Pasar al contenido principal

Optimizing SnSe-based Thermoelectric Generators for Cost-Effective Waste Heat Recovery

JDC2023-050703-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric performance in Fe2V0.8W0.2Al thin films: synergistic effects of chemical ordering and tungsten substitution

  • Domínguez-Vázquez, José María
  • Tenaguillo Arrese, Miguel Ángel
  • Lohani, Ketan
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Plata, José J.
  • Márquez, Antonio M.
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
We systematically investigate the combined effect of chemical ordering and W substitution on the thermoelectric properties of Fe2V0.8W0.2Al thin films. Through controlled sputter deposition on MgO (100) and Al2O3 (112̄0) substrates at temperatures ranging from 350 °C to 950 °C, we achieve varying degrees of crystalline and chemical order. Films deposited between 750 °C and 950 °C adopt the highly ordered L21 phase, exhibiting a dramatic enhancement in Seebeck coefficient and substantial reduction in thermal conductivity compared to isostructural Fe2VAl thin films without tungsten substitution. These synergistic improvements, attributed to electronic structure modifications and enhanced phonon scattering mechanisms, yield exceptional thermoelectric performance with maximum power factors of 730 ± 70 µW m-1 K-2 and figure of merit zT = 0.12 ± 0.03 at room temperature, representing a more than four-fold enhancement over undoped Fe2VAl and demonstrating the potential for sustainable energy harvesting applications., The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 Founded by European Research Council (ERC), grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We thankfully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputación, RES (QHS-2023-1-0028) and Albaicín (Centro de Servicios de Informática y Redes de Comunicaciones - CSIRC, Universidad de Granada). KL acknowledges Aid JDC2023-050703-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced thermoelectric performance in Fe2V0.8W0.2Al thin films: synergistic effects of chemical ordering and tungsten substitution [DATASET]

  • Domínguez-Vázquez, José María
  • Tenaguillo Arrese, Miguel Ángel
  • Lohani, Ketan
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Plata, José J.
  • Márquez, Antonio M.
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
This is the Dataset from the study in which we systematically investigate the combined effect of chemical ordering and W substitution on the thermoelectric properties of Fe2V0.8W0.2Al thin films. Through controlled sputter deposition on MgO (100) and Al2O3 (11[2 with combining macron]0) substrates at temperatures ranging from 350 °C to 950 °C, we achieve varying degrees of crystalline and chemical order. Films deposited between 750 °C and 950 °C adopt the highly ordered L21 phase, exhibiting a dramatic enhancement in Seebeck coefficient and substantial reduction in thermal conductivity compared to isostructural Fe2VAl thin films without tungsten substitution. These synergistic improvements, attributed to electronic structure modifications and enhanced phonon scattering mechanisms, yield exceptional thermoelectric performance with maximum power factors of 730 ± 70 µW m−1 K−2 and figure of merit zT = 0.12 ± 0.03 at room temperature, representing a more than four-fold enhancement over undoped Fe2VAl and demonstrating the potential for sustainable energy harvesting applications, The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from CM (project SpaceTec, S2013/ICE2822), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 Founded by European Research Council (ERC), grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We thankfully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputación, RES (QHS-2023-1-0028) and Albaicín (Centro de Servicios de Informática y Redes de Comunicaciones - CSIRC, Universidad de Granada). KL acknowledges Aid JDC2023-050703-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High thermoelectric performance at room temperature in electrodeposited Ag2Se and Cu2Se films via microstructural control

  • Pérez Picazo, Elena
  • Tenaguillo Arrese, Miguel Ángel
  • Lohani, Ketan
  • Martín-González, Marisol
  • Manzano, Cristina V.
Electrodeposited silver selenide (Ag2Se) and copper selenide (Cu2Se) films are explored as scalable thermoelectric materials at room temperature (RT). The study focuses on the relationship between growth conditions, microstructure, and transport properties. For Ag2Se, a maximum in-plane power factor (PF) of 7655 ± 1578 μW m−1 K−2 is achieved, placing this material among the highest-performing n-type thermoelectrics at RT in terms of PF. The optimized films (Ag1.92Se) exhibit a dense granular morphology, strong (200) orthorhombic orientation, and minimal secondary phases; with an out-of-plane thermal conductivity (k) of 0.79 ± 0.16 W m−1 K−1. For Cu2Se, a maximum in-plane PF of 1130 ± 233 μW m−1 K−2 is obtained at RT, representing a five-fold improvement over previous electrodeposited Cu2Se films and approaching the highest values reported via vacuum-based methods. The optimized composition (Cu1.88Se) shows compact elongated grains and a predominantly cubic structure with (111) orientation; with an out-of-plane k of 0.89 ± 0.18 W m−1 K−1 at RT. The optimized materials were further integrated into a prototype π-type thermoelectric generator, delivering a maximum power density of 8.5 W m−2 under a temperature gradient of 12 K. These results establish electrodeposition as a simple and scalable platform for tuning microstructure and transport properties in chalcogenide films, yielding competitive thermoelectric performance at RT., We acknowledge financial support from “ERC Consolidator Grant No. 101087974 COOLed”. KL acknowledges Aid JDC2023-050703-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+. We acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQ (C2021)-006944-P). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

High thermoelectric performance at room temperature in electrodeposited Ag2Se and Cu2Se films via microstructural control [Dataset]

  • Pérez-Picazo, Elena
  • Tenaguillo, Miguel Ángel
  • Lohani, Ketan
  • Martín-González, Marisol
  • Manzano, Cristina V.
Electrodeposited silver selenide (Ag2Se) and copper selenide (Cu2Se) films are explored as scalable thermoelectric materials at room temperature (RT). The Dataset is from the study which focuses on the relationship between growth conditions, microstructure, and transport properties. For Ag2Se, a maximum in-plane power factor (PF) of 7655 ± 1578 μW m−1 K−2 is achieved, placing this material among the highest-performing n-type thermoelectrics at RT in terms of PF. The optimized films (Ag1.92Se) exhibit a dense granular morphology, strong (200) orthorhombic orientation, and minimal secondary phases; with an out-of-plane thermal conductivity (k) of 0.79 ± 0.16 W m−1 K−1. For Cu2Se, a maximum in-plane PF of 1130 ± 233 μW m−1 K−2 is obtained at RT, representing a five-fold improvement over previous electrodeposited Cu2Se films and approaching the highest values reported via vacuum-based methods. The optimized composition (Cu1.88Se) shows compact elongated grains and a predominantly cubic structure with (111) orientation; with an out-of-plane k of 0.89 ± 0.18 W m−1 K−1 at RT. The optimized materials were further integrated into a prototype π-type thermoelectric generator, delivering a maximum power density of 8.5 W m−2 under a temperature gradient of 12 K. These results establish electrodeposition as a simple and scalable platform for tuning microstructure and transport properties in chalcogenide films, yielding competitive thermoelectric performance at RT., We acknowledge financial support from “ERC Consolidator Grant No. 101087974 COOLed”. KL acknowledges Aid JDC2023-050703-I funded by MICIU/AEI/10.13039/501100011033 and by the ESF+. We acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQ (C2021)-006944-P). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed