Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic Surface Promotion of Composite Cathodes in Protonic Ceramic Fuel Cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Bozza, Francesco
  • Bonanos, Nikolaos
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Composite cathodes based on an electronic conductor and a protonic conductor show advantages for protonic ceramic fuel cells. In this work, the performance of a La5.5WO11.25-delta/La0.8Sr0.2MnO3+delta (LWO/LSM) composite cathode in a fuel cell based on an LWO protonic conducting electrolyte is shown and catalytically improved. The limiting processes were first unambiguously associated to surface steps, and the reaction rate was significantly enhanced by 1) tailoring the catalytic activity through electrode surface impregnation with intrinsically catalytic nanoparticles and 2) electrochemical activation of surface species by imposing a net current through the electrode., Funding from the European Union (FP7 Project EFFIPROGrant Agreement 227560 and FP7 Project ELECTRAGrant Agreement 621244) and the Spanish Government (ENE2011-24761 and SEV-2012-0267) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical properties of PSFC-BCYb composites as cathodes for proton conducting solid oxide fuel cells

  • Vert Belenguer, Vicente Bernardo
  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed conducing ceramic¿ceramic composites for proton conducting fuel cells have been investigated. Different ratios of Pr0.58Sr0.4Fe0.8Co0.2O3¿¿¿BaCe0.9Yb0.1O3¿¿ composites have been tested as cathodes in symmetrical cells based on BaCe0.9Y0.1O3¿¿ dense electrolytes. Impedance measurements have been carried out in the temperature range of 600¿800¿°C under wet (2.5%) air. Different dilutions on both oxygen partial pressure and water content have been performed as a function of the temperature in order to characterise the processes (surface reaction and charge transport) occurring at the composite electrode under oxidising conditions. The variation of the impedance spectra after replacing protonated water by heavy water has been studied in order to understand the role of the proton transport in the overall composite cathode operation. Additional four-point DC-conductivity measurements have been done under different atmospheres comprising different oxygen partial pressures and H2O/D2O saturation for composites and single materials., Funding from Universitat Politècnica de València (grant FPI-UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE-2008-06302) and European Union (FP7 Project EFFIPRO – grant Agreement 227560) are kindly acknowledged. Authors are indebted to S. Jiménez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epitaxial Films of the proton-conducting Ca-doped LaNbO4 material and study of their charge transport properties

  • Cavallaro, Andrea
  • Solis Díaz, Cecilia
  • Garcia, Pablo R.
  • Ballesteros, Belén
  • Santiso, Jose L.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ca-doped LaNbO4 (LCNO) material has shown outstanding stability in harsh environments in combination with moderate proton-conductivity in polycrystalline samples at intermediate temperatures below 800 degrees C under a wet atmosphere. However, in polycrystalline materials the role of grain boundaries is believed to play a predominant role in protonic conductivity, which may make more difficult the study of the intrinsic properties of the material. For that reason the present study focuses on the preparation of epitaxial films by pulsed laser deposition on NdGaO3 (110) single crystal substrates. Under certain deposition conditions the films grow epitaxially with a monoclinic structure (fergusonite) and b-axis orientation. A polymorph change between the monoclinic and tetragonal structure has been observed at 250 degrees C. The film charge transport properties are analyzed under different atmospheres, dry and wet O-2 and H-2 as well as under deuterated conditions by using D-2 and D2O in order to check for the characteristic isotopic effect of the proton transport. Although a certain proton conductivity was observed under reducing wet atmospheres unexpected large DC conductivity values (of about 5.5 S/cm for the 80 nm thin LCNO film at 800 degrees C in dry O-2) have been observed for all films and ambient conditions. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge the financial support of the European Union (FP7 Project EFFIPRO, grant agreement 227560), and the Spanish Government (MAT2008-04931, ENE2008-06302, Consolider-Ingenio 2010-CSD2008-023 and CSIC Intramural 200880I093 grants). One author (A.C.) acknowledges the support of a “Juan de la Cierva” postdoctoral fellowship from the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed Proton-Electron Conducting Chromite Electrocatalysts as Anode Materials for LWO-Based Solid Oxide Fuel Cells

  • Solis Díaz, Cecilia
  • Vert Belenguer, Vicente Bernardo
  • Escolástico Rozalén, Sonia
  • Roitsch, Stefan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Chromite anodes in LWO PC-SOFC: Chemically compatible LSCN/LWO symmetric cells show the high protonic conductivity and p-type electronic conductivity of LSCN in reducing atmospheres. This allows to avoid blending with other protonic or electronic materials and enlarges the surface area., Funding from the Spanish Government (ENE2011-24761 grant) and the European Union (FP7 Project EFFIPRO, Grant Agreement 227560) is acknowledged. The authors are indebted to S. Jimenez and M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical properties of composite cathodes for La0.995Ca0.005NbO4-delta-based proton conducting fuel cells

