Pasar al contenido principal

DESARROLLO Y CARACTERIZACION DE NANOADITIVOS REFORZANTES, ANTIMICROBIANOS Y BIOACTIVOS Y DE SUS NANOCOMPUESTOS CON BIOPOLIESTERES DE INTERES EN APLICACIONES DE ENCAPSULADO Y ENVASES ALIMENTARIOS

MAT2009-14533-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of electrospun polylactide-based ultrathin fibers for osteoconductive bone scaffolds

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Gimeno-Alcañiz, Jose V.
  • Ocio, Maria J.
  • Lagaron, Jose M.
[EN] Bone tissue interfacial scaffolds, which encourage cell growth, are critical determinants for clinical success after implant surgery. Over the years, a number of resorbable configurations have emerged for bone cell support and growth, but only a few have demonstrated clinical efficacy. Polymer coatings produced by electrospinning are regarded as very promising bone interfaces because of the ultrathin-scaled dimensions of its physical structure. In this study, the morphology, composition, thermal properties, and cell growth viability of a number of polylactide-based systems containing different binary and ternary formulations of this biomaterial with collagen and commercial hydroxyapatite nanoparticles were characterized. The best performance in terms of biocompatibility was obtained for the tricomponent system in which the submicron fibers were further subjected to uniaxial orientation process during formation. The in vitro proliferation of the cells, which harbored on these ultrathin-structured mats, was examined by means of a metabolic activity indicator and ensured by means of scanning electron microscopy, and cell anchorage was checked by fluorescent optical microscopy. Finally, the optimum tricomponent material was successfully sterilized for the first time by gamma radiation without noticeable losses in cell-seeding capacity.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zein-based ultrathin fibers containing ceramic nanofillers obtained by electrospinning. I. Morphology and thermal properties

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Lagaron, Jose M.
[EN] This work presents the first results on the development and characterization of novel nanobiocomposite fibers prepared by electrospinning of zein/clay mixtures (from 99/1 to 75/25 wt/wt) from ethanol-based solutions. To do so, commercial ceramic materials of different nature, such as organomodified and unmodified mica, kaolinite, montmorillonite, and zeolite were employed and compared. A significant decrease in fiber diameter was observed as the clay fraction increased in the hybrid material. The highest clay contents also produced fibers but with extended beaded regions. All fillers nanodispersed well in the fibers at low loadings but unmodified mica particles were also seen excluded from the fibers, most likely due to excessive size. Surprisingly, the ceramic laminar structures, i.e. the phyllosilicates, were all seen to embed within the ultrathin fibers in what appears as an unreported rolled morphology due to the extensional forces generated by the electrospinning process. Electrospun nanobiocomposite fibers with optimal ceramic nanoparticle contents are currently investigated as an adequate procedure to prepare naturally occurring composite additives, coatings, and interlayers with enhanced performance in terms of mechanical, thermal, barrier, and control release properties for packaging, active packaging, biomedical, and pharmaceutical applications., Contract grant sponsor: MEC; contract grant numbers: MAT2009-14533-C02-01, MAT2006-10261-C03. Contract grant sponsor: EU FP6, NEWBONE
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and Characterization of Silver-Based Antimicrobial Ethylene-Vinyl Alcohol Copolymer (EVOH) Films for Food-Packaging Applications

  • Martínez-Abad, Antonio
  • Lagarón, José María
  • Ocio, María José
“This document is the Accepted Manuscript version of a Published Work that appeared in final form in Journal of Agricultural and Food Chemistry, copyright © 2012 American Chemical Society after peer review and technical editing by t he publisher. To access the final edited and published work see http://dx.doi.org/10.1021/jf300334z.", The use of silver as an antimicrobial in the food area has raised wide interest in recent years. In the present work, 0.001–10 wt % silver ions was satisfactorily incorporated into an ethylene–vinyl alcohol (EVOH) copolymer matrix by a solvent casting technique. The antibacterial efficacy of the composite was evaluated under laboratory conditions and in contact with some foods. The ionic compound did not affect the crystallinity or the water-induced plasticization of the materials and was homogeneously distributed across the surface and thickness of the films. When immersed in water, sorption-induced release of 50–100% of the silver ions took place in <30 min. In the bacterial minimal growth medium M9, the minimal inhibitory concentration (MIC) of the film was in the range of 0.01–0.1 ppm. High protein content food samples displayed low susceptibility to the films (<1 log reduction in any case), whereas low protein content food samples exhibited no detectable bacterial counts for films with 1 and 10 wt % silver and about 2 log reduction for films with 0.1 wt % silver. These results represent a step forward in the understanding of silver antimicrobial efficacy and its possible application in the food-packaging industry, most likely as food coatings., The authors would like to thank the Spanish MICINN (Projects MAT2009-14533-C02-01 and EUI2008-00182) for financial support. A. Martinez-Abad thanks the Spanish Research Council (CSIC) for financial support under grant JAEPre-092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the different growth conditions affecting silver antimicrobial efficacy on Listeria monocytogenes and Salmonella enterica

