samples sintered at 1350 degrees C. The H/D isotopic effect is also studied by DC-electrochemical measurements. H-2 permeation is investigated for the selected compound Nd5.5W0.5Mo0.5O11.25-delta in the range of 700-1000 degrees C achieving values of 0.3 mL min(-1) cm(-2) for a 0.9 mm thick disc membrane. Finally, the stability of this material under different CO2 and H2S-rich atmospheres at high temperatures is proven., Financial support by the Spanish Government (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of ODHE membrane reactor based on mixed ionic electronicconductor using soft computing techniques

  • Lobera González, Maria Pilar
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Argente, Estefanía|||0000-0002-5431-3868
  • Botti V.|||0000-0002-6507-2756
[EN] This work presents the optimization of the operating conditions of a membrane reactor for the oxidative dehydrogenation of ethane. The catalytic membrane reactor is based on a mixed ionic-electronic conducting material, i.e. Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(delta-3), which presents high oxygen flux above 750 degrees C under sufficient chemical potential gradient. Specifically, diluted ethane is fed into the reactor chamber and air (or diluted air) is flushed to the other side of the membrane. A framework based on Soft Computing techniques has been used to maximize the ethylene yield by simultaneously varying five operation variables: nominal reactor temperature (Temp); gas flow in the reaction compartment (QHC); gas flow in the oxygen-rich compartment (QAir); ethane concentration in the reaction compartment (%C(2)H(6)); and oxygen concentration in oxygen-rich compartment (%O(2)). The optimization tool combines a genetic algorithm guided by a neural network model. This shows how the neural network model for this particular problem is obtained and the analysis of its behavior along the optimization process. The optimization process is analyzed in terms of: (1) catalytic figures of merit, i.e., evolution of yield and selectivity towards different products and (2) framework behavior and variable significance. The two experimental areas maximizing the ethylene yield are explored and analyzed. The highest yield reached in the optimization process exceeded 87%. (C) 2010 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058, CONSOLIDER-INGENIO 2010 under grant CSD2007-00022, TIN2008-04446/TIN project and TIN2009-13839-C03-01 project, which are co-funded by the Spanish government and FEDER funds), EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High Ethylene Production through ODHE Membrane Reactors based on Fast Oxygen-Ion Conductors

  • Lobera González, Maria Pilar
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] High ethylene productivity through the oxidative dehydrogenation of ethane has been achieved in a catalytic membrane reactor based on a highly solid-state oxygen permeable material (Ba0.5Sr0.5Co0.8Fe0.2O3 d). Ethylene is selectively produced by avoiding the direct contact of molecular oxygen and hydrocarbons, thereby minimizing the oxygen concentration in the reaction side. Another key aspect in the process is the dilution of ethane in the feed to achieve high ethylene yields. There exists a specific combination of the ethane concentration and feed flow that maximizes ethylene productivity, whereas the diluting gas nature has a direct impact on the formation of higher olefins and coking issues. Indeed, the use of methane as an almost-inert dilutant allows the reduction of oligomerization and aromatization of the formed ethylene and therefore improves the reactor stability even at operating temperatures from 800 to 900 8C. This behavior is attributed to the competitive adsorption of methane and ethane/ethylene, the modification of the radical-driven homogeneous reaction, and the change of partially reducible membrane surface. The productivity values achieved at 8508C were 383 mLmin 1cm 2 for Ar and 353 mLmin 1cm 2 for CH4, with a selectivity of 80 and 90%, respectively, Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058), the European Union through FP7 NASA-OTM Project (NMP3-SL-2009228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen separation in La5.5WO11.25-delta membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Scherb, Tobias
  • Schumacher, Gerhard
Tungstates Ln(6)WO(12) are proton conducting crystalline materials which show significant mixed protonic and electronic conductivity and stability in moist CO2 environments. These materials are promising candidates for hydrogen separation membranes at temperatures above 700 degrees C, especially when integrated in intensified processes as catalytic membrane reactors. From this family of compounds, La6-x WOy (0.4 < x < 0.7) presents the highest protonic conductivity and hydrogen permeability. This contribution presents the preparation, hydrogen permeation and stability study of La5.5WO11.25-delta membranes. Hydrogen separation properties of La5.5WO11.25-delta were systematically analyzed, i.e. the influence of the H-2 concentration in feed stream, humidification degree and operating temperature were investigated. The integrity of the La5.5WO11.25-delta after the hydrogen permeation experiments was confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy. The stability of La5.5WO11.25-delta, permeation when CO2 containing atmosphere was used as sweep gas was evaluated. Furthermore, the stability of this compound in CO2-rich and sulfur-containing environments was confirmed by XRD. (C) 2013 Elsevier B.V. All rights reserved., Financial support by the Spanish Government (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the Helmholtz Association of German Research Centers through the portfolio topic MEM-BRAIN is kindly acknowledged. The authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transport properties and oxidation and hydration kinetics of Mo doped Nd5.5WO11.25-delta

