Pasar al contenido principal

MATERIALES COMPUESTOS BASADOS EN CARBONO: NUEVOS MATERIALES PARA NUEVAS APLICACIONES

MAT2011-25029

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The surface tension of pure Zn measured by means of the maximum bubble pressure method

  • Ferri, J.M|||0000-0002-1269-4973
  • Molina, J.M.
  • Louis, E.
[EN] The surface tension sigma of pure Zn and its temperature coefficient have been measured by means of the maximum bubble pressure technique over the temperature range [Tm, m , Tm+250 m +250 degrees C], where Tm m is the melting temperature. Alumina and quartz capillaries of various radii were used. Alumina capillaries were coated with boron nitride to discard possible wetting and high purity argon was used as bubbling gas. In addition, sigma was measured while heating, cooling, or introducing the capillaries in the melt at several chosen temperatures. All measurements with alumina capillaries showed a negative temperature coefficient while those with quartz capillaries gave a positive temperature coefficient. These results are compatible with Nogi et al. conclusion in the sense that positive temperature coefficients reported in the literature should be ascribed to oxygen and/or impurity effects enhanced in volatile metals. In particular we argue that the positive temperature coefficient is a consequence of the concomitant action of several factors, namely, vaporization of Zn, oxygen traces in the bubbling gas, and the oxygen and Si produced in the chemical reactions involving quartz and liquid zinc., The authors acknowledge partial financial support from the "Ministerio de Economia y Competitividad" (Projects MAT2011-25029 and MAGNO - MAGnesium New Technological Opportunities, GRU-POANTOLIN-08Y) J.M. Molina wishes to thank the Universidad de Alicante (project GRE08-P13), the "Generalitat Valenciana" (Project GVPRE/2008/244) and also the "Ministerio de Ciencia e Innovacion" for a "Ramon y Cajal" contract.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Role of Al4C3 on the stability of the thermal conductivity of Al/diamond composites subjected to constant or oscillating temperature in a humid environment

  • Monje López, Ivonne E.
  • Louis, Enrique
  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Present technologies allow fabrication of aluminum/diamond particles composites with excellent thermal properties, in particular showing the by far highest Thermal Conductivity of any of the materials being evaluated for thermal management. Although there is a widespread consensus concerning the essential role that the interface plays, it is not yet fully clear how the aluminum carbide formed at the interface affects thermal properties. In particular, how it affects the stability of the thermal properties of composites subjected to thermal treatments under wetting conditions. This is precisely the objective of the present work. To this end, samples were fabricated by means of gas pressure infiltration of liquid Al into preforms of packed diamond particles. Infiltration was carried out at two temperatures and three contact times. Thermal fatigue with cooling phase in water and performance in moisture environments at temperatures close to 100 °C were evaluated. The results show that those samples having low amounts of carbide at the interface (shorter contact times) are more prone to a decrease of the thermal conductivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimizing thermal conductivity in gas-pressure infiltrated aluminum/diamond composites by precise processing control

  • Monje López, Ivonne E.
  • Louis, Enrique
  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The effects of processing conditions on the thermal conductivity (TC) of aluminum/diamond composites fabricated by means of gas-pressure infiltration, have been evaluated using a device that allows a highly precise control of infiltration temperature and contact time between the liquid metal and diamond. Both variables have strong effects on the TC of final materials, through chemical and morphological modifications of the interface. Thus, maximizing heat conduction requires a proper choice of those two variables. TC’s up to 670 W/mK have been obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Some Issues in Liquid Metals Research

  • Caturla, Maria J.
  • Jiang, Jian-Zhong
  • Louis, Enrique
  • Molina Jordá, José Miguel
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The ten articles [1–10] included in this Special Issue on “Liquid Metals” do not intend to comprehensively cover this extensive field, but, rather, to highlight recent discoveries that have greatly broadened the scope of technological applications of these materials. Improvements in understanding the physics of liquid metals are, to a large extent, due to the powerful theoretical tools in the hands of scientists, either semi-empirical [1,5,6] or ab initio (molecular dynamics, see [7]).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On critical aspects of infiltrated Al/diamond composites for thermal management: Diamond quality versus processing conditions

