Pasar al contenido principal

CONSTRUCTOS PARA LA REGENERACION GUIADA DE ESTRUCTURAS DEL SISTEMA NERVIOSO CENTRAL

MAT2011-28791-C03-03

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and evaluation of hyaluronan nanocomposite conduits for neural tissue regeneration

  • Mullor Ruiz, Ismael
  • Mnatsakanyan, Hayk
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Hyaluronan-based hydrogels are among the most promising neural tissue engineering materials because of their biocompatibility and the immunomodulation capabilities of their degradation byproducts. Despite these features, the problems related to their handling and mechanical properties have not yet been solved. In the present work it is proposed to address these drawbacks through the development of nanohybrid materials in which different nanometric phases (carbon nanotubes, mesoporous silica nanoparticles) are embedded in a crosslinked hyaluronan matrix. These nanohybrid matrices were next processed in the shape of cylindrical conduits aimed at promoting and improving neural stem cell differentiation and regeneration in neural tracts. These constructs could be of use specifically for peripheral nerve regeneration. Results of the study show that the inclusion of the different phases improved physico-chemical features of the gel such as its relative electrical permittivity, water intake and elastic modulus, giving hints on how the nanometric phase interacts with hyaluronan in the composite as well as for their potential in combined therapeutic approaches. Regarding the in vitro biological behavior of the hybrid tubular scaffolds, an improved early cell adhesion and survival of Schwann cells in their lumen was found, as compared to conduits made of pure hyaluronan gels. Furthermore, the differentiation and survival of neural precursors was not compromised, despite alleged safety concerns., The authors acknowledge funding through the MAT2011-28791-C03-02,03 project from the Spanish Ministerio de Economia y Competitividad. The authors thank deeply the advice of C. Martinez Ramos, Ph.D. on the cell culture tasks, Prof. J. M. Meseguer Duenas on the dielectric impedance spectroscopy, and S. Ivaschenko with FTIR spectroscopy. Lastly, Prof. P. Amoros from Institut de Ciencia de Materials of Universitat de Valencia (ICMUV) and Prof. J. M. Verdugo are thanked for providing the mesoporous silica nanoparticles and the rat neurospheres, respectively. The Electronic Microscopy Service of the Universitat Politecnica de Valencia is acknowledged their help and dedication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scaffolds based on hyaluronan and carbon nanotubes gels

  • Arnal Pastor, María Pilar
  • Tallà-Ferrer, C.
  • Herrero-Herrero, María
  • Martínez-Gómez Aldaraví, A.
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Physico-chemical and mechanical properties of hyaluronic acid/carbon nanotubes nanohybrids have been correlated with the proportion of inorganic nanophase and the preparation procedure. The mass fraction of -COOH functionalized carbon nanotubes was varied from 0 to 0.05. Hyaluronic acid was crosslinked with divinyl sulfone to improve its stability in aqueous media and allow its handling as a hydrogel. A series of samples was dried by lyophilization to obtain porous scaffolds whereas another was room-dried allowing the collapse of the hybrid structures. The porosity of the former, together with the tighter packing of hyaluronic acid chains, results in a lower water absorption and lower mechanical properties in the swollen state, because of the easier water diffusion. The presence of even a small amount of carbon nanotubes (mass fraction of 0.05) limits even more the swelling of the matrix, owing probably to hybrid interactions. These nanohybrids do not seem to degrade significantly during 14 days in water or enzymatic medium., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Contract grant sponsor: Spanish Ministerio de Economia y Competitividad; contract grant numbers: MAT2011-28791-C03-02 and -03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of scaffold morphology on co-cultures of human endothelial and adipose tissue-derived stem cells