  • Martínez-Abad, Antonio
  • Sánchez Moragas, Gloria
  • Lagarón, José María
  • Ocio, María José
Silver is known to inhibit microorganisms and therefore it is an ideal candidate for its incorporation in a wide variety of materials for food applications. However, there is still a need for understanding how silver prolonged exposure to bacterial contamination affects the bioavailability of the active silver species. In the present study, growth curves of Listeria monocytogenes and Salmonella enterica were performed for 3-5. days in Tryptic Soy Broth (TSB) and M9 minimal medium (M9) in the presence of silver ions and silver solutions previously in contact with the growth media. The cultivability of the bacteria under these conditions was correlated with the viability of the bacterial populations as measured by flow cytometry analysis (FC) using a LIVE/DEAD BacLight kit. It was found that, after a period where viable counts were not detected, bacterial populations recovered and were able to proliferate in most cases. The resuscitation of the cultures was explained by both the existence of a resilient fraction of bacteria in a compromised state and the parallel inactivation of the silver species. This inactivation was found to be highly influenced by time dependant chemical reactions taking place in the environment of exposure, producing differences of at least 3 fold between results for nutrient rich environments and results for limiting environments. This study points out the need for understanding these chemical interactions and bacterial mechanisms of adaptation and may have relevance in the design of silver-based antimicrobial systems for food-related applications. © 2012 Elsevier B.V., The authors would like to thank M.J. Segui for technical support with FC data analysis and the Spanish MICINN (Project MAT2009-14533-C02-01, and EUI2008-00182) for financial support. A. Martinez-Abad was supported by the Spanish Council for Scientific Research (CSIC) under grant JAE-Pre092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of speciation in the release profiles and antimicrobial performance of electrospun ethylene vinyl alcohol copolymer (EVOH) fibers containing ionic silver ions and silver nanoparticles

  • Martínez-Abad, Antonio
  • Sánchez Moragas, Gloria
  • Lagaroón, José María
  • Ocio, María José
This version of the article has been accepted for publication, after peer review and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: http://dx.doi.org/10.1007/s00396-012-2870-0 LICENCIA:https://www.springernature.com/gp/open-research/policies/accepted-manuscript-terms, In the present study, tailor-made ethylene vinyl alcohol copolymer (EVOH) fibers containing different amounts of antimicrobial silver ions and nanoparticles were developed by electrospinning and subsequent thermal annealing. The morphology of the fibers was examined by scanning and transmission electron microscopy and thermal properties were characterized by differential scanning calorimetry. Speciation and controlled release of silver from the fibers was monitored by anodic stripping voltammetry and energy dispersive X-ray spectroscopy. Before aging, 100 % of the silver recovered from the electrospun structures was in ionic form to be instantly released in contact with moisture with varying temperature-dependent kinetics. Thermal annealing of the fibers at 100 C for 1, 2, and 4 days prompted the gradual transformation of 70, 93-94, and 98-99 % of the total silver into nanoparticles homogeneously distributed along the fibers, which were mostly retained within them, producing a substantial decrease in their release capacity. Speciation and release profiles from the fibers were correlated with their antibacterial performance against Listeria monocytogenes and Salmonella enteric. This study is a step forward in the understanding of silver-based electrospun antimicrobial polymers and puts forth the suitability of EVOH for the development of targeted delivery systems in a number of applications. © 2012 Springer-Verlag Berlin Heidelberg., The authors would like to thank the Spanish MICINN (project MAT2009-14533-C02-01) for financial support. A. Martinez-Abad thanks the Spanish Research Council (CSIC) for financial support under grant JAEPre-092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligands affecting silver antimicrobial efficacy on Listeria monocytogenes and Salmonella enterica