  • Monje López, Ivonne E.
  • Louis, Enrique
  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Al/diamond composites containing diamond particles of different qualities have been manufactured by gas pressure-assisted metal infiltration and characterized by thermal conductivity (TC) measurements. The results show that the intrinsic thermal conductivity of diamond (varied with the diamond quality) plays a minor role on TC. TC is mainly governed by the Al–diamond interface characteristics, which are determined by a proper control exerted through processing conditions. Albeit a very low cost and low quality diamond is used, a high value of 667 W/m K has been measured for Al/diamond composites produced under optimized processing conditions. Values above 740 W/m K are reported for the best diamond quality explored in this work. These experimental results, which assign the control over TC mainly to the interface conductance, suggest that many of the limiting values of TC reported in literature for the different explored metal–diamond systems, need to be reconsidered by proper precise control of interface evolution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The surface tension of pure Zn measured by means of the maximum bubble pressure method

  • Ferri Azor, José Miguel
  • Molina Jordá, José Miguel
  • Louis, Enrique
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The surface tension σ of pure Zn and its temperature coefficient have been measured by means of the maximum bubble pressure technique over the temperature range [Tm, Tm+250 °C], where Tm is the melting temperature. Alumina and quartz capillaries of various radii were used. Alumina capillaries were coated with boron nitride to discard possible wetting and high purity argon was used as bubbling gas. In addition, σ was measured while heating, cooling, or introducing the capillaries in the melt at several chosen temperatures. All measurements with alumina capillaries showed a negative temperature coefficient while those with quartz capillaries gave a positive temperature coefficient. These results are compatible with Nogi et al. conclusion in the sense that positive temperature coefficients reported in the literature should be ascribed to oxygen and/or impurity effects enhanced in volatile metals. In particular we argue that the positive temperature coefficient is a consequence of the concomitant action of several factors, namely, vaporization of Zn, oxygen traces in the bubbling gas, and the oxygen and Si produced in the chemical reactions involving quartz and liquid zinc.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Interfacial nano-engineering in Al/diamond composites for thermal management by in situ diamond surface gas desorption

  • Monje López, Ivonne E.
  • Louis, Enrique
  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The manuscript shows that nano-engineering the surface of diamond particles prior contacting the liquid metal strongly enhances the Thermal Conductivity (TC) of Al/diamond composites. Composites were fabricated by gas pressure infiltration within a two-step engineering procedure: i) diamond surface was in situ subjected to gas desorption by annealing at 760 °C or 850 °C, and, ii) the contact time between liquid metal and diamond was strictly controlled. The synergic action of surface modification and controlled processing conditions allows an outstanding increasing of TC from 422 W/mK to 734 W/mK (around 42% of increment) in composites fabricated with medium-quality diamond particles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Anisotropy in thermal conductivity of graphite flakes–SiCp/matrix composites: Implications in heat sinking design for thermal management applications

  • Molina Jordá, José Miguel
  • Louis, Enrique
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Within the frame of heat dissipation for electronics, a very interesting family of anisotropic composite materials, fabricated by liquid infiltration of a matrix into preforms of oriented graphite flakes and SiC particles, has been recently proposed. Aiming to investigate the implications of the inherent anisotropy of these composites on their thermal conductivity, and hence on their potential applications, materials with matrices of Al–12 wt.% Si alloy and epoxy polymer have been fabricated. Samples have been cut at a variable angle with respect to the flakes plane and thermal conductivity has been measured by means of two standard techniques, namely, steady state technique and laser flash method. Experimental results are presented and discussed in terms of current models, from which important technological implications for heat sinking design can be derived.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design of composites for thermal management: Aluminum reinforced with diamond-containing bimodal particle mixtures