  • Ruf, Mischa
  • Solis Díaz, Cecilia
  • Dittmeyer, Roland
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Surface exchange and diffusion coefficients of the protonic conductor Nd5.5W0.5Mo0.5O11.25-delta were obtained by means of conductivity relaxation experiments as a function of temperature, pO(2) and pH(2)O. The two-fold non-monotonic behaviour in the hydration/dehydration relaxations allows proton and oxygen vacancy coefficients to be independently determined whereas the H/D isotopic effect was confirmed., Financial support by the Spanish Government (Grants JAE-Pre 08-0058, ENE2011-24761, CSD-2009-0050 and SEV-2012-0267) and the German Federal Ministry for Education and Research through the portfolio topic MEM-BRAIN of the Helmholtz Association of German Research Centers is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethylene Production by ODHE in Catalytic Modified Ba0.5Sr0.5Co0.8Fe0.2O3 Membrane Reactors

  • Lobera González, Maria Pilar
  • García Fayos, Julio
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Process intensification by the integration of membranes and high-temperature reactors offers several advantages with regard to conventional process schemes, that is, energy saving, safe operation, reduced plant/unit size, and higher process performance, for example, higher productivity, catalytic activity, selectivity, or stability. We present the study of oxidative dehydrogenation of ethane at 850 8C on a catalytic membrane reactor based on a mixed ionic¿electronic conducting membrane. The surface of the membrane made of Ba0.5Sr0.5Co0.8Fe0.2O3 d has been activated by using different porous catalytic layers based on perovskites. The layer was deposited by screen printing, and the porosity and thickness was studied for the catalyst composition. The different catalyst formulations are based on partial substitution of A- and B-site atoms of doped strontium ferrite/cobaltites (A0.6Sr0.4Co0.5Fe0.5O3 d and Ba0.6Sr0.4BO3 d) and were synthesized by an ethylenediaminetetraacetic acid¿citrate complexation route. The use of a disk-shaped membrane in the reactor enabled the direct contact of gaseous oxygen and hydrocarbons to be avoided, and thus, the ethylene content increased. High ethylene yields (up to 81%) were obtained by using a catalytic coating based on Ba0.5Sr0.5Co0.8Fe0.2O3 d, which included macropores produced by the addition of graphite platelets into the screen-printing ink. The promising catalytic results obtained with this catalytically modified membrane reactor are attributed to the combination of 1) the high activity, as a result of the high temperature and oxygen species diffusing through the membrane; 2) the control of oxygen dosing and the low concentration of molecules in the gas phase; and 3) suitable fluid dynamics, which enables appropriate feed contact with the membrane and the rapid removal of products., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, ENE2011-24761 and FPI Grant JAE-Pre 08-0058), the EU through the FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. We thank S. Jimenez for material preparation, M. Fabuel for TPD experiments, and Forschungszentrum Julich for SEM analysis of BSCF catalytic layer.