  • Arnal Pastor, María Pilar
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] The interior of tissue engineering scaffolds must be vascularizable and allow adequate nutrients perfusion in order to ensure the viability of the cells colonizing them. The promotion of rapid vascularization of scaffolds is critical for thick artificial constructs. In the present study co-cultures of human endothelial and adipose tissue-derived stem cells have been performed in poly(ethyl acrylate) scaffolds with two different pore structures: grid-like (PEA-o) or sponge-like (PEA-s), in combination with a self-assembling peptide gel filling the pores, which aims to mimic the physiological niche. After 2 and 7 culture days, cell adhesion, proliferation and migration, the expression of cell surface markers like CD31 and CD90 and the release of VEGF were assessed by means of immunocytochemistry, scanning electronic microscopy, flow cytometry and ELISA analyses. The study demonstrated that PEA-s scaffolds promoted greater cell organization into tubular-like structures than PEA-o scaffolds, and this was enhanced by the presence of the peptide gel. Paracrine signaling from adipose cells significantly improved endothelial cell viability, proving the advantageous combination of this system for obtaining easily vascularizable tissue engineered grafts., Contract grant sponsor: Spanish Ministry of Education; contract grant number: FPU 2009-1870
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Schwann-cell cylinders grown inside hyaluronic-acid tubular scaffolds with gradient porosity

  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Moratal, David|||0000-0002-2825-3646
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Monleon De la Fuente, Adrian
  • Barcia Albacar, Juan Antonio
[EN] Cell transplantation therapies in the nervous system are frequently hampered by glial scarring and cell drain from the damaged site, among others. To improve this situation, new biomaterials may be of help. Here, novel single-channel tubular conduits based on hyaluronic acid (HA) with and without poly-l-lactide acid fibers in their lumen were fabricated. Rat Schwann cells were seeded within the conduits and cultured for 10days. The conduits possessed a three-layered porous structure that impeded the leakage of the cells seeded in their interior and made them impervious to cell invasion from the exterior, while allowing free transport of nutrients and other molecules needed for cell survival. The channel's surface acted as a template for the formation of a cylindrical sheath-like tapestry of Schwann cells continuously spanning the whole length of the lumen. Schwann-cell tubes having a diameter of around 0.5mm and variable lengths can thus be generated. This structure is not found in nature and represents a truly engineered tissue, the outcome of the specific cell-material interactions. The conduits might be useful to sustain and protect cells for transplantation, and the biohybrids here described, together with neuronal precursors, might be of help in building bridges across significant distances in the central and peripheral nervous system., The authors acknowledge financing through projects MAT2011-28791-C03-02 and 03, and ERA-NET NEURON project PRI-PIMNEU-2011-1372. We thank the Cytomics Core Facility at Principe Felipe Research Center (CIPF, Valencia, Spain) for their support and advice in flow cytometry experiments, and the Electron Microscopy Service at the UPV, where the SEM images were obtained. The authors thankfully acknowledge the reviewers' comments, which have helped to improve the clarity of the paper's presentation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Channeled polymeric scaffolds with polypeptide gel filling for lengthwise guidance of neural cells

  • Conejero Garcia, Álvaro
  • Vilarino-Feltrer, G.
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
CNS damages are often irreversible since neurons of the central nervous system are unable to regenerate after an injury. As a new strategy within the nervous system tissue engineering, multifunctional systems based on two different biomaterials to support axonal guidance in damaged connective tracts have been developed herein. These systems are composed of a channeled scaffold made of ethyl acrylate and hydroxyethyl acrylate copolymer, P(EA-co-HEA), with parallel tubular micropores, combined with an injectable and in situ gelable self-assembling polypeptide (RAD16-I) as pores filler. The polymer scaffold is intended to provide a three-dimensional context for axon growth; subsequently, its morphology and physicochemical parameters have been determined by scanning electron microscopy, density measurements and compression tests. Besides, the hydrogel acts as a cell-friendly nanoenvironment while it creates a gradient of bioactive molecules (nerve growth factor, NGF) along the scaffolds channels; the chemotactic effect of NGF has been evaluated by a quantitative ELISA assay. These multifunctional systems have shown ability to keep circulating NGF, as well as proper short-term in vitro biological response with glial cells and neural progenitors., The authors acknowledge funding through the Spanish Ministerio de Ciencia e Innovacion (MAT2011-28791-C03-02 and -03). Dr. J.M. Garcia Verdugo (Department of Comparative Neurobiology, Cavanilles Institute of Biodiversity and Evolutive Biology, Universitat de Valencia) is thanked for kindly providing the cells employed in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining self-assembling peptide gels with three-dimensional elastomer scaffolds

