Pasar al contenido principal

ELECTRODOS NANOESTRUCTURADOS PARA APLICACIONES EN SENSORES ELECTROQUIMICOS Y SUPERCONDENSADORES

MAT2010-15273

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the surface chemistry of activated carbon cloth by electrochemical methods

  • Tabti, Zakaria
  • Ruiz-Rosas, Ramiro
  • Quijada Tomás, Cesar
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
This paper presents a systematic study of the effect of the electrochemical treatment (galvanostatic electrolysis in a filter-press electrochemical cell) on the surface chemistry and porous texture of commercial activated carbon cloth. The same treatments have been conducted over a granular activated carbon in order to clarify the effect of morphology. The influence of different electrochemical variables, such as the electrode polarity (anodic or cathodic), the applied current (between 0.2 and 1.0 A) and the type of electrolyte (HNO3 and NaCl) have also been analyzed. The anodic treatment of both activated carbons causes an increase in the amount of surface oxygen groups, whereas the cathodic treatment does not produce any relevant modification of the surface chemistry. The HNO3 electrolyte produced a lower generation of oxygen groups than the NaCl one, but differences in the achieved distribution of surface groups can be benefitial to selectively tune the surface chemistry. The porous texture seems to be unaltered after the electro-oxidation treatment. The validity of this method to introduce surface oxygen groups with a pseudocapacitive behavior has been corroborated by cyclic voltammetry. As a conclusion, the electrochemical treatment can be easily implemented to selectively and quantitatively modify the surface chemistry of activated carbons with different shapes and morphologies., The authors thank the MINECO and FEDER for financial support (MAT2010-15273 project). R.R.R. gratefully acknowledges funding from MINECO through "Juan de la Cierva" program (JCI-2012-12664)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of high surface area TiO2 nanoparticles by mild acid treatment with HCl or HI for photocatalytic propene oxidation

  • Ouzzine, M.
  • Maciá Agulló, Juan Antonio
  • Lillo-Ródenas, M. A.
  • Quijada Tomás, Cesar
  • Linares-Solano, A.
Nanostructured TiO2 photocatalysts with small crystalline sizes have been synthesized by sol-gel using the amphiphilic triblock copolymer Pluronic P123 as template. A new synthesis route, based on the treatment of TiO2 xerogels with acid-ethanol mixtures in two different steps, synthesis and extraction-crystallization, has been investigated, analyzing two acids, hydrochloric and hydriodic acid. As reference, samples have also been prepared by extraction-crystallization in ethanol, being these TiO2 materials amorphous and presenting higher porosities. The prepared materials present different degrees of crystallinity depending on the experimental conditions used. In general, these materials exhibit high surface areas, with an important contribution of microporosity and mesoporosity, and with very small size anatase crystals, ranging from 5 to 7 nm. The activity of the obtained photocatalysts has been assessed in the oxidation of propene in gas phase at low concentration (100 ppmv) using a UVA lamp with a wavelength of 365 nm. Under the conditions studied, these photocatalysts show different activities in the oxidation of propene which do not depend on their surface areas, but on their crystallinity and band gap energies. Sample prepared with HCl both during synthesis and in extraction-crystallization steps is the most active one, with superior performance than Evonik P25. (C) 2014 Elsevier B.V. All rights reserved., M. Ouzzine thanks MAEC-AECID for a predoctoral fellowship. J.A. Macia-Agullo acknowledges the assistance of the Spanish MCyT for their award of a Postdoctoral Juan de la Cierva contract. The authors thank Generalitat Valenciana (GVPRE/2008/004, PROME-TEO/2009/047), FEDER, MINECO (MAT2010-15273) and Office of the Vice President for Research, Development and Innovation of University of Alicante (UAUSTI10-08) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocatalytic performance of SiO2-SWCNT nanocomposites prepared by electroassisted deposition

