Pasar al contenido principal

APLICACION DE LA MICROSCOPIA ELECTRONICA EN EL DESARROLLO DE NANOESTRUCTURAS SEMICONDUCTORAS DE ALTA CALIDAD: PUNTOS Y NANOHILOS CUANTICOS

MAT2010-15206

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE CADIZ
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Influence of substrate crystallography on the room temperature synthesis of AlN thin films by reactive sputtering

  • Iriarte, Gonzalo F
  • Fernández de los Reyes, Daniel
  • González Robledo, David
  • Rodriguez, J.G.
  • García Roja, Rafael
  • Calle, F.
A pulsed DC reactive ion beam sputtering system has been used to synthesize aluminium nitride (AlN) thin films at room temperature by reactive sputtering. After systematic study of the processing variables, high-quality polycrystalline films with preferred c-axis orientation have been grown successfully on silicon and Au/Si substrates with an Al target under a N 2 /(N 2 + Ar) gas flow ratio of 55%, 2 mTorr processing pressure and keeping the temperature of the substrate holder at room temperature. The crystalline quality of the AlN layer as well as the influence of the substrate crystallography on the AlN orientation has been characterized by high-resolution X-ray diffraction (HR-XRD). Best ω-FWHM (Full Width at Half Maximum) values of the (0 0 0 2) reflection rocking curve in the 1 μm thick AlN layers are 1.3°. Atomic Force Microscopy (AFM) measurements have been used to study the surface morphology of the AlN layer and Transmission Electron Microscopy (TEM) measurements to investigate the AlN/substrate interaction. AlN grew off-axis from the Si substrate but on-axis to the surface normal. When the AlN thin film is deposited on top of an Au layer, it grows along the [0 0 0 1] direction but showing a two-domain structure with two in-plane orientations rotated 30° between them. © 2011 Elsevier B.V. All rights reserved.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Impact of N on the atomic-scale Sb distribution in quaternary GaAsSbN-capped InAs quantum dots

  • Fernández de los Reyes, Daniel
  • González Robledo, David
  • Ulloa, J.M.
  • Sales Lérida, David
  • Domínguez, Lara
  • Mayoral, Álvaro
  • Hierro, Adrian
The use of GaAsSbN capping layers on InAs/GaAs quantum dots (QDs) has recently been proposed for micro- and optoelectronic applications for their ability to independently tailor electron and hole confinement potentials. However, there is a lack of knowledge about the structural and compositional changes associated with the process of simultaneous Sb and N incorporation. In the present work, we have characterized using transmission electron microscopy techniques the effects of adding N in the GaAsSb/InAs/GaAs QD system. Firstly, strain maps of the regions away from the InAs QDs had revealed a huge reduction of the strain fields with the N incorporation but a higher inhomogeneity, which points to a composition modulation enhancement with the presence of Sb-rich and Sb-poor regions in the range of a few nanometers. On the other hand, the average strain in the QDs and surroundings is also similar in both cases. It could be explained by the accumulation of Sb above the QDs, compensating the tensile strain induced by the N incorporation together with an In-Ga intermixing inhibition. Indeed, compositional maps of column resolution from aberration-corrected Z-contrast images confirmed that the addition of N enhances the preferential deposition of Sb above the InAs QD, giving rise to an undulation of the growth front. As an outcome, the strong redshift in the photoluminescence spectrum of the GaAsSbN sample cannot be attributed only to the N-related reduction of the conduction band offset but also to an enhancement of the effect of Sb on the QD band structure.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Bismuth incorporation and the role of ordering in GaAsBi/GaAs structures

  • Fernández de los Reyes, Daniel
  • Bastiman, Faebian
  • Hunter, Chris J.
  • Sales Lérida, David
  • Sánchez, Ana M.
  • John P.R., David
  • González Robledo, David
The structure and composition of single GaAsBi/GaAs epilayers grown by molecular beam epitaxy were investigated by optical and transmission electron microscopy techniques. Firstly, the GaAsBi layers exhibit two distinct regions and a varying Bi composition profile in the growth direction. In the lower (25 nm) region, the Bi content decays exponentially from an initial maximum value, while the upper region comprises an almost constant Bi content until the end of the layer. Secondly, despite the relatively low Bi content, CuPtB-type ordering was observed both in electron diffraction patterns and in fast Fourier transform reconstructions from high-resolution transmission electron microscopy images. The estimation of the long-range ordering parameter and the development of ordering maps by using geometrical phase algorithms indicate a direct connection between the solubility of Bi and the amount of ordering. The occurrence of both phase separation and atomic ordering has a significant effect on the optical properties of these layers. © 2014 Reyes et al.; licensee Springer.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

High efficient luminescence in type-II GaAsSb-capped InAs quantum dots upon annealing