  • Martínez-Abad, Antonio
  • Sánchez Moragas, Gloria
  • Lagarón, José María
  • Ocio, María José
Although silver is being extensively used in food or other applications as the key component to control microbial proliferation, many factors affecting its real potential are still unknown. In the present work, the presence of specific ligands or the contents in organic matter was correlated with silver speciation and its antibacterial performance. Silver was found to be only active in form of free silver ions (FSI). The presence of chloride ions produced an equilibrium of stable silver chloride complexes which were void of antimicrobial efficacy. However, even at relatively high concentrations of chlorides, a small fraction of FSI may still be present, producing a bactericidal effect with concentrations at the nanomolar level under optimum conditions. Low concentrations of thiol groups completely inactivated silver, while methylsulphur groups only affected its efficacy at very high concentrations. Antibacterial performance revealed differences of about 1000-fold between results for environments with high organic matter content and results for aqueous salt buffers. Thiol groups were nonetheless not found directly associated with the decrease in antimicrobial performance in a nutrient rich environment. These results point out the complexity of the antimicrobial systems based on silver and can have relevance in food or other applications of silver as an antimicrobial., The authors would like to thank the Spanish MICINN (Project MAT2009-14533-C02-01) for financial support. A. Martínez-Abad was supported by the Spanish Council for Scientific Research (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial performance of solvent cast polycaprolactone (PCL) films containing essential oils

  • Martínez-Abad, Antonio
  • Sánchez Moragas, Gloria
  • Fuster, V.
  • Lagarón, José María
  • Ocio, María José
The increase of consumer demand for higher quality and longer shelf-life in foods, while reducing the use of non-compostable packaging materials, has encouraged research on biopolymers incorporating natural antimicrobial compounds. Cinnamaldehyde (CNMA) and allyl isothiocyanate (AITC) were incorporated into polycaprolactone (PCL) films by solvent casting. The release study was carried out by means of ATR and transmission FTIR spectroscopy and showed high volatility of the essential oils during the film forming process. While only negligible quantities of AITC were retained in the polymer matrix after film curing, the release of CNMA was prolonged for at least 50h at room temperature. PCL films incorporating 10wt.-% and 20wt.-% CNMA were further investigated using both a macrodilution technique and a vapour diffusion technique. MICs against Salmonella enterica, and Listeria monocytogenes in the liquid phase were determined to be 5.87 and 4.49mM, for films containing 10 and 20wt.-% of CNMA with regard to the polymer in solution. The influence of relative humidity (RH) and temperature on the antimicrobial performance of the active films was investigated in the vapour phase. RH was not found to play a key role in the release and antimicrobial performance of the films, while decreasing temperatures resulted in a considerable increase in the antimicrobial effect. In a sealed environment, a concentration of less than 5.34mg CNMA/L air from PCL with 20wt.-% CNMA was able to cause complete inhibition of bacterial growth at 4°C and 10°C during at least 30 days. These results suggest that the combination of cold storage with biodegradable polyesters incorporating CNMA or other EOs could be an interesting approach in active packaging technologies. © 2013 Elsevier Ltd., The authors would like to thank the Spanish MICINN (Project MAT2009-14533-C02-01) for financial support. A. Martinez-Abad thanks the Spanish Research Council (CSIC) for financial support under grant JAEPre-092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of silver-infused polylactide films for inactivation of Salmonella and feline calicivirus in vitro and on fresh-cut vegetables