  • Gamero-Quijano, Alonso
  • Huerta, Francisco
  • Salinas-Torres, David
  • Morallón, Emilia
  • Montilla, Francisco
Composite materials made of porous SiO2 matrices filled with single-walled carbon nanotubes (SWCNTs) were deposited on electrodes by an electroassisted deposition method. The synthesized materials were characterized by several techniques, showing that porous silica prevents the aggregation of SWCNT on the electrodes, as could be observed by transmission electron microscopy and Raman spectroscopy. Different redox probes were employed to test their electrochemical sensing properties. The silica layer allows the permeation of the redox probes to the electrode surface and improves the electrochemical reversibility indicating an electrocatalytic effect by the incorporation of dispersed SWCNT into the silica films., This work was financed by the following research projects: MAT2010-15273 of the Spanish Ministerio de Economia y Competitividad and FEDER, PROMETEO/2013/038 of the GV, and CIVP16A1821 of the Fundacion Ramon Areces. Alonso Gamero-Quijano and David Salinas-Torres acknowledge Generalitat Valenciana (Santiago Grisolia Program) and Ministerio de Economia y Competitividad, respectively, for the funding of their research fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical methods to produce pseudocapacitance-containing porous carbons

  • Tabti, Zakaria
  • Berenguer, Raúl
  • Ruiz-Rosas, Ramiro
  • Morallón, Emilia
  • Cazorla-Amorós, Diego
  • Quijada, César|||0000-0002-9965-9651
Surface oxygen groups play a key role on the performance of porous carbon electrodes for electrochemical capacitors in aqueous media. The electrooxidation method in NaCl electrolyte using a filter press cell and dimensionally stable anodes is proposed as a viable process for the generation of oxygen groups on porous carbon materials. The experimental set-up is so flexible that allows the easy modification of carbon materials with different configurations, i.e. cloths and granular, obtaining different degrees of oxidation for both conformations without the requirement of binders and conductivity promoters. After the electrooxidation method, the attained porosity is maintained between 90 and 75% of the initial values. The surface oxygen groups generated can increase the capacitance up to a 30% when compared to the pristine material. However, a severe oxidation is detrimental since it may decrease the conductivity and increase the resistance for ion mobility. (C) The Electrochemical Society of Japan, All rights reserved., We thank the Generalitat Valenciana and FEDER (PROMETEO/2009/047) and the Spanish Ministry of Economy and Competitiveness (Projects CTQ2012-31762 and MAT2010-15273) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis, characterization and conducting properties of nanocomposites of intercalated 2-aminophenol with aniline in codium-montmorillonite

  • Khaldi, Mohamed
  • Benyoucef, Abdelghani
  • Quijada Tomás, Cesar
  • Yahiaoui, Ahmed
  • Morallón, Emilia
A simple method was used to synthesize poly(2-aminophenol), poly(2-aminophenol-co-Aniline) and polyaniline nanocomposites with sodium-montmorillonite (Na-M) using in situ intercalative oxidative polymerization. Morphology and thermal properties of the synthesized nanocomposites were examined by transmission electron microscopy (TEM) and thermogravimetric analysis. The thermal analysis shows an improved thermal stability of the nanocomposites in comparison with the pure poly(2-aminophenol). The intercalation of polymers into the clay layers was confirmed by X-ray diffraction studies, TEM images and FTIR spectroscopy. In addition, the room temperature conductivity values of these nanocomposites varied between 8.21 x 10(-5) and 6.76 x 10(-4) S cm(-1). The electrochemical behavior of the polymers extracted from the nanocomposites, has been analyzed by cyclic voltammetry. Good electrochemical response has been observed for polymer films; the observed redox processes indicate that the polymerization into Na-M produces electroactive polymers., This work was supported by the National Agency for the Development of University Research (CRSTRA and ANDRU), the Directorate General of Scientific Research and Technological Development (DGRSDT) of Algeria. Ministerio de Economia y Competitividad, FEDER and Generalitat Valenciana are also acknowledged (MAT2010-15273; PROMETEO2013/038).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Removal of 8-quinolinecarboxylic acid pesticide from aqueous solution by adsorption on activated montmorillonites

  • Mekhloufi, M.
  • Zehhaf, A.
  • Benyoucef, Abdelghani
  • Morallon, Emilia
  • Quijada, César|||0000-0002-9965-9651
Sodium montmorillonite (Na-M), acidic montmorillonite (H-M), and organo-acidic montmorillonite (Org-H-M) were applied to remove the herbicide 8-quinolinecarboxylic acid (8-QCA). The montmorillonites containing adsorbed 8-QCA were investigated by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction analysis, X-ray fluorescence thermogravimetric analysis, and physical adsorption of gases. Experiments showed that the amount of adsorbed 8-QCA increased at lower pH, reaching a maximum at pH 2. The adsorption kinetics was found to follow the pseudo-second-order kinetic model. The Langmuir model provided the best correlation of experimental data for adsorption equilibria. The adsorption of 8-QCA decreased in the order Org-H-M > H-M > Na-M. Isotherms were also used to obtain the thermodynamic parameters. The negative values of Delta G indicated the spontaneous nature of the adsorption process., This work was supported by the National Agency for the Development of University Research (CRSTRA) and the Directorate General of Scientific Research and Technological Development of Algeria. The Ministerio de Economia y Competitividad (MAT2010-15273 project) and FEDER are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Algerian natural montmorillonites for arsenic(III) removal in aqueous solution

