Pasar al contenido principal

NANOMATERIALES HIBRIDOS MESOPOROSOS Y COMPOSITES PARA EL DISEÑO DE SISTEMAS SENSORES, DE SUMINISTRO CONTROLADO Y REMEDIACION

MAT2012-38429-C04-03

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability of different mesoporous silica particles during an in vitro digestion

  • Pérez-Esteve, Édgar|||0000-0002-0452-1394
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Ruiz Rico, María
  • Torre, Cristina De la
  • Amoros del Toro, Pedro Jose
  • Guillen Villar, Carmen
Mesoporous silica materials have the ability to entrap drugs, nutrients and functional biomolecules and can be able to act as smart delivery systems capable to control and target the release of their cargo in a particular part of the gastrointestinal tract when administrated orally. However, the aptness of these encapsulation supports in in vivo oral controlled release relies on their chemical stability through the digestive tube. In this context, we have evaluated the stability of four different mesoporous silica particles, frequently used as encapsulating supports, during an in vitro digestion process comprising buccal, stomach and intestinal phases. Results showed that after 4 h of digestion, the textural properties of silica supports in the form of nanoparticles (MCM-41 and UVM-7 nanoparticles) were lost in varying degrees, whereas silica microparticles supports (MCM-41 and SBA-15 microparticles) endures better the digestion process. Moreover, the functionalization of the surface with N-1-(3-trimethoxysilylpropyl)diethylenetriamine, an organic moiety commonly used in the preparation of pH-responsive mesoporous silica particles, resulted in an improvement of the stability of the supports. (C) 2016 Elsevier Inc. All rights reserved., Authors gratefully acknowledge the financial support from the Ministerio de Economia y Competitividad (Projects AGL2012-39597-C02-01, AGL2012-39597-C02-02 and MAT2012-38429-C04-01 and MAT2012-38429-C04-03), Generalitat Valenciana (project PROMETEO/2009/016) and FEDER founding. E.P. and M.R are grateful to the Ministerio de Ciencia e Innovacion for their grants (AP2008-00620, AP2010-4369). Electron Microscopy Service of the UPV is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hyaluronic acid-silica nanohybrid gels

  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Poveda-Reyes, S.
  • Amoros del Toro, Pedro Jose
  • Beltran, D.
Excessive water sorption and low mechanical properties are a severe drawback in some biomedical applications of hyaluronic acid (HA). A way to improve these properties is here explored through the novel concept of nanohybrid hydrogels consisting of a HA matrix including different amounts of silica-derived species. This inorganic filler phase controls the mechanical and swelling properties of HA cross-linked matrices. Below a 2 wt % of silica in the systems, nanoparticle aggregates of tens of nanometers and silica oligomers are distributed more or less homogeneously throughout the organic matrix, without percolating. This morphology of the silica phase is accompanied by an increased swelling degree of the composite when compared with pure HA. For higher silica mass ratios in the composites the inorganic counterpart coalesces, leading to a continuous inorganic silica network interpenetrated with the organic HA network, which coexists with a dispersed phase of silica-nanoparticle aggregates. Silica oligomers originating in the exposition of the nanoparticles to reactives during the composite preparation procedure contribute to the continuity of the silica network. For these compositions, swelling is reduced three times when compared with pure HA, and a significant improvement of the mechanical properties occurs. Water-containing samples of these materials exhibited a glass transition, which pure dry HA does not. None of the compositions studied showed any cytotoxicity. Thus, the materials could be of use in tissue engineering applications where these properties of HA need to be modulated., The authors acknowledge financing from the Spanish Ministerio de Ciencia e Innovacion through Projects MAT2011-28791-C03, MAT2012-38429-C04-03, and PRI-PIMNEU-2011-1372. The authors thank the institutional support from VLC/CAMPUS (MCI "Medicina Regenerativa").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(N-isopropylacrylamide)-gated Fe3O4/SiO2 core shell nanoparticles with expanded mesoporous structures for the temperature triggered release of lysozyme

  • Yu, Erick
  • Galiana, Irene
  • Stroeve, Pieter
  • Amoros del Toro, Pedro Jose
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Aznar, Elena|||0000-0003-0361-3876
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Murguía, Jose R.|||0000-0001-9364-4603
Core-shell nanoparticles comprised of Fe3O4 cores and a mesoporous silica shell with an average expanded pore size of 6.07 nm and coated with a poly(N-isopropylacrylamide) (PNIPAM) layer (CS MSNs EP PNIPAM) were prepared and characterized. The nanoparticles was loaded with (Ru(bipy)3 2+) dye or an antibacterial enzyme, lysozyme, to obtain CS MSNs EP PNIPAM Ru(bipy)3 2+ and CS MSNs EP PNIPAM Lys, respectively. The lysozyme loading was determined to be 160 mg/g of nanoparticle. It was seen that Ru(bipy)3 2+ and lysozyme release was minimal at a room temperature of 25 ºC while at physiological temperature (37 º C), abrupt release was observed. The applicability of the CS MSNs EP PNIPAM Lys was further tested with two Gram-positive bacteria samples, Bacillus cereus and Micrococcus luteus. At physiological temperature, the nanoparticles were shown to reduce bacterial growth, indicating a successful release of lysozyme from the nanoparticles. This nanoparticle system shows potential as a nanocarrier for the loading of similarly sized proteins or other species as a drug delivery platform., The authors wish to express their gratitude to the facilities at Ciudad Politecnica de la Innovacion (CPI), El Centro de Reconocimiento Molecular y Desarrollo Tecnologico (IDM), the Biotechnology Department at UPV, and the Instituto de Biologia Molecular y Celular de Plantas (IBMCP) at UPV for assistance in the materials characterization techniques and for providing the bacterial samples for antibacterial testing. Warm thanks are given to the Transatlantic Partnership for Excellence in Engineering (TEE) program, an Erasmus Mundus-Action 2 project by the European Commission, for the opportunity to undertake research at the collaborating university, UPV. The University of California Office of the President (UCOP) Lab Fees Research Program funded this research. The authors also thank the Spanish Government (Projects MAT2012-38429-C04-01 and MAT2012-38429-C04-03), the Generalitat Valenciana (Project PROMETEOII/2014/047) for support.