  • Solis Díaz, Cecilia
  • Vert Belenguer, Vicente Bernardo
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed-conducting ceramic-ceramic (cer-cer) composites for proton-conducting solid oxide fuel cells (PC-SOFCs) based on La0.995Ca0.005NbO4-delta (LCN) have been investigated. Different ratios of La0.8Sr0.2MnO3-delta/La0.995Ca0.005NbO4-delta (LSM/LCN) composites have been tested as cathodes in symmetrical cells based on La0.995Ca0.005NbO4-delta dense electrolytes while two different electrode sintering temperatures (1050 and 1150 degrees C) have been studied. Additionally, different LCN doped materials (Pr, Ce and Mn), which present a different conduction behavior, have been used as components in composite cathodes (mixtures of LSM/doped-LCN 50/50 vol.%). Electrochemical impedance spectroscopy analysis has been carried out in the temperature range 700-900 degrees C under moist (2.5%) atmospheres. Different oxygen partial pressures (pO(2)) have been employed in order to characterize the processes (surface reaction and charge transport) occurring at the composite electrode under oxidizing conditions. The main outcome of the present study is that the mixture of LSM (electronic phase) and LCN (protonic phase) enables to decrease substantially the electrode polarization resistance. This is ascribed to the increase in the three-phase-boundary length and therefore it allows electrochemical reactions to occur in a larger region (thickness) of the electrode., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and CSIC Intramural 2008801093) are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La5.5WO12-δ Characterisation of Transport Properties under Oxidizing Conditions: A Conductivity Relaxation

  • Solis Díaz, Cecilia
  • Haugsrud, Reidar
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The conduction properties of La5.5WO12-δ have been studied by using the electrochemical conductivity relaxation technique. Exchange and diffusion coefficients have been obtained from relaxation experiments including measurements of conductivity transients from (1) oxidation reduction under dry and wet oxygen and (2) hydration dehydration for both H2O-saturated and D2O-saturated oxygen at atmospheric pressure. The evolution of the total conductivity as a function of temperature, oxygen partial pressure, and the presence of H2O or D2O has moreover been characterized. The exchange coefficient for oxygen and water incorporation was calculated from the relaxation experiments. It was also possible to determine the coefficients for oxygen vacancy/oxygen ion (in dry and hydrated state) diffusion and for ambipolar diffusion of water. Oxygen vacancy/oxide ion diffusion is apparently not affected by the hydration state within the studied temperature range and water and oxygen partial pressures. The ambipolar water diffusion coefficient was significantly smaller than the one for the oxygen ion., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and Grant JAE-Pre 08-0058) is kindly acknowledged. Authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cathode materials for La0.995Ca0.005NbO4 proton ceramic electrolyte

  • Kravchyk, K.V.
  • Quarez, E.
  • Solis Díaz, Cecilia
  • Joubert, O.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The study presents the chemical and mechanical compatibility of the proton conducting electrolyte La0.995Ca0.005NbO4 (LCNO) with the LSM, LSCM and BSCF cathodes and the electrochemical performance of symmetrical cells based on LCNO. After annealing at high temperature the electrolyte-cathode mixtures in air and wet air, the obtained products were analyzed by X-ray powder diffraction (XRPD). The microstructure of the cathode and electrolyte materials and the interfaces were observed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDX). The results show that LSCM cathode is chemically and mechanically stable with the LCNO electrolyte although the BSCF cathode reacts with it. Cation diffusion was observed between LSM cathode and LCNO electrolyte after the heat treatment of their mixture at T = 1150 degrees C. The electrochemical study performed on symmetrical cells revealed that the LSCM cathode presents the lowest value of area specific resistance (ASR) compared to the ones of the LSM and BSCF cathodes: ASR(LSCM) = 35 Omega cm(2); ASR(LSM) = 57 Omega cm(2); ASR(BSCF) = 416 Omega cm(2) (in humidified air at 750 degrees C). Finally, a CER-CER approach was used in order to minimize the polarisation resistance of the LSM cathode by mixing LSM and LCNO in different volumetric ratios. The lowest value of ASR for LSM-based composite cathode was obtained by adding 50 vol.% of LCNO to LSM cathode (ASR(LSM/LCNO) = 22 Omega cm(2) in humidified air at 750 degrees C)., This work has been performed in the frame of the FP7 Project EFFIPRO "Efficient and robust fuel cell with novel ceramic proton conducting electrolyte" (Grant Agreement 227560).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic surface promotion of highly active La0.85Sr0.15Cr0.8Ni0.2O3-delta anodes for La5.6WO11.4-delta based proton conducting fuel cells

  • Solis Díaz, Cecilia
  • Bozza, F.
  • Bonanos, Nikos
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] La0.85Sr0.15CrO3-delta (LSC), La0.85Sr0.15Cr0.8Ni0.2O3-delta (LSCN) and LSCN infiltrated with Ni nanoparticles were tested as anodes for symmetrical cells based on La5.6WO11.4-delta (LWO) protonic electrolyte. These chromite-based electrode materials are compatible with LWO material, in contrast to the widely used NiO. Under typical anode reducing conditions, Ni is segregated from the LSCN lattice on the grain surface as metallic Ni nanoparticles, which are proved to be compatible with LWO in reducing conditions. These Ni nanoparticles become the catalytic active sites for the H-2 oxidation reaction in proton conducing anodes and the electrode performance is substantially improved regarding to pure LSC. Ni nanoparticle infiltration further improves the catalytic promotion of the anode, reducing the polarization resistance (R-p) previously limited by low frequency surface related processes. Indeed, the R-p, values achieved for LSCN infiltrated with Ni, e.g. 0.47 Omega cm(2) at 700 degrees C, suggest the practical application of this kind of anodes in proton conducting solid oxide fuel cells (PC-SOFC). (C) 2013 Elsevier B.V. All rights reserved., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560), the Spanish Government (ENE2011-24761, SEV-2012-0267 and CSIC Intramural 2008801093 grants) is kindly acknowledged. The authors thank M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and understanding of La0.85Sr0.15Cr1-xNixO3-delta anodes for La5.6WO11.4-delta-based Proton Conducting Solid Oxide Fuel Cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Balaguer, María
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Porous electrodes based on the system La0.85Sr0.15Cr1-xNixO3-delta (x = 0.1 and 0.2) have been investigated as anodes for proton conducting solid oxide fuel cells based on the La5.6WO11.4-delta (LWO) electrolyte material. The microstructure of the anodes was optimized by varying both the starting powder morphology and the final anode sintering temperature. Two different electrode thicknesses were studied, i.e. 15 and 30 gm. The importance of the catalytic role of Ni was also studied by using different concentrations of Ni (10% and 20%) in the chromite and by tuning the Ni particle sizes through the control of the reduction temperature. Additionally, a ceramic-ceramic (cer-cer) composite electrode comprising a physical mixture of the optimized chromite and LWO phase was also considered. Finally, a kinetics study and modeling based on Langmuir-Hinshelwood mechanism was carried out in order to quantitatively describe the rate of dissociative adsorption of H-2 on the Ni particles spread on the chromite surface., Funding from the Spanish Government (ENE2011-24761, SEV-2012-0267, BES-2012-053180) and European Union (FP7 Project EFFIPRO - Grant Agreement 227560) are kindly acknowledged. Authors are indebted to M. Fabuel for sample preparation and Forschungszentrum Julich (Dr. M. Ivanova) for SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical properties of composite fuel cell cathodes for La5.5WO12−δ proton conducting electrolytes

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Roitsch, Stefan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] New composite cathodes for proton conducting solid oxide fuel cells (PC-SOFCs) based on the novel La5.5WO12-delta (LWO) electrolyte have been developed. First the applicability of LWO as a protonic electrolyte has been proved by recording the OCV in a Pt/LWO/Pt cell as a function of the temperature, matching the expected Nernst voltage. In order to improve the electrode performance on LWO PC-SOFCs, composite cathodes have been prepared by mixing the La0.8Sr0.2MnO3-delta (LSM) electronic phase with the LWO protonic phase. The ceramic-ceramic (cer-cer) composites have been electrochemically studied as cathodes on LWO dense electrolytes in symmetrical cells. Different ratios of both phases and two different electrode sintering temperatures (1050 and 1150 degrees C) have been studied. Electrochemical impedance spectroscopy (EIS) analysis has been carried out in the temperature range 700-900 degrees C under moist (2.5% H2O) atmospheres. Different oxygen partial pressures (pO(2)) have been employed in order to characterize the processes (surface reaction and charge transport) taking place at the composite cathode. A substantial improvement in the cathode performance has been attained by the addition of the LWO protonic phase into the LSM electronic material. From the electrochemical analysis it can be inferred that electrode enhancement is principally ascribed to the increase in the three-phase-boundary length, which enables electrochemical reactions to occur along the thickness of the electrode., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560), the Spanish Government (ENE2011-24761 and CSIC Intramural 200880I093 grants) is kindly acknowledged. The authors thank Dr M. Ivanova and Dr D. Sebold (Forschungszentrum Julich, IEK-1) for sample preparation for microscopy analysis, and Mrs M. Fabuel and Dr V. B. Vert for assistance in electrochemical tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adjusting the conduction properties of La0.995Ca0.005NbO4 by doping for proton conducting fuel cells electrode operation