  • Zehhaf, A.
  • Benyoucef, A.
  • Quijada Tomás, Cesar
  • Taleb, S.
  • Morallón, E.
The adsorption of As(III) from aqueous solutions using naturally occurring and modified Algerian montmorillonites has been investigated as a function of contact time, pH, and temperature. Kinetic studies reveal that uptake of As(III) ions is rapid within the first 3 h, and it slows down thereafter. Equilibrium studies show that As(III) shows the highest affinity toward acidic montmorillonite even at very low concentration of arsenic. The kinetics of As(III) adsorption on all montmorillonites used is well described by a pseudo-second-order chemical reaction model, which indicates that the adsorption process of these species is likely to be chemisorption. Adsorption isotherms of As(III) fitted the Langmuir and Freundlich isotherm models well. The adsorption of As(III) is pH-dependent obtaining an optimal adsorption at pH 5. From the thermodynamic parameters, it is concluded that the process is exothermic, spontaneous, and favorable. The results suggest that M-1, M-2, and acidic-M-2 could be used as low-cost and effective filtering materials for removal of arsenic from water., This work has been financed by the Ministerio de Economia y Competitividad and FEDER(project MAT2010-15273). The National Agency for the Development of University Research (CRSTRA), the Directorate General of Scientific Research and Technological Development (DGRSDT) of Algeria.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparison between oxidation of activated carbon by electrochemical and chemical treatments

  • Berenguer, Raúl
  • Marco-Lozar, Juan Pablo
  • Quijada Tomás, Cesar
  • Cazorla-Amoros, Diego
  • Morallón, Emilia
The anodic oxidation of a granular activated carbon (GAC) in NaCl solution has been studied. The influence of the electrocatalyst-anode material, applied current and time of treatment on both the surface chemistry and porous texture properties of the GAC has been analyzed. For comparison purposes, the same GAC has been treated with three of the classical chemical oxidants: HNO 3, H 2O 2 and (NH 4) 2S 2O 8 at different concentrations and for different times. Results show that the anodic treatment in NaCl causes a remarkable oxidation of the AC without modifying significantly its textural properties. TPD profiles and the linear dependence of the amount of CO- and CO 2-evolution against the oxidation level denotes that surface oxygen groups of similar nature and composition are formed anodically, regardless of the anode material. The achieved oxidation degree depends on the different ability of each anode for the electrochemical generation of highly oxidizing chlorine species, and it increases progressively with the applied current and the time of treatment. In general, for similar treatment times, the anodic treatment in NaCl can produce oxidation degrees much higher than the chemical treatment with (NH 4) 2S 2O 8, which has been found to be the most oxidative chemical studied in this work., Financial support by the Ministerio de Ciencia e Innovacion (MAT2010-15273 and CTQ2009-10813) and Generalitat Valenciana and FEDER (PROMETEO/2009/047) projects are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical and In Situ FTIR Study of o-Cresol on Platinum Electrode in Acid Medium

  • Taleb, Z.
  • Montilla, F.
  • Quijada Tomás, Cesar
  • Morallón, E.
  • Taleb, S.
The electrochemical behaviour of o-cresol in acidic medium on platinum electrode has been studied by cyclic voltammetry and in situ Fourier transform infrared spectroscopy. The o-cresol suffers hydrolysis during oxidation giving rise to the formation of methyl-p-benzoquinone. In situ FTIR spectroscopic studies also reveal the presence of CO2, formed as a consequence of the rupture of the aromatic ring. Moreover, the oxidation of o-cresol in acidic medium produces a polymeric film on the platinum surface that precludes further oxidation of o-cresol. The reduction of o-cresol at potentials below 0 V produces in the first step the partial reduction of the aromatic ring and when the potential goes to values below 0 V, methyl-cyclohexanone., Financial support by the Ministerio de Economia y Competitividad and FEDER (MAT2010-15273) and Generalitat Valenciana (PROMETEO/2013/038) projects is gratefully acknowledged. The authors thank Prof. J.M. Sansano from Organic Chemistry Department of Alicante University for his fruitful discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modulation of the silica sol-gel composition for the promotion of direct electron transfer to encapsulated cytochrome