  • Ulloa, J. M.
  • LLorens, J.M.
  • Alén, B.
  • Fernández de los Reyes, Daniel
  • Sales Lérida, David
  • González Robledo, David
  • Hierro, A.
The photoluminescence efficiency of GaAsSb-capped InAs/GaAs type II quantum dots (QDs) can be greatly enhanced by rapid thermal annealing while preserving long radiative lifetimes which are ∼20 times larger than in standard GaAs-capped InAs/GaAs QDs. Despite the reduced electron-hole wavefunction overlap, the type-II samples are more efficient than the type-I counterparts in terms of luminescence, showing a great potential for device applications. Strain-driven In-Ga intermixing during annealing is found to modify the QD shape and composition, while As-Sb exchange is inhibited, allowing to keep the type-II structure. Sb is only redistributed within the capping layer giving rise to a more homogeneous composition.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Independent tuning of electron and hole confinement in InAs/GaAs quantum dots through a thin GaAsSbN capping layer

  • Ulloa, J.M.
  • Fernández de los Reyes, Daniel
  • Montes, M.
  • Yamamoto, K.
  • Sales Lérida, David
  • González Robledo, David
  • Guzman, A.
  • Hierro, A.
The possibility of an independent tuning of the electron and hole confinement in InAs/GaAs quantum dots (QDs) by using a thin GaAsSbN capping layer (CL) is studied. By controlling the Sb and N contents in the quaternary alloy, the band structure of the QDs can be broadly tuned and converted from type-II in the valence band (high Sb contents) to type-I and to type-II in the conduction band (high N contents). Nevertheless, the simultaneous presence of Sb and N is found to induce strain and composition inhomogeneities in the CL and to degrade the photoluminescence of the structure.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Formation of tetragonal InBi clusters in InAsBi/InAs(100) heterostructures grown by molecular beam epitaxy

  • Domínguez, Lara
  • Fernández de los Reyes, Daniel
  • Bastiman, Faebian
  • Sales Lérida, David
  • Richards, R. D.
  • Mendes, D.
  • David, John P. R.
  • González Robledo, David
This work analyses the Bi incorporation in InAs1?xBix/InAs(100) epilayers grown by MBE through advanced transmission electron microscopy techniques. Samples grown from 350–400 ?C resulted in Bi contents <3:3% exhibiting compositional variation in the growth direction. In contrast, roughly spherical clusters appeared in the sample grown at lower temperatures. The clusters are made up of the binary InBi with a tetragonal PbO phase surrounded by a matrix of InAs0:95Bi0:05 indicating the Bi solubility limit in InAs. These InBi crystals underwent a cubic distortion and are tilted 55? with regard to the InAsBi matrix. The crystallographic relationships are analysed in detail.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Impact of alloyed capping layers on the performance of InAs quantum dot solar cells

  • Utrilla, A. D.
  • Ulloa, J. M.
  • Gacevic, Z.
  • Fernández de los Reyes, Daniel
  • Artacho, I.
  • Ben Fernández, Teresa
  • González Robledo, David
  • Hierro, A.
  • Guzman, A.
The impact of using thin GaAs(Sb)(N) capping layers (CLs) on InAs/GaAs quantum dots (QDs) is investigated for their application in solar cell devices. We demonstrate the ability to combine strain-balancing techniques with band engineering approaches through the application of such CLs. Extended photoresponse is attainable by means of an independent tunability of the electron and hole confinements in the QD. Moreover, the CL acts itself as a quantum well (QW), providing an additional photoresponse, so that the devices work as hybrid QD-QW solar cells. The use of a GaAsSb CL is particularly beneficial, providing devices with efficiencies under AM1.5 conditions 20% higher than standard GaAs-capped QDs. This is mainly due to a significant increase in photocurrent beyond the GaAs bandgap, leading to an enhanced short-circuit current density (Jsc). The addition of N to the CLs, however, produces a strong reduction in Jsc. This is found to be related to carrier collection problems, namely, hindered electron extraction and retrapping in the CLs. Nevertheless, the application of reverse biases induces a release of the trapped carriers assisted by a sequential tunneling mechanism. In the case of GaAsN CLs, this leads to a complete carrier collection and reveals an even higher QD-QW-related photocurrent than when using a GaAsSb CL. The hindered carrier collection is stronger in the case of the quaternary CLs, likely due to the faster recombination rates in the type-I GaAsSbN/GaAs QW structure as compared to the type-II ternary counterparts. Nevertheless, alternative approaches, such as the use of a thinner CL or a short-period superlattice CL, lead to significant improvements, demonstrating a great potential for the quaternary CLs under a proper device design. © 2015 Elsevier B.V. All rights reserved.