Pasar al contenido principal

Valorización de residuos agroindustriales para aplicaciones alimentarias

JDC2022-048795-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Valorisation of Ulva spp. green seaweed and its residues from pressurized hot water extraction: A comparative study of casting and melt-compounding techniques for film production

  • Sanz Llorens, Vanesa
  • Baltrusch Montero, Kai Lois
  • Torres Pérez, María Dolores
  • Domínguez González, Herminia
  • Fabra, María José
  • López Rubio, Amparo
This study investigates the valorisation of Ulva spp. biomass after Autohydrolysis (AH) extraction performed at 120–200 ◦C as feedstock for biopolymer films, providing the first comparative assessment of casting and meltcompounding techniques. Compositional analysis confirmed that the biomass contained carbohydrates (27–36 %, with 4–24 % of cellulose), proteins (11–26 %) and ashes (10–42 %). The seaweed biomass also contained phenolic compounds (12–64 mg Gallic Acid Equivalents (GAE)/g sample), which exhibited antioxidant properties (5–11 mg Trolox Equivalent Antioxidant Capacity (TEAC)/g sample). Lower molecular weights were observed with increasing AH temperature, indicating partial depolymerization of the macromolecules. Films were characterized using Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and X-Ray Diffraction (XRD), together with mechanical and waterbarrier properties. The casting method produced continuous, slightly transparent films with Internal Transmittance (Ti) values of 1–40 %, higher stiffness (Young’s Modulus, E: 399.83–1852.85 MPa), lower flexibility (Elongation at Break, εb: 1.34–12.28 %), low Water Vapor Permeability (WVP: 1.53–2.28 × 10− 10 g m⋅Pa− 1 ⋅s − 1 ⋅m− 2 ) and moderate hydrophilicity (contact angle: 57.95◦–65.60◦). Melt-compounding films were opaque, more homogeneous films with lower stiffness but, in some cases, greater extensibility (εb: 1.31–13.33 %), higher WVP (7.31–9.12 × 10− 10 g m⋅Pa− 1 ⋅s − 1 ⋅m− 2 ) and increased hydrophilicity (contact angle: 23–44◦). Thermal–mechanical processing also influenced molecular organization and the distribution of hydrophilic groups. Overall, this study demonstrates, for the first time, that AH residues derived from Ulva spp. can be transformed into bio-based films with tunable structural, mechanical, and barrier properties., Agencia Estatal de Investigación | Ref. JDC2022-048795-I, Agencia Estatal de Investigación | Ref. PID2022-138328OB-C21, Agencia Estatal de Investigación | Ref. PID2021-124017-B-I00, Agencia Estatal de Investigación | Ref. CEX2021-001189-S
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Marine-derived antimicrobial extracts from Ulva spp. obtained by autohydrolysis for 3D-printed applications

  • Bernabeu, Manuel
  • Torres Pérez, María Dolores
  • Fabra, María José
  • Domínguez González, Herminia
  • Collado, Maria Carmen
  • López Rubio, Amparo
  • Sanz Llorens, Vanesa
The increasing prevalence of antibiotic-resistant bacteria underscores the urgent need for sustainable antimicrobial alternatives. In this study, Ulva spp. biomass was valorized through autohydrolysis (AH) up to 160 ◦C as a green extraction technology to recover bioactive compounds without chemical additives. The obtained aqueous (AF) and ethanol-precipitated (AFP) fractions were characterized in terms of composition, antioxidant capacity, molecular weight distribution, and biological activity. The AF and AFP extracts showed high carbohydrate content (AF: 39.62%; AFP: 56.07% dw), mainly rhamnose and uronic acids, as well as significant mineral richness (Na and K > 15 mg/g). Total phenolic content and antioxidant capacity were higher in AF (4.19 mg GAE/g; 6.14 mg TEAC/g) than in AFP (2.92 mg GAE/g; 1.95 mg TEAC/g), whereas molecular weight analysis revealed a predominance of medium-sized species (1–100 kDa) in AF and larger compounds (>100 kDa) in AFP. Both extracts inhibited the growth of Staphylococcus aureus and Escherichia coli. Correlation analysis revealed strain-dependent relationships between antimicrobial activity and extract composition, whereas no effects were observed on potential probiotic Lactobacillus and Bifidobacterium strains under the tested conditions. The incorporation of AF and AFP into ulvan-based 3D-printed hydrogels yielded printable and mechanically stable materials (G′ > G″), exhibiting adequate viscoelastic properties and no water release after four weeks of storage. These findings demonstrate, for the first time, the feasibility of coupling AH extraction with additive manufacturing to develop multifunctional marine-derived materials combining antimicrobial potential and structural stability, in accordance with the principles of green chemistry and circular bioeconomy., Agencia Estatal de Investigación | Ref. JDC2022-048795-I, Agencia Estatal de Investigación | Ref. RYC2024-050318-I, Agencia Estatal de Investigación | Ref. PID2022-138328OB-C21, Agencia Estatal de Investigación | Ref. PID2021-124017OB-I00, Generalitat Valenciana, Agencia Estatal de Investigación | Ref. EX2021-001189-S
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From waste to resource: Production and characterisation of protein-enriched extracts from Gelidium corneum residue

  • Molina-Gilarranz, Irene
  • Cebrián-Lloret, Vera
  • Correa, Yubexi
  • Sanz, Vanesa
  • López-Sánchez, Patricia
  • López-Rubio, Amparo
  • Recio, Isidra
  • Martínez Sanz, Marta
16 pages, 2 tables, 8 figures.-- Data will be made available on request, This study aimed to develop protocols for extracting proteins from Gelidium corneum agar-extraction residue for their potential use in food-related applications. The residue was mostly composed of carbohydrates (41%), forming highly recalcitrant cell wall structures that hindered protein extraction through alkaline solubilisation. The application of high-pressure (350 MPa, 5 min, 20 °C) and ultrasound (10 min) pre-treatments did not induce significant microstructural changes in the biomass, but promoted the release of highly soluble proteins and peptides, increasing the protein extraction yields up to 10%, although the protein concentration in the extracts was not significantly improved. In contrast, the application of enzymatic hydrolysis combining carbohydrases (Vertera® Release) and proteases (Pancreatin) increased the extraction yield to 25% and concentrated the protein from 27% to 39%. While the native residue showed a very low protein digestibility (20%), this was significantly increased in all the extracts (around 80–85%). Overall, the enzymatic treatment proved to be the most promising strategy since it provided the highest extraction yields and the highest nutritional quality proteins, with a relatively high proxy Digestible Indispensable Amino Acid Score (DIAAS) value of 72. These results show the possibility of valorising the Gelidium corneum agar-extraction residue through alternative strategies for the production of extracts with high nutritional quality proteins, This research work was financially supported by the grant PID2022138328OBC22, funded by MCIN/AEI/10.13039/501100011033 and by FEDER/UE. Irene Molina Gilarranz was supported by a predoctoral fellowship funded by the Consejeria de Educación Ciencia y Universidades from the Comunidad de Madrid (PIPF-2023/BIO-30193). Vanesa Sanz gratefully acknowledges support from a postdoctoral fellowship (JDC2022-048795-I) financed by MCIN/AEI/10.13039/501100011033 and co-funded by the European Union through the NextGenerationEU/PRTR program, Peer reviewed