  • Gamero-Quijano, A.
  • Huerta, Francisco
  • Morallón, E.
  • Montilla, Francisco
The direct electron transfer between indium-tin oxide electrodes (ITO) and cytochrome c encapsulated in different sol-gel silica networks was studied. Cyt c@silica modified electrodes were synthesized by a two-step encapsulation method mixing a phosphate buffer solution with dissolved cytochrome c and a silica sol prepared by the alcohol-free sol-gel route. These modified electrodes were characterized by cyclic voltammetry, UV-vis spectroscopy, and in situ UV-vis spectroelectrochemistry. The electrochemical response of encapsulated protein is influenced by the terminal groups of the silica pores. Cyt c does not present electrochemical response in conventional silica (hydroxyl terminated) or phenyl terminated silica. Direct electron transfer to encapsulated cytochrome c and ITO electrodes only takes place when the protein is encapsulated in methyl modified silica networks., We gratefully acknowledge Jesus Yanez and Prof. Jose Miguel Martin-Martinez from the Laboratory of Adhesion and Adhesives (University of Alicante) for their assistance in the measurements of contact angle. We also acknowledge the Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER y Ciencia (MAT2010-15273), Generalitat Valenciana (PROMETEO2013/038), and the Fundacion Ramon Areces (CIVP16A1821). Alonso Gamero-Quijano is grateful to Generalitat Valenciana (Santiago Grisolia Program) for the funding of his research fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the catalytic oxidation of ascorbic acid at self-doping polyaniline films

  • Rivero Torre, Omar
  • Sanchis, Carlos
  • Huerta, Francisco
  • Morallón, Emilia
Ascorbic acid molecules in either acid or conjugate base forms have been oxidized on self-doping carboxylated polyaniline thin films. The kinetic model proposed by Bartlett et al. has been successfully applied to the catalytic reactions. Active sites in the polymer have been identified as the rings having quinoid character. The existence of significant electrostatic repulsions between ionogenic groups at the self-doping polymer and negatively charged ascorbate molecules has been established thanks to the analysis of the pH dependence of the Michaelis constant. It has been found that in contrast to inorganic conductors the regeneration of active sites in polyaniline-based materials is slower at higher potentials. Such a behavior can be satisfactorily correlated with the potential dependence of the polymer electronic conductivity., Financial support from the Spanish MINECO, FEDER and Generalitat Valenciana through projects MAT2010-15273 and ACOMP/2012/133 is gratefully acknowledged. CS thanks MICINN for FPU grant and OR thanks Fundacion Carolina for predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of the electrochemical performance of SWCNT dispersed in a Silica Sol-Gel matrix by reactive Insertion of a Conducting Polymer

  • Gamero-Quijano, A.
  • Huerta, Francisco
  • Salinas Torres, David
  • Morallón, Emilia
  • Montilla, Francisco
The electroassisted encapsulation of Single-Walled Carbon Nanotubes was performed into silica matrices (SWCNT@SiO2). This material was used as the host for the potentiostatic growth of polyaniline (PANI) to yield a hybrid nanocomposite electrode, which was then characterized by both electrochemical and imaging techniques. The electrochemical properties of the SWCNT@SiO2-PANI composite material were tested against inorganic (Fe3+/Fe2+) and organic (dopamine) redox probes. It was observed that the electron transfer constants for the electrochemical reactions increased significantly when a dispersion of either SWCNT or PANI was carried out inside of the SiO2 matrix. However, the best results were obtained when polyaniline was grown through the pores of the SWCNT@SiO2 material. The enhanced reversibility of the redox reactions was ascribed to the synergy between the two electrocatalytic components (SWCNTs and PANI) of the composite material. (C) 2014 Elsevier Ltd. All rights reserved., This work was financed by the following research projects: MAT2010-15273 of the Spanish Ministerio de Economia y Competitividad and CIVP16A1821 of the Fundacion Ramon Areces and PROMETEO 2013/038 of the Generalitat Valenciana. Alonso Gamero-Quijano is grateful to Generalitat Valenciana (Santiago Grisolia Program) for the funding of his research fellowship. David Salinas-Torres is grateful to Ministerio de Economia y Competitividad for the funding of his research fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical behaviour of PSS-Functionalized silica films prepared by electroassisted deposition of Sol-Gel precursors

