Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of morphotropic phase boundary displacement in lead-free (Bi(0.5)Na(0.5))(1-x)Ba(x)TiO(3) polycrystalline thin films.

  • Bretos, Íñigo
  • Alonso-San-José, David
  • Jiménez, Ricardo
  • Ricote, J.
  • Calzada, M. L.
[EN] Lead-free (Bi0.5Na0.5)1-xBaxTiO3 (BNBT) thin films with compositions at x = 0.055, 0.100, and 0.150 were prepared by chemical solution deposition on Pt/TiO2/SiO2/(100)Si substrates. The dielectric behavior of the films was studied, and the ferroelectricantiferroelectric phase transition observed was used to situate the morphotropic phase boundary (MPB) for compositions with x ~0.100 (BNBT-10), a value that differs from that reported for bulk materials (BNBT-5.5). Extrinsic effects derived from the thin-film configuration (e.g., microstrains, residual stresses) may be responsible for the shift of the MPB. Consequently, the dielectric permittivity is significantly improved for this composition, showing the best ferroelectric response obtained up to now for films of the BNBT system (Pr = 13.0 µC/cm2, Ec = 70 kV/cm)., This work was financed by Spanish Projects MAT2007-61409 and MAT2010-15365. I.B. acknowledges the support of the JAE-Doc (CSIC) program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead-free ferroelectric (Na1/2Bi1/2)TiO 3-BaTiO3 thin films in the morphotropic phase boundary composition: Solution processing and properties

  • Alonso-San-José, David
  • Jiménez, Ricardo
  • Bretos, Íñigo
  • Calzada, M. L.
[EN] Ferroelectric (Na1/2Bi1/2)TiO3-BaTiO 3 (BNT-BT) single perovskite thin films have been prepared, for the first time, by chemical solution deposition onto Pt/TiO2/SiO 2/(100)Si substrates. A solution process has been developed for the preparation of precursor solutions. The handling of all the chemical reagents, refluxes, and distillations was carried out in air. In addition, the resulting solutions are stable in air, presenting a low gelation and trend to the formation of precipitate. Solutions containing a 10 mol% of Na excess, and a 10 mol% excess of Na+10 mol% excess of Bi, were prepared. These solutions were spin-coated onto the substrates, obtaining amorphous layers that were crystallized in O2 by rapid thermal processing. Multiple deposition and crystallization were carried out to grow crystalline films with a thickness between 125 and 140 nm. At temperatures below 600°C, the perovskite phase coexists with a pyrochlore phase. At temperatures over 700°C or soaking times over 60 s, an interdiffusion substrate/film interface is formed. Single perovskite BNT-BT thin films are obtained at 650°C, with soaking times of only 6 s. There is an effect of the Na excess and Na+Bi excess on the film microstructure and the dielectric/ferroelectric properties. The films containing Na+Bi excess have a larger grain size, higher dielectric permittivities (at room temperature K′∼400), and higher saturation and polarization values (Ps∼23 μC/cm2 and Pr∼12 μC/cm2). The results of this work prove the feasibility of preparing these lead-free compositions in thin film form, resulting in materials with promising functional properties when integrated with Si semiconductor substrates. © 2009 The American Ceramic Society., This work has been supported by the Spanish Project MAT2007-61409.