  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Structural characterization and transport properties of A- (Ce and Pr) and B-site (Mn) doped La0.995Ca0.005- NbO4 (-) (delta) (LCN) have been investigated. Conductivity data have been analyzed in the temperature range from 400 to 800 degrees C as a function of the oxygen partial pressure under dry atmospheres and under different wet atmospheres. All compounds present changes in the activation energy due to a phase transformation at ca. 550 degrees C. Under wet conditions the conductivity is predominantly protonic in all compounds except for the Ce doped sample under oxidizing atmospheres. The conductivity of Ce doped sample is principally electronic at high pO(2) and high temperatures while it becomes more ionic at low pO(2) and temperatures. The combination of n-type electronic and protonic conductivity for Ce doped LCN under reducing atmospheres suggests its potential application as an anode component for LCN-based proton conducting fuel cells (PCFC). Moreover, Pr doped LCN shows remarkable p-type electronic conductivity at high pO(2) in combination with protonic conductivity, which are interesting properties for LCN-based PCFC cathode components. Furthermore, Ce and Pr addition have allowed increasing the sintering activity with respect to LCN powders. The activation energies and the preexponential factors under wet atmospheres have been studied and correlated. It was found that they obey the Meyer-Neldel law and an estimation of the activation energy of protons in both crystal structures has been derived. (C) 2011 Elsevier B.V. All rights reserved., Funding from the European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and CSIC Intramural 200880I093) is kindly acknowledged. Authors are indebted to M. Fabuel for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Pr and Pr and Co doped La2NiO4+&amp, #948, as cathodes for La5.5WO11.25-&amp, #948, based protonic conducting fuel cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The mixed ionic-electronic conductor La2NiO4+delta was investigated as potential cathode material for protonic conducting solid oxide fuel cells (PC-SOFCs) based on La5.5WO11.25-delta electrolyte. Firstly the chemical compatibility between cathode and electrolyte phases (La2NiO4+delta and La5.5WO11.25-delta respectively) was studied. Then, the electrochemical properties of this cathode were improved by partially substituting La and/or Ni, specifically La1.5Pr0.5NiO4+delta and La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) were considered. These two doped materials showed improved electrical conductivity and reduced polarization resistance, when tested as cathode in symmetrical cells. In a second step, the microstructure of La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) was optimized by varying the firing temperature of the cathode. The performance of these mixed conductors is limited by medium frequencies associated processes while they show lower polarization resistances (Rp) than conventional composites based on La5.5WO11.25-delta and pure electronic conductors. La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) cathode sintered at 1050 degrees C exhibits the best electrochemical performance on a La5.5WO11.25-delta-based PC-SOFC, achieving Rp = 0.62 Omega cm(2) at 750 degrees C in wet air., Funding from European Union (FP7 Project EFFIPRO - Grant agreement 227560), the Spanish Government (ENE2011-24761, SEV-2012-0267, BES-2012-053180 and CSIC Intramural 200880I093 grants) is kindly acknowledged. The authors thank M. Fabuel for sample preparation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the development of proton ceramic fuel cells based on Ca-doped LaNbO4 as electrolyte

  • Norby, Truls
  • Magrasó, Anna
We review the key properties of Ca-doped LaNbO4 (LCNO) and related materials for use as proton conducting electrolyte, from the discovery of its proton conductivity, through developments of synthesis and production, anodes and cathodes, to demonstrations of it in laboratory fuel cells, exemplified through published and new results from a range of collaborative projects in Norway and Europe the last years. Important new knowledge has been obtained concerning the reliable synthesis of line compounds like LaNbO4, B-site doping and co-doping, grain boundary resistance, phase transformations, thin film fabrication, and electrodes for proton conducting ceramics. However, as LCNO still requires films too thin for reliable fabrication of large areas and operation over prolonged times, and since cathodes with acceptable electrocatalytic performance have not been identified, one must conclude that high-power fuel cells (and steam electrolysers) based on LCNO are not viable., Funding from the European Union (FP7 ENERGY Project EFFIPRO – Grant Agreement 227560) and The Research Council of Norway (notably projects NANOMAT/NANIONET 182065/S10, NANOMAT/NANOPCFC 182090/S10, and RENERGI/STACKPRO 185322/S30) is kindly acknowledged, as are the collaboration and inputs from all contributing partners., Peer Reviewed