  • Gamero-Quijano, A.
  • Huerta, Francisco
  • Salinas-Torres, David
  • Morallón, E.
  • Montilla, Francisco
Porous, electrically insulating SiO2 layers containing polystyrene sulfonate (PSS) were deposited on glassy carbon electrodes by an electrochemically assisted deposition method. The obtained material was characterized by microscopic, spectroscopic and thermal techniques. Silica-PSS films modify the electrochemical response of the glassy carbon electrodes against selected redox probes. Positively charged species show reduced diffusivities across the SiO2-PSS pores, which resulted in a concentration ratio higher than 1 for these species. The opposite behaviour was found for negatively charged redox probes. These observations can be interpreted in terms of the different affinity of the GC/SiO2-PSS-modified electrode for the electroactive species, as a consequence of the negatively charged porous silica., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER (MAT2010-15273) and Fundacion Ramon Areces is gratefully acknowledged. Financial support from the Generalitat Valenciana is acknowledged (PROMETEO2013/038). A.G.Q. thanks go to Generalitat Valenciana for a Santiago Grisolia grant. D.S.T. thanks Spanish Ministerio de Economia y Competitividad for an FPI grant (BES-2010-035238).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Kinetic and thermodynamic study of the adsorption of As(III) from aqueous solutions by naturally occurring and modified montmorillonites

  • Zehhaf, A.
  • Benyouncef, Abdelghani
  • Quijada Tomás, Cesar
  • Taleb, Safia
  • Morallón, E.
[EN] Adsorption of As(III) from aqueous solutions using naturally occurring and modified Algerian montmorillonites was investigated as a function of contact time, pH and temperature. Kinetic studies reveal that uptake of As(III) ions is rapid within the first 3 hours and it slows down thereafter. Equilibrium studies show that As(III) shows the highest affinity towards Acidic-montmorillonite even at very low concentration of arsenic. A pseudo-second-order chemical reaction model was obtained for As(III). Adsorption isotherms of As(III) fitted the Langmuir and Freundlich isotherm models well. From the thermodynamic parameters, it is concluded that adsorption is exothermic, spontaneous and favorable. The results suggest that M1, M2 and Acidic-M2 could be used as effective filtering materials for removal of arsenic from water., This work has been financed by the AECID (projects AECID-PCI A/019533/08, A/023858/09 and C/031332/10) and Ministerio de Ciencia e Innovación (project MAT2010-15273). The National Agency for the Development of University Research (CRSTRA), the Directorate General of Scientific Research and Technological Development (DGRSDT) of Algeria.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lead ion adsorption from aqueous solutions in modified Algerian montmorillonites

  • Zehhaf, A.
  • Benyoucef, A.
  • Berenguer, R.
  • Taleb, S.
  • Morallon, E.
  • Quijada, César|||0000-0002-9965-9651
The adsorption of lead (II) ions on three Algerian montmorillonites (sodium, non-sodium, and acidic-activated) was studied. Transmission electron microscopy coupled with energy dispersive X-ray analysis, X-ray fluorescence and physical adsorption of gases were used to characterize the clays. This characterization has shown than the activation with acid increases the surface area as a consequence of the rupture of the laminar structure. The effect of the pH in the lead adsorption capacity was analyzed. The results show that adsorption is strongly depended on the pH. At low pH values, the mechanism that governs the adsorption behavior of clays is the competition of the metal ions with protons. Between pH 2 and 6, the main mechanism is an ion exchange process. The kinetics of the adsorption is tested with respect to pseudo-first-order and second-order models. The adsorption process, gives a better fit with the Langmuir isotherm, being the monolayer capacity ranging between 18.2 and 24.4 mg g(-1). The adsorption of lead decreased in the order Acidic-M-2 > M-2 > M-1. Thermodynamic parameters such as Delta H, Delta S, and Delta G were calculated. The adsorption process was found to be endothermic and spontaneous. The enthalpy change for Pb(II) by M-1 adsorption has been estimated as 60 kJ mol(-1), indicating that the adsorption of Pb(II) by all montmorillonites used corresponds to a physical reaction. The adsorption capacity of washed Acidic-M-2 was very high compared to M-2 and M-1., This study has been financed by the AECID (projects AECID-PCI A/019533/08 and A/023858/09) and Ministerio de Ciencia e Innovacion (project MAT2010-15273). The National Agency for the Development of University Research (CRSTRA), the Directorate General of Scientific Research and Technological Development (DGRSDT) of Algeria.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulation of the Silica Sol–Gel Composition for the Promotion of Direct Electron Transfer to Encapsulated Cytochrome c

