Pasar al contenido principal

ELECTROQUIMICA DE MATERIALES SEMICONDUCTORES APLICADA A LA FOTOSINTESIS ARTIFICIAL

MAT2012-37676

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of Copper Ferrite as a Novel Photocathode for Water Reduction: Improving Its Photoactivity by Electrochemical Pretreatment

  • Díez García, María Isabel
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Díez García, María Isabel|||/items/5b95a809-5530-42c4-9736-4c4dd70b5b80
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
Studies on water-splitting p-type oxide electrodes based on nontoxic earth-abundant elements are scarce. Herein, the behavior of electrodes composed of CuFe2O4 nanoparticles 30 nm in size is presented. The as-prepared CuFe2O4 nanoporous electrodes exhibit small anodic photocurrents in 0.1 m NaOH. However, an electrochemical pretreatment consisting in the application of sufficiently positive potentials leads to p-type behavior with a photocurrent onset as high as 1.1 V versus the reversible hydrogen electrode, which is among the most positive values reported for an oxide absorbing visible light (band gap of 2.1 eV). This photocurrent is partly due to H2 evolution, but there are also signs of photoreduction of the material. Although the photocurrents are modest, these results point to the possibility of using CuFe2O4 as a photocathode material in water-splitting devices. Furthermore, the strategy employed for the enhancement in the CuFe2O4 photoactivity could be extended to other photocathode materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sol–gel copper chromium delafossite thin films as stable oxide photocathodes for water splitting

  • Díaz-García, Ana Korina
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
Significant effort is being devoted to the study of photoactive electrode materials for artificial photosynthesis devices. In this context, photocathodes promoting water reduction, based on earth-abundant elements and possessing stability under illumination, should be developed. Here, the photoelectrochemical behavior of CuCrO2 sol–gel thin film electrodes prepared on conducting glass is presented. The material, whose direct band gap is 3.15 eV, apparently presents a remarkable stability in both alkaline and acidic media. In 0.1 M HClO4 the material is significantly photoactive, with IPCE values at 350 nm and 0.36 V vs. RHE of over 6% for proton reduction and 23% for oxygen reduction. This response was obtained in the absence of charge extraction layers or co-catalysts, suggesting substantial room for optimization. The photocurrent onset potential is equal to 1.06 V vs. RHE in both alkaline and acidic media, which guarantees the combination of the material with different photoanodes such as Fe2O3 or WO3, potentially yielding bias-free water splitting devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improving the photoactivity of bismuth vanadate thin film photoanodes through doping and surface modification strategies

  • Quiñonero, Javier
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
Currently, one of the most attractive and desirable ways to solve the energy challenge is harvesting energy directly from the sunlight through the so-called artificial photosynthesis. Among the ternary oxides based on earth–abundant metals, bismuth vanadate has recently emerged as a promising photoanode. Herein, BiVO4 thin film photoanodes have been successfully synthesized by a modified metal-organic precursor decomposition method, followed by an annealing treatment. In an attempt to improve the photocatalytic properties of this semiconductor material for photoelectrochemical water oxidation, the electrodes have been modified (i) by doping with La and Ce (by modifying the composition of the BiVO4 precursor solution with the desired concentration of the doping element), and (ii) by surface modification with Au nanoparticles potentiostatically electrodeposited. La and Ce doping at concentrations of 1 and 2 at% in the BiVO4 precursor solution, respectively, enhances significantly the photoelectrocatalytic performance of BiVO4 without introducing important changes in either the material structure or the electrode morphology, according to XRD and SEM characterization. In addition, surface modification of the electrodes with Au nanoparticles further enhances the photocurrent as such metallic nanoparticles act as co-catalysts, promoting charge transfer at the semiconductor/solution interface. The combination of these two complementary ways of modifying the electrodes has resulted in a significant increase in the photoresponse, facilitating their potential application in artificial photosynthesis devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A comparative photophysical and photoelectrochemical study of undoped and 2-aminothiophene-3-carbonitrile-doped carbon nitride

