Pasar al contenido principal

PELICULAS DELGADAS NANOESTRUCTURADAS Y MULTICAPAS DE MATERIALES OXIDOS CON PROPIEDADES DE TRANSPORTE ELECTRONICO O MIXTO ELECTRONICO-IONICO DEPOSITADAS POR PLD CON CONTROL RHEED IN-SITU

MAT2008-04931

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epitaxial Films of the proton-conducting Ca-doped LaNbO4 material and study of their charge transport properties

  • Cavallaro, Andrea
  • Solis Díaz, Cecilia
  • Garcia, Pablo R.
  • Ballesteros, Belén
  • Santiso, Jose L.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ca-doped LaNbO4 (LCNO) material has shown outstanding stability in harsh environments in combination with moderate proton-conductivity in polycrystalline samples at intermediate temperatures below 800 degrees C under a wet atmosphere. However, in polycrystalline materials the role of grain boundaries is believed to play a predominant role in protonic conductivity, which may make more difficult the study of the intrinsic properties of the material. For that reason the present study focuses on the preparation of epitaxial films by pulsed laser deposition on NdGaO3 (110) single crystal substrates. Under certain deposition conditions the films grow epitaxially with a monoclinic structure (fergusonite) and b-axis orientation. A polymorph change between the monoclinic and tetragonal structure has been observed at 250 degrees C. The film charge transport properties are analyzed under different atmospheres, dry and wet O-2 and H-2 as well as under deuterated conditions by using D-2 and D2O in order to check for the characteristic isotopic effect of the proton transport. Although a certain proton conductivity was observed under reducing wet atmospheres unexpected large DC conductivity values (of about 5.5 S/cm for the 80 nm thin LCNO film at 800 degrees C in dry O-2) have been observed for all films and ambient conditions. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge the financial support of the European Union (FP7 Project EFFIPRO, grant agreement 227560), and the Spanish Government (MAT2008-04931, ENE2008-06302, Consolider-Ingenio 2010-CSD2008-023 and CSIC Intramural 200880I093 grants). One author (A.C.) acknowledges the support of a “Juan de la Cierva” postdoctoral fellowship from the Spanish Ministry of Science and Innovation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Full ceramic micro solid oxide fuel cells: Towards more reliable MEMS power generators operating at high temperatures

  • Garbayo, Iñigo
  • Pla, Dolors
  • Morata, Alex
  • Fonseca, Luis
  • Sabaté Vizcarra, Neus
  • Tarancón, Albert
Batteries, with a limited capacity, have dominated the power supply of portable devices for decades. Recently, the emergence of new types of highly efficient miniaturized power generators like micro fuel cells has opened up alternatives for continuous operation on the basis of unlimited fuel feeding. This work addresses for the first time the development of a full ceramic micro solid oxide fuel cell fabricated in silicon technology. This full-ceramic device represents a new generation of miniaturized power generators able to operate at high temperatures, and therefore able to work with a hydrocarbon fuel supply. Dense yttria-stabilized zirconia free-standing large-area membranes on micromachined silicon were used as the electrolyte. Thin-film porous electrodes of La0.6Sr0.4CoO3-δ and gadolinia-doped ceria were employed as cathode and anode materials, respectively. The electrochemical performance of all the components was evaluated by partial characterization using symmetrical cells, yielding excellent performance for the electrolyte (area specific resistance of 0.15 Ω cm2 at temperatures as low as 450 °C) and the electrodes (area specific resistance of the cathode and anode below 0.3 Ω cm2 at 700 °C). A micro solid oxide fuel cell with an active area of 2 mm2 and less than 1 micrometer in thickness was characterized under fuel cell conditions, using hydrogen as a fuel and air as an oxidant. A maximum power density of 100 mW cm-2 and 2 mW per single membrane was generated at 750 °C, having an open circuit voltage of 1.05 V. Impedance spectroscopy of the all-ceramic membrane showed a total area-specific resistance of ∼3.5 Ω cm2., Peer reviewed