  • Gamero-Quijano, Alonso
  • Huerta Arráez, Francisco
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The direct electron transfer between indium–tin oxide electrodes (ITO) and cytochrome c encapsulated in different sol–gel silica networks was studied. Cyt c@silica modified electrodes were synthesized by a two-step encapsulation method mixing a phosphate buffer solution with dissolved cytochrome c and a silica sol prepared by the alcohol-free sol–gel route. These modified electrodes were characterized by cyclic voltammetry, UV–vis spectroscopy, and in situ UV–vis spectroelectrochemistry. The electrochemical response of encapsulated protein is influenced by the terminal groups of the silica pores. Cyt c does not present electrochemical response in conventional silica (hydroxyl terminated) or phenyl terminated silica. Direct electron transfer to encapsulated cytochrome c and ITO electrodes only takes place when the protein is encapsulated in methyl modified silica networks.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis, Characterization and Conducting Properties of Nanocomposites of Intercalated 2-Aminophenol with Aniline in Sodium-Montmorillonite

  • Khaldi, Mohamed
  • Benyoucef, Abdelghani
  • Quijada Tomás, César
  • Yahiaoui, Ahmed
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
A simple method was used to synthesize poly(2-aminophenol), poly(2-aminophenol-co-Aniline) and polyaniline nanocomposites with sodium-montmorillonite (Na-M) using in situ intercalative oxidative polymerization. Morphology and thermal properties of the synthesized nanocomposites were examined by transmission electron microscopy (TEM) and thermogravimetric analysis. The thermal analysis shows an improved thermal stability of the nanocomposites in comparison with the pure poly(2-aminophenol). The intercalation of polymers into the clay layers was confirmed by X-ray diffraction studies, TEM images and FTIR spectroscopy. In addition, the room temperature conductivity values of these nanocomposites varied between 8.21 × 10−5 and 6.76 × 10−4 S cm−1. The electrochemical behavior of the polymers extracted from the nanocomposites, has been analyzed by cyclic voltammetry. Good electrochemical response has been observed for polymer films; the observed redox processes indicate that the polymerization into Na-M produces electroactive polymers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical and In Situ FTIR Study of o-Cresol on Platinum Electrode in Acid Medium

  • Taleb, Z.
  • Montilla, Francisco
  • Quijada Tomás, César
  • Morallon, Emilia
  • Taleb, Safia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrochemical behaviour of o-cresol in acidic medium on platinum electrode has been studied by cyclic voltammetry and in situ Fourier transform infrared spectroscopy. The o-cresol suffers hydrolysis during oxidation giving rise to the formation of methyl-p-benzoquinone. In situ FTIR spectroscopic studies also reveal the presence of CO2, formed as a consequence of the rupture of the aromatic ring. Moreover, the oxidation of o-cresol in acidic medium produces a polymeric film on the platinum surface that precludes further oxidation of o-cresol. The reduction of o-cresol at potentials below 0 V produces in the first step the partial reduction of the aromatic ring and when the potential goes to values below 0 V, methyl-cyclohexanone.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical performance of carbon gels with variable surface chemistry and physics

  • Moreno-Castilla, Carlos
  • Dawidziuk, Marta B.
  • Carrasco Marín, Francisco
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This study describes the electrochemical characterization of N-doped carbon xerogels in the form of microspheres and of carbon aerogels with varied porosities and surface oxygen complexes. The interfacial capacitance of N-doped carbon xerogels decreased with increased micropore surface area as determined by N2 adsorption at −196 °C. The interfacial capacitance showed a good correlation with the areal NXPS concentration, and the best correlation with the areal concentration of pyrrolic or pyridonic nitrogen functionalities. The gravimetric capacitance decreased with greater xerogel microsphere diameter. The interfacial capacitance of carbon aerogels increased with higher percentage of porosity as determined from particle and true densities. The interfacial capacitance showed a linear relationship with the areal oxygen concentration and with the areal concentrations of CO- and CO2-evolving groups.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polyaniline/Montmorillonite Nanocomposites Obtained by In Situ Intercalation and Oxidative Polymerization in Cationic Modified-Clay (Sodium, Copper and Iron)