  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Arnal Pastor, María Pilar
  • Martínez Ramos, Cristina
  • Vilariño Feltrer, Guillermo
  • Vikingsson, Line
  • Castells Sala, Carla
  • Semino, Carlos Eduardo
[EN] Some of the problems raised by the combination of porous scaffolds and self-assembling peptide (SAP) gels as constructs for tissue engineering applications are addressed for the first time. Scaffolds of poly(- ethyl acrylate) and the SAP gel RAD16-I were employed. The in situ gelation of the SAP gel inside the pores of the scaffolds was studied. The scaffold-cum-gel constructs were characterized morphologically, physicochemically and mechanically. The possibility of incorporating an active molecule (bovine serum albumin, taken here as a model molecule for others) in the gel within the scaffold’s pores was assessed, and the kinetics of its release in phosphate-buffered saline was followed. Cell seeding and colonization of these constructs were preliminarily studied with L929 fibroblasts and subsequently checked with sheep adipose-tissue-derived stem cells intended for further preclinical studies. Static (conventional) and dynamically assisted seedings were compared for bare scaffolds and the scaffold-cum-gel constructs. The SAP gel inside the pores of the scaffold significantly improved the uniformity and density of cell colonization of the three-dimensional (3-D) structure. These constructs could be of use in different advanced tissue engineering applications, where, apart from a cell-friendly extracellular matrix -like aqueous environment, a larger-scale 3-D structure able to keep the cells in a specific place, give mechanical support and/or conduct spatially the tissue growth could be required., The authors acknowledge funding through the European Commission FP7 project RECATABI (NMP3-SL-2009-229239), and from the Spanish Ministerio de Ciencia e Innovacion through projects MAT2011-28791-C03-02 and -03. Dr. J.C. Chachques (Hopital Europeen Georges Pompidou, Paris) is thanked for providing the ASCs employed in this study. MMP acknowledges support of CIBER-BBN initiative, financed by Institut de Salud Carlos III (Spain) with the assistance of the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interaction between acrylic substrates and RAD16-I peptide in its self-assembling

  • Arnal Pastor, María Pilar
  • González-Mora, Debora
  • García-Torres, Fernando
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Self-assembling peptides (SAP) are widely used as scaffolds themselves, and recently as fillers of microporous scaffolds, where the former provides a cell-friendly nanoenvironment and the latter improves its mechanical properties. The characterization of the interaction between these short peptides and the scaffold material is crucial to assess the potential of such a combined system. In this work, the interaction between poly(ethyl acrylate) (PEA) and 90/10 ethyl acrylate-acrylic acid copolymer P(EAcoAAc) with the SAP RAD16-I has been followed using a bidimensional simplified model. By means of the techniques of choice (congo red staining, atomic force microscopy (AFM), and contact angle measurements) the interaction and self-assembly of the peptide has proven to be very sensitive to the wettability and electro-negativity of the polymeric substrate., The authors acknowledge funding through the European Commission FP7 project RECATABI (NMP3-SL-2009-229239), and from the Spanish Ministerio de Ciencia e Innovacion through projects MAT2011-28791-C03-02 and -03. This work was also supported by the Spanish Ministerio de Educacion through M. Arnal-Pastor FPU 2009-1870 grant. The authors acknowledge the assistance and advice of Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grid polymeric scaffolds with polypeptide gel filling as patches for infarcted tissue regeneration