  • Díaz-García, Ana Korina
  • Díez García, María Isabel
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Díez García, María Isabel|||/items/5b95a809-5530-42c4-9736-4c4dd70b5b80
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
Introducing molecular dopants in carbon nitride has been shown to dramatically modify its electronic structure, resulting in efficient charge separation and improved photocatalytic efficiency. Herein, we have studied the effect of doping carbon nitride with 2-aminothiophene-3-carbonitrile. A fundamental photoelectrochemical characterization has been performed comparing the behavior of the resulting material (ATCN) with undoped carbon nitride (CN). On the one hand, it is shown that the photocurrent onset shifts with the pH up to a value of 8 for both materials, as expected theoretically. On the other, ATCN, which benefits from additional light absorption, shows an improved photoactivity toward hydrogen evolution. In addition, it displays intriguing photoluminescence properties that can be additionally engineered by modulating the potential. In a more general vein, this study illustrates how to shed light on the effects of introducing molecular dopants in the CN matrix.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Hematite Nanorod Electrodes Modified with Molybdenum: Photoelectrochemical Studies

  • Cots, Ainhoa
  • Cibrev, Dejan
  • Bonete, Pedro
  • Gómez, Roberto
  • Bonete, Pedro|||/items/192bc3e6-f649-46c9-86b4-5c862ad5bbe8
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
The preparation of hematite nanorod electrodes modified with molybdenum and their photoelectrochemical behavior for water photooxidation have been addressed in the quest for improved electrodes for water splitting. The hematite nanorods were synthesized through chemical bath deposition, and Mo was added by following two variants of a drop-casting method based on ammonium heptamolybdate solutions. FE-SEM, TEM, XRD, and XPS were employed for electrode structural and morphological characterization. The reported results reveal that the impregnation method does not cause significant changes in the hematite structure and nanorod morphology. Importantly, the modification with Mo triggers a significant improvement in the photoactivity of the electrodes, obtaining a photocurrent increase of up to 43×. A specific Mott−Schottky analysis applicable to nanostructured electrodes was performed, revealing that the modification with Mo leads to an increase in electron concentration and to a shift of the flat band potential toward more positive values. A second role of Mo as a passivating agent needs to be invoked to explain the experimental observations. It is worth noting that this modification method allows precise control of the amount of Mo contained in the samples while maintaining the morphology of the electrode.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Potentiostatic Reversible Photoelectrochromism: An Effect Appearing in Nanoporous TiO2/Ni(OH)2 Thin Films

  • Cibrev, Dejan
  • Jankulovska, Milena
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
In the field of energy saving, finding composite materials with the ability of coloring upon both illumination and change of the applied electrode potential keeps on being an important goal. In this context, chemical bath deposition of Ni(OH)2 into nanoporous TiO2 thin films supported on conducting glass leads to electrodes showing both conventional electrochromic behavior (from colorless to dark brown and vice versa) together with photochromism at constant applied potential. The latter phenomenon, reported here for the first time, is characterized by fast and reversible coloration upon UV illumination. The bleaching kinetics shows first order behavior with respect to the NiIII centers in the film, and an order 1.2 with respect to electrons in the TiO2 film. From a more applied point of view, this study opens up the possibility of having two-mode smart windows showing not only conventional electrochromism but also reversible darkening upon illumination.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Investigating Water Splitting with CaFe2O4 Photocathodes by Electrochemical Impedance Spectroscopy

  • Díez García, María Isabel
  • Gómez, Roberto
  • Díez García, María Isabel|||/items/5b95a809-5530-42c4-9736-4c4dd70b5b80
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
Artificial photosynthesis constitutes one of the most promising alternatives for harvesting solar energy in the form of fuels, such as hydrogen. Among the different devices that could be developed to achieve efficient water photosplitting, tandem photoelectrochemical cells show more flexibility and offer high theoretical conversion efficiency. The development of these cells depends on finding efficient and stable photoanodes and, particularly, photocathodes, which requires having reliable information on the mechanism of charge transfer at the semiconductor/solution interface. In this context, this work deals with the preparation of thin film calcium ferrite electrodes and their photoelectrochemical characterization for hydrogen generation by means of electrochemical impedance spectroscopy (EIS). A fully theoretical model that includes elementary steps for electron transfer to the electrolyte and surface recombination with photogenerated holes is presented. The model also takes into account the complexity of the semiconductor/solution interface by including the capacitances of the space charge region, the surface states and the Helmholtz layer (as a constant phase element). After illustrating the predicted Nyquist plots in a general manner, the experimental results for calcium ferrite electrodes at different applied potentials and under different illumination intensities are fitted to the model. The excellent agreement between the model and the experimental results is illustrated by the simultaneous fit of both Nyquist and Bode plots. The concordance between both theory and experiments allows us to conclude that a direct transfer of electrons from the conduction band to water prevails for hydrogen photogeneration on calcium ferrite electrodes and that most of the carrier recombination occurs in the material bulk. In more general vein, this study illustrates how the use of EIS may provide important clues about the behavior of photoelectrodes and the main strategies for their improvement.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Interplay Between Structure, Stoichiometry, and Electron Transfer Dynamics in SILAR-based Quantum Dot-Sensitized Oxides