  • Zehhaf, Abdelhafid
  • Morallon, Emilia
  • Benyoucef, Abdelghani
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Polyaniline/montmorillonite nanocomposites (PANI/M) were obtained by intercalation of aniline monomer into M modified with different cations and subsequent oxidative polymerization of the aniline. The modified-clay was prepared by ion exchange of sodium, copper and iron cations in the clay (Na–M, Cu–M and Fe–M respectively). Infrared spectroscopy confirms the electrostatic interaction between the oxidized PANI and the negatively charged surface of the clay. X-ray diffraction analysis provides structural information of the prepared materials. The nanocomposites were characterized by transmission electron microscopy and their thermal degradation was investigated by thermogravimetric analysis. The weight loss suggests that the PANI chains in the nanocomposites have higher thermal stability than pure PANI. The electrical conductivity of the nanocomposites increased between 12 and 24 times with respect to the pure M and this increase was dependent on the cation-modification. The electrochemical behavior of the polymers extracted from the nanocomposites was studied by cyclic voltammetry and a good electrochemical response was observed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Algerian natural montmorillonites for arsenic(III) removal in aqueous solution

  • Zehhaf, Abdelhafid
  • Benyoucef, Abdelghani
  • Quijada Tomás, César
  • Taleb, Safia
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The adsorption of As(III) from aqueous solutions using naturally occurring and modified Algerian montmorillonites has been investigated as a function of contact time, pH, and temperature. Kinetic studies reveal that uptake of As(III) ions is rapid within the first 3 h, and it slows down thereafter. Equilibrium studies show that As(III) shows the highest affinity toward acidic montmorillonite even at very low concentration of arsenic. The kinetics of As(III) adsorption on all montmorillonites used is well described by a pseudo-second-order chemical reaction model, which indicates that the adsorption process of these species is likely to be chemisorption. Adsorption isotherms of As(III) fitted the Langmuir and Freundlich isotherm models well. The adsorption of As(III) is pH-dependent obtaining an optimal adsorption at pH 5. From the thermodynamic parameters, it is concluded that the process is exothermic, spontaneous, and favorable. The results suggest that M1, M2, and acidic-M2 could be used as low-cost and effective filtering materials for removal of arsenic from water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrocatalytic Performance of SiO2-SWCNT Nanocomposites Prepared by Electroassisted Deposition

  • Gamero-Quijano, Alonso
  • Huerta Arráez, Francisco
  • Salinas-Torres, David
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
Composite materials made of porous SiO2 matrices filled with single-walled carbon nanotubes (SWCNTs) were deposited on electrodes by an electroassisted deposition method. The synthesized materials were characterized by several techniques, showing that porous silica prevents the aggregation of SWCNT on the electrodes, as could be observed by transmission electron microscopy and Raman spectroscopy. Different redox probes were employed to test their electrochemical sensing properties. The silica layer allows the permeation of the redox probes to the electrode surface and improves the electrochemical reversibility indicating an electrocatalytic effect by the incorporation of dispersed SWCNT into the silica films.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Removal of 8-quinolinecarboxylic acid pesticide from aqueous solution by adsorption on activated montmorillonites

  • Mekhloufi, Malika
  • Zehhaf, Abdelhafid
  • Benyoucef, Abdelghani
  • Quijada Tomás, César
  • Morallon, Emilia
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Sodium montmorillonite (Na-M), acidic montmorillonite (H-M), and organo-acidic montmorillonite (Org-H-M) were applied to remove the herbicide 8-quinolinecarboxylic acid (8-QCA). The montmorillonites containing adsorbed 8-QCA were investigated by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction analysis, X-ray fluorescence thermogravimetric analysis, and physical adsorption of gases. Experiments showed that the amount of adsorbed 8-QCA increased at lower pH, reaching a maximum at pH 2. The adsorption kinetics was found to follow the pseudo-second-order kinetic model. The Langmuir model provided the best correlation of experimental data for adsorption equilibria. The adsorption of 8-QCA decreased in the order Org-H-M > H-M > Na-M. Isotherms were also used to obtain the thermodynamic parameters. The negative values of ΔG indicated the spontaneous nature of the adsorption process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhancement of the Electrochemical Performance of SWCNT dispersed in a Silica Sol-gel Matrix by Reactive Insertion of a Conducting Polymer