  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Arnal Pastor, María Pilar
  • Vikingsson, Line
[EN] Scaffolds of poly(ethyl acrylate) (PEA) with interconnected cylindrical orthogonal pores filled with a self-assembling peptide (SAP) gel are here proposed as patches for infarcted tissue regeneration. These combined systems aim to support cell therapy and meet further requirements posed by the application: the three-dimensional architecture of the elastomeric scaffold is expected to lodge the cells of interest in the damaged zone avoiding their death or migration, and at the same time conduct cell behavior and give mechanical support if necessary; the ECM-like polypeptide gel provides a cell-friendly aqueous microenvironment, facilitates diffusion of nutrients and cell wastes and is expected to improve the distribution and viability of the seeded cells within the pores and stimulate angiogenesis., Research supported by the European Comission through the RECATABI FP7 NMP3-SL-2009-229239 project and the spanish Ministerio de Ciencia e Innovación through the MAT2011-28791-C03-02 and -03 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrophilic surface modification of acrylate-based biomaterials

  • Arnal Pastor, María Pilar
  • Comín-Cebrián, S.
  • Martínez-Ramos, C.
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Acrylic polymers have proved to be excellent with regard to cell adhesion, colonization and survival, in vitro and in vivo. Highly ordered and regular pore structures thereof can be produced with the help of polyamide templates, which are removed with nitric acid. This treatment converts a fraction of the ethyl acrylate side groups into acrylic acid, turning poly(ethyl acrylate) scaffolds into a more hydrophilic and pH-sensitive substrate, while its good biological performance remains intact. To quantify the extent of such a modification, and be able to characterize the degree of hydrophilicity of poly(ethyl acrylate), poly(ethyl acrylate) was treated with acid for different times (four, nine and 17 days), and compared with poly(acrylic acid) and a 90/10%wt. EA/AAc copolymer (P(EA-co-AAc)). The biological performance was also assessed for samples immersed in acid up to four days and the copolymer, and it was found that the incorporation of acidic units on the material surface was not prejudicial for cells. This surface modification of 3D porous hydrophobic scaffolds makes easier the wetting with culture medium and aqueous solutions in general, and thus represents an advantage in the manageability of the scaffolds., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge financing through project FP7 NMP3-SL-2009-229239 'Regeneration of cardiac tissue assisted by bioactive implants' (RECATABI) and projects MAT2011-28791-C03-02 and -03 from the Spanish Ministerio de Ciencia e Innovacion. This work was also supported by the Spanish Ministry of Education through M. Arnal-Pastor FPU AP2009-1870 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of synthesis parameters on hyaluronic acid hydrogels intended as nerve conduits

  • Ortuño-Lizarán, Isabel
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Hydrogels have widely been proposed lately as strategies for neural tissue regeneration, but there are still some issues to be solved before their efficient use in tissue engineering of trauma, stroke or the idiopathic degeneration of the nervous system. In a previous work of the authors a novel Schwann-cell structure with the shape of a hollow cylinder was obtained using a three-dimensional conduit based in crosslinked hyaluronic acid as template. This original engineered tissue of tightly joined Schwann cells obtained in a conduit lumen having 400 mu m in diameter is a consequence of specific cell-material interactions. In the present work we analyze the influence of the hydrogel concentration and of the drying process on the physicochemical and biological performance of the resulting tubular scaffolds, and prove that the cylinder-like cell sheath obtains also in scaffolds of a larger inner diameter. The diffusion of glucose and of the protein BSA through the scaffolds is studied and characterized, as well as the enzymatic degradation kinetics of the lyophilized conduits. This can be modulated from a couple of weeks to several months by varying the concentration of hyaluronic acid in the starting solution. These findings allow to improve the performance of hyaluronan intended for neural conduits, and open the way to scaffolds with tunable degradation rate adapted to the site and severity of the injury., The authors acknowledge Spanish Ministerio de Ciencia e Innovacion through projects PRI-PIMNEU-2011-1372 (ERANET-Neuron), MAT2011-28791-C03-02 and -03. I. Ortuno Lizaran acknowledges support by CIBER-BBN starting grant.