  • Wang, Hai
  • Barceló Gisbert, Irene
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Bonn, Mischa
  • Cánovas, Enrique
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
We quantify the rate and efficiency of picosecond electron transfer (ET) from PbS nanocrystals, grown by successive ionic layer adsorption and reaction (SILAR), into a mesoporous SnO2 support. Successive SILAR deposition steps allow for stoichiometry- and size-variation of the QDs, characterized using transmission electron microscopy. Whereas for sulfur-rich (p-type) QD surfaces substantial electron trapping at the QD surface occurs, for lead-rich (n-type) QD surfaces, the QD trapping channel is suppressed and the ET efficiency is boosted. The ET efficiency increase achieved by lead-rich QD surfaces is found to be QD-size dependent, increasing linearly with QD surface area. On the other hand, ET rates are found to be independent of both QD size and surface stoichiometry, suggesting that the donor–acceptor energetics (constituting the driving force for ET) are fixed due to Fermi level pinning at the QD/oxide interface. Implications of our results for QD-sensitized solar cell design are discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New insights into water photooxidation on reductively pretreated hematite photoanodes

  • Cibrev, Dejan
  • Tallarida, Massimo
  • Das, Chittaranjan
  • Lana-Villarreal, Teresa
  • Schmeisser, Dieter
  • Gómez, Roberto
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
It has been recently demonstrated that the photoactivity toward oxygen evolution of a number of n-type metal oxides can be substantially improved by a reductive electrochemical pretreatment. Such an enhancement has been primarily linked to the formation of low valent metal species that increase electrode conductivity. In this work, we report new insights into the electrochemical doping using highly ordered (110)-oriented hematite nanorods directly grown on FTO. The reductive pretreatment consists in applying negative potentials for a controlled period of time. Such a pretreatment was optimized in both potentiostatic and potentiodynamic regimes. We show that the optimized pretreatment enhances electrode conductivity due to an increase in charge carrier density. However, it additionally triggers changes in the morphologic, catalytic and electronic properties that facilitate the separation and collection of the photogenerated charge carriers causing an up to 8-fold enhancement in the photocurrent for water oxidation. The reductive pretreatment can be considered as a highly controllable electrochemical n-type doping with the amount of generated Fe2+/polaron species and the change in film morphology as the main factors determining the final efficiency for water photooxidation of the resulting electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modification of Hematite Electronic Properties with Trimethyl Aluminum to Enhance the Efficiency of Photoelectrodes

  • Tallarida, Massimo
  • Das, Chittaranjan
  • Cibrev, Dejan
  • Kukli, Kaupo
  • Tamm, Aile
  • Ritala, Mikko
  • Lana-Villarreal, Teresa
  • Gómez, Roberto
  • Leskelä, Markku
  • Schmeisser, Dieter
  • Gómez, Roberto|||/items/54c380df-7a67-4966-b6fb-118255eee311
  • Lana-Villarreal, Teresa|||/items/6fb2d64d-2bcc-46d4-88f6-a562973c02b5
The electronic properties of hematite were investigated by means of synchrotron radiation photoemission (SR-PES) and X-ray absorption spectroscopy (XAS). Hematite samples were exposed to trimethyl aluminum (TMA) pulses, a widely used Al-precursor for the atomic layer deposition (ALD) of Al2O3. SR-PES and XAS showed that the electronic properties of hematite were modified by the interaction with TMA. In particular, the hybridization of O 2p states with Fe 3d and Fe 4s4p changed upon TMA pulses due to electron inclusion as polarons. The change of hybridization correlates with an enhancement of the photocurrent density due to water oxidation for the hematite electrodes. Such an enhancement has been associated with an improvement in charge carrier transport. Our findings open new perspectives for the understanding and utilization of electrode modifications by very thin ALD films and show that the interactions between metal precursors and substrates seem to be important factors in defining their electronic and photoelectrocatalytic properties.