  • Gamero-Quijano, Alonso
  • Huerta Arráez, Francisco
  • Salinas-Torres, David
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Salinas-Torres, David|||/items/351ed20b-cc25-463c-bf78-b64d35945503
The electroassisted encapsulation of Single-Walled Carbon Nanotubes was performed into silica matrices (SWCNT@SiO2). This material was used as the host for the potentiostatic growth of polyaniline (PANI) to yield a hybrid nanocomposite electrode, which was then characterized by both electrochemical and imaging techniques. The electrochemical properties of the SWCNT@SiO2-PANI composite material were tested against inorganic (Fe3+/Fe2+) and organic (dopamine) redox probes. It was observed that the electron transfer constants for the electrochemical reactions increased significantly when a dispersion of either SWCNT or PANI was carried out inside of the SiO2 matrix. However, the best results were obtained when polyaniline was grown through the pores of the SWCNT@SiO2 material. The enhanced reversibility of the redox reactions was ascribed to the synergy between the two electrocatalytic components (SWCNTs and PANI) of the composite material.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical behaviour of different redox probes on single wall carbon nanotube buckypaper-modified electrodes

  • Sieben, Juan Manuel
  • Ansón-Casaos, Alejandro
  • Montilla, Francisco
  • Martínez Fernández de Landa, María Teresa
  • Morallón, Emilia
5 figures, 3 tables.-- Supplementary information available (1 figure)., In the present work, the electrochemical properties of single-walled carbon nanotube buckypapers (BPs) were examined in terms of carbon nanotubes nature and preparation conditions. The performance of the different free-standing single wall carbon nanotube sheets was evaluated via cyclic voltammetry of several redox probes in aqueous electrolyte. Significant differences are observed in the electron transfer kinetics of the buckypaper-modified electrodes for both the outer- and inner-sphere redox systems. These differences can be ascribed to the nature of the carbon nanotubes (nanotube diameter, chirality and aspect ratio), surface oxidation degree and type of functionalities. In the case of dopamine, ferrocene/ferrocenium, and quinone/hydroquinone redox systems the voltammetric response should be thought as a complex contribution of different tips and sidewall domains which act as mediators for the electron transfer between the adsorbate species and the molecules in solution. In the other redox systems only nanotube ends are active sites for the electron transfer. It is also interesting to point out that a higher electroactive surface area not always lead to an improvement in the electron transfer rate of various redox systems. In addition, the current densities produced by the redox reactions studied here are high enough to ensure a proper electrochemical signal, which enables the use of BPs in sensing devices., J.M.S. thanks Ministerio de Educación (SB2010-132). Financial support from MINECO (MAT2010-15273, TEC2010-15736 and PRI-PIBAR-2011-1 projects),GV (PROMETEO2013/038 project) and and the Government of Aragon (DGA) and the European Social Fund (ESF) under Project DGA-ESF-T66 CNN is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigating the influence of surfactants on the stabilization of aqueous reduced graphene oxide dispersions and the characteristics of their composite films

  • Fernández Merino, M. J.
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Guardia, Laura
  • Solís Fernández, Pablo
  • Salinas-Torres, D.
  • Cazorla-Amorós, D.
  • Morallón, E.
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The stabilization of reduced graphene oxide (RGO) sheets in aqueous dispersion using a wide range of surfactants of anionic, non-ionic and zwitterionic type has been investigated and compared under different conditions of pH, surfactant and RGO concentration, or sheet size. The observed differences in the performance of the surfactants were rationalized on the basis of their chemical structure (e.g., alkylic vs. aromatic hydrophobic tail or sulfonic vs. carboxylic polar head), thus providing a reference framework in the selection of appropriate surfactants for the processing of RGO suspensions towards particular purposes. RGO-surfactant composite paper-like films were also prepared through vacuum filtration of the corresponding mixed dispersions and their main characteristics were investigated. The composite paper-like films were also electrochemically characterized. Those prepared with two specific surfactants exhibited a high capacitance in relation to their surfactant-free counterpart. © 2011 Elsevier Ltd. All rights reserved., Financial support from the Spanish MICINN (projects MAT2008-05700, MAT2010-15273 and MAT2011-26399) is gratefully acknowledged. M.J.F.-M. and D.S.-T. are indebted to MICINN for their pre-doctoral (FPI) grants. L.G. acknowledges CSIC for a post-doctoral contract (JAE-Doc)., Peer reviewed