  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
A new design route is proposed in order to fabricate aluminum matrix diamond-containing composite materials with optimized values of thermal conductivity (TC) for thermal management applications. The proper size ratio and proportions of particulate diamond–diamond and diamond–SiC bimodal mixtures are selected based on calculations with predictive schemes, which combine two main issues: (i) the volume fraction of the packed particulate mixtures, and (ii) the influence of different types of particulates (with intrinsically different metal/reinforcement interfacial thermal conductances) on the overall thermal conductivity of the composite material. The calculated results are validated by comparison with measurements on composites fabricated by gas pressure infiltration of aluminum into preforms of selected compositions of particle mixtures. Despite the relatively low quality (low price) of the diamond particles used in this work, outstanding values of TC are encountered: a maximum of 770 W/m K for Al/diamond–diamond and values up to 690 W/m K for Al/diamond–SiC.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effects of infiltration pressure on mechanical properties of Al–12Si/graphite composites for piston engines

  • Narciso, Javier
  • Molina Jordá, José Miguel
  • Rodríguez Guerrero, Alejandro
  • Rodríguez Reinoso, Francisco
  • Louis, Enrique
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
In this work results for the flexural strength and the thermal properties of interpenetrated graphite preforms infiltrated with Al-12wt%Si are discussed and compared to those for packed graphite particles. To make this comparison relevant, graphite particles of four sizes in the range 15–124 μm, were obtained by grinding the graphite preform. Effects of the pressure applied to infiltrate the liquid alloy on composite properties were investigated. In spite of the largely different reinforcement volume fractions (90% in volume in the preform and around 50% in particle compacts) most properties are similar. Only the Coefficient of Thermal Expansion is 50% smaller in the preform composites. Thermal conductivity of the preform composites (slightly below 100 W/m K), may be increased by reducing the graphite content, alloying, or increasing the infiltration pressure. The strength of particle composites follows Griffith criterion if the defect size is identified with the particle diameter. On the other hand, the composites strength remains increasing up to unusually high values of the infiltration pressure. This is consistent with the drainage curves measured in this work. Mg and Ti additions are those that produce the most significant improvements in performance. Although extensive development work remains to be done, it may be concluded that both mechanical and thermal properties make these materials suitable for the fabrication of piston engines.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mesophase pitch-derived graphite foams with selective distribution of TiC nanoparticles for catalytic applications

  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
TiC-supported metals are systems of great importance in catalysis science and technology. Albeit their interest, catalysts based on monoliths consisting of TiC-containing carbonaceous foams have not yet been fabricated. This work aims to present a route for fabrication of mesophase pitch-derived open-pore graphite foams with TiC nanoparticles selectively distributed in two locations: at the surface of the pore cells, able for metal-support, and in the bulk, essential to achieve high degree of graphitization for enhancement of thermal conductivity. The double distinctive effect of the nanoparticles in the monoliths makes these materials interesting to be checked in catalytic applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Production of SiC Materials by Reactive Infiltration

  • Caccia, Mario
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
The use of oak sawdust as carbon precursor for SiC manufacture via reactive infiltration was studied. The effect of oak sawdust pressing parameters, temperature and pressure, on the final SiC's properties was studied. Final product's quality was evaluated through density measurement, and microstructure and pore size distribution variations were characterized with optical microscopy and mercury porosimetry. Pressed oak sawdust preforms were carbonized to obtain a carbon porous preform which was then infiltrated with melted silicon. Successful infiltration of preforms pressed at room temperatures were performed, to obtain a porous SiC. Hot pressed preforms were not satisfactory infiltrated due to a narrowing of their pores caused by SiC formation's expansiveness.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fabrication of Mg foams for biomedical applications by means of a replica method based upon spherical carbon particles

  • Ferri Azor, José Miguel
  • Molina Jordá, José Miguel
  • Louis, Enrique
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Interest in Mg foams is increasing due to their potential use as biomaterials. Fabrication methods determine to a great extent their structure and, in some cases, may pollute the foam. In this work Mg foams are fabricated by a replica method that uses as skeleton packed spheres of active carbon, a material widely utilized in medicine. After Mg infiltration, carbon particles are eliminated by an oxidizing heat treatment. The latter covers Mg with MgO which improves performance. In particular, oxidation retards degradation of the foam, as the polarization curves of the Mg foam with and without oxide indicate. The sphericity and regularity of C particles allows control of the structure of the produced open-cell foams.