Pasar al contenido principal

DESARROLLO DE NUEVOS DISPOSITIVOS IONICOS PARA LA PRODUCCION EFICIENTE Y SOSTENIBLE DE ENERGIA Y PRODUCTOS QUIMICOS / COMBUSTIBLES

BES-2012-053180

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Formación de Personal Investigador
Subprograma Subprograma de Ayudas de Formación de Personal Investigador
Convocatoria Contratos Predoctorales
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and understanding of La0.85Sr0.15Cr1-xNixO3-delta anodes for La5.6WO11.4-delta-based Proton Conducting Solid Oxide Fuel Cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Balaguer, María
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Porous electrodes based on the system La0.85Sr0.15Cr1-xNixO3-delta (x = 0.1 and 0.2) have been investigated as anodes for proton conducting solid oxide fuel cells based on the La5.6WO11.4-delta (LWO) electrolyte material. The microstructure of the anodes was optimized by varying both the starting powder morphology and the final anode sintering temperature. Two different electrode thicknesses were studied, i.e. 15 and 30 gm. The importance of the catalytic role of Ni was also studied by using different concentrations of Ni (10% and 20%) in the chromite and by tuning the Ni particle sizes through the control of the reduction temperature. Additionally, a ceramic-ceramic (cer-cer) composite electrode comprising a physical mixture of the optimized chromite and LWO phase was also considered. Finally, a kinetics study and modeling based on Langmuir-Hinshelwood mechanism was carried out in order to quantitatively describe the rate of dissociative adsorption of H-2 on the Ni particles spread on the chromite surface., Funding from the Spanish Government (ENE2011-24761, SEV-2012-0267, BES-2012-053180) and European Union (FP7 Project EFFIPRO - Grant Agreement 227560) are kindly acknowledged. Authors are indebted to M. Fabuel for sample preparation and Forschungszentrum Julich (Dr. M. Ivanova) for SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Pr and Pr and Co doped La2NiO4+&amp, #948, as cathodes for La5.5WO11.25-&amp, #948, based protonic conducting fuel cells

  • Solis Díaz, Cecilia
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The mixed ionic-electronic conductor La2NiO4+delta was investigated as potential cathode material for protonic conducting solid oxide fuel cells (PC-SOFCs) based on La5.5WO11.25-delta electrolyte. Firstly the chemical compatibility between cathode and electrolyte phases (La2NiO4+delta and La5.5WO11.25-delta respectively) was studied. Then, the electrochemical properties of this cathode were improved by partially substituting La and/or Ni, specifically La1.5Pr0.5NiO4+delta and La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) were considered. These two doped materials showed improved electrical conductivity and reduced polarization resistance, when tested as cathode in symmetrical cells. In a second step, the microstructure of La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) was optimized by varying the firing temperature of the cathode. The performance of these mixed conductors is limited by medium frequencies associated processes while they show lower polarization resistances (Rp) than conventional composites based on La5.5WO11.25-delta and pure electronic conductors. La(1.5)Pro(0.5)Nio(0.8)Co(0.2)O(4+delta) cathode sintered at 1050 degrees C exhibits the best electrochemical performance on a La5.5WO11.25-delta-based PC-SOFC, achieving Rp = 0.62 Omega cm(2) at 750 degrees C in wet air., Funding from European Union (FP7 Project EFFIPRO - Grant agreement 227560), the Spanish Government (ENE2011-24761, SEV-2012-0267, BES-2012-053180 and CSIC Intramural 200880I093 grants) is kindly acknowledged. The authors thank M. Fabuel for sample preparation.