  • Martínez-Abad, Antonio
  • Ocio, María José
  • Lagarón, José María
  • Sánchez Moragas, Gloria
There is a growing trend to develop packaging materials with an active role in guarantying that the quality and safety characteristics of packaged products will remain or improve from preparation throughout shelf-life. In the present study, 0.001-1.0 wt.% silver ions were satisfactorily incorporated into polylactide (PLA) films by a solvent casting technique. Silver migration from the films was measured by voltamperometry and then correlated with its antimicrobial efficacy against Salmonella enterica and feline calicivirus (FCV), a human norovirus surrogate, by using the Japanese industrial standard (JIS Z 2801). The PLA-silver films showed strong antibacterial and antiviral activity in vitro, with increasing effects at higher silver concentrations. Moreover, results show that FCV was less susceptible to silver than Salmonella. When films were applied on food samples, antibacterial and antiviral activity was reduced as compared to in vitro. Antimicrobial activity was very much dependent on the food type and temperature. In lettuce samples incubated at 4 °C during 6 days, 4 log CFU of Salmonella was inactivated for films with 1.0 wt.% and no infectious FCV was reported under the same conditions. On paprika samples, no antiviral effect was seen on FCV infectivity whereas films showed less antibacterial activity on Salmonella., The authors would like to thank the Spanish MICINN (projects MAT2009-14533-C02-01 and CSD2007-000063) for the financial support. A. Martínez-Abad thanks the Spanish Research Council (CSIC) for the financial support under grant JAEPre-092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled delivery of gentamicin antibiotic from bioactive electrospun polylactide-based ultrathin fibers

  • Torres Giner, Sergio
  • Martínez-Abad, Antonio
  • Gimeno Alcañiz, José Vicente
  • Ocio, María José
  • Lagarón, José María
The purpose of this study was to generate ultrathin fibers based on polylactide (PLA) biopolyester with antimicrobial controlled release capacity to treat bacterial infections. To achieve this objective, gentamicin antibiotic was encapsulated into pure PLA fibers, a blend of PLA-collagen and coaxial fibers containing a skin of PLA and a core of collagen using the electrospinning technique. The morphology of the gentamicin-loaded fibers and the antibiotic distribution within the fibers were examined by SEM and TEM. The drug delivery profile of the different electrospun fibers was analyzed using a spectrophotometric method. The performance for treating common possible post-surgical infections was investigated against Staphylococcus epidermis, Pseudomonas aeruginosa and Escherichia coli. The morphology of the electrospun fibers as well as the hydrophilicity of the polymer blends ultimately determined the antibiotic release characteristics. The results indicated that such drug-loaded fibers can serve as advanced delivery platforms with strong and timing controllable antibacterial properties. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., The authors would like to thank the MEC (Projects: MAT2009-14533-C02-01 and MAT2006-10261-C03) and the EU FP6, NEWBONE project for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilization of a nutraceutical omega-3 fatty acid by encapsulation in ultrathin electrosprayed zein prolamine

  • Torres Giner, Sergio
  • Martínez-Abad, Antonio
  • Ocio, María José
  • Lagarón, José María
Docosahexaenoic acid (DHA) is a long chain polyunsaturated fatty acid of the omega-3 series (omega-3), which exerts strong positive influences on human health. The target of this study was the stabilization by encapsulation of this bioactive ingredient in zein ultrathin capsules produced by electrospraying. The zein ultrathin DHA encapsulation was observed by ATR-FTIR spectroscopy to be more efficient against degradation under both ambient conditions and in a confined space (so-called headspace experiment). In the latter case, that more closely simulates a sealed food packaging situation, the bioactive DHA was considerably more stable. By fitting the degradation data to a specific auto-decomposition food lipids kinetic model, it was seen that the encapsulated omega-3 fatty acid showed a 2.5-fold reduction in the degradation rate constant and also had much higher degradation induction time. Moreover, the ultrathin zein-DHA capsules resulted to be more stable across relative humidity and temperature. Finally, headspace analysis by gas chromatography coupled with mass spectrometry showed that the presence of 3 main flavor-influencing aldehydes in the headspace was much lower in the zein encapsulated DHA, suggesting that the encapsulated bioactive also releases much less off-flavors. Electrosprayed ultrathin capsules of zein are shown to exhibit potential in the design of novel functional foods or bioactive packaging strategies to enhance the stability of functional ingredients. Practical Application: This article presents a novel methodology for the stabilization by encapsulation of omega 3 nutraceuticals via electrospraying and has potential application in the development of functional foods., The authors would like to acknowledge the MICINN (projects MAT2009-14533-C02-01 and MAT2006-10261-C03) and the CONSOLIDER project FUN-C-FOOD (CSD2007-00063) for financial support., Peer reviewed