Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The structure of 2,4,6-tris(1H–pyrazol-1-yl)-1,3,5-triazine in the solid state: on polymorphs, pseudopolymorphs and co-crystals

  • Alkorta, Ibon
  • Reviriego, Felipe
  • Elguero, José
  • Monge, M. Ángeles
  • Gutiérrez-Puebla, Enrique
Three structures of 2,4,6-tris(1H–pyrazol-1-yl)-1,3,5-triazine (TPT) have been determined at 193 K: the isolated molecule (2a), a solvate containing molecules of water and acetonitrile (2b) and a complex of two molecules of TPT and three molecules of water (2c). To discuss the structures, B3LYP/6–311++G(d,p) calculations have been carried out, in particular, in what concerns hydrogen bonds., This work was carried out with financial support from the Ministerio de Economía y Competitividad (Project Nos. CTQ2015-63997-C2-2-P and MAT2013-45460-R), Comunidad Autónoma de Madrid (Project Fotocarbon, ref. S2013/MIT-2841 and Project PHAMA_2.0, ref. S2013/MIT-2740). Computer, storage and other resources from the CTI (CSIC) are gratefully acknowledged. This publication is dedicated to our friend Professor Viktor Milata for his contributions to this field., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Addressed realization of multication complex arrangements in metal-organic frameworks

  • Castillo-Blas, Celia
  • Peña O'Shea, Víctor A. de la
  • Puente-Orench, Inés
  • Romero de Paz, Julio
  • Sáez-Puche, R.
  • Gutiérrez-Puebla, Enrique
  • Gándara Barragán, Felipe
  • Monge, M. Ángeles
The preparation of materials with structures composed of multiple metal cations that occupy specific sites is challenging owing to the difficulty of simultaneously addressing the incorporation of different elements at desired precise positions. We report how it is possible to use a metal-organic framework (MOF) built with a rod-shaped inorganic secondary building unit (SBU) to combine multiple metal elements at specific positions in a manner that is controllable at atomic and mesoscopic scales. Through the combination of four different metal elements at judiciously selected molar ratios, 20 MOFs of different compositions and the same topology have been prepared and characterized. The use of diffraction techniques, supported by density functional theory calculations, has led us to determine various possible atomic arrangements of the metal cations within the SBUs. In addition, seven of the compounds combine multiple types of atomic arrangements, which are mesoscopically distributed along the crystals. Given the large diversity and importance of rod-based MOFs, we believe that these findings offer a new general strategy to produce complex materials with required compositions and controllable arrangements of the metal cations for desired applications., Work at Instituto de Ciencia de Materiales de Madrid–Consejo Superior de Investigaciones Científicas (CSIC) has been supported by the Spanish Ministry of Economy and Competitiveness (MINECO) Projects MAT2013-45460-R, CTQ2014-61748-EXP, and MAT2016-78465-R. F.G. acknowledges financial support from Fundación General CSIC (Programa ComFuturo) and MINECO (Ramón y Cajal program). Computational time has been provided by the Centre de Supercomputació de Catalunya. This work, developed under the HyMAP project, has received funding from the European Research Council under the European Union’s Horizon 2020 research and innovation program (grant 648319)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unusual magnetic behaviors and electronic configurations driven by diverse Co(II) or Mn(II) MOF architectures

  • Bernini, María Celeste
  • Paz, Julio Romero de
  • Snejko, Natalia
  • Sáez-Puche, Regino
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
Five novel metal organic frameworks were obtained by hydro-solvothermal reactions using the hexafluorisopropylidenebis(benzoic) acid (H2hfipbb) as linker and Co(II) or Mn(II) ions as connectors. [Co2(Hhfipbb)(TEA)], compound 1 (TEA = triethanolamine trianion) with a three-dimensional (3D) framework, and a tpu net; [Co1.5(hfipbb)2]·HN(CH2CH3)3 and [Co3(hfipbb)2]·2{HN(CH2CH3)3}, compounds 2 and 2-a, respectively, both with two-dimensional structure, sql topologies, and different layer packings. Compounds 3 and 4, having the general formula [M2(hfipbb)2]·C7H8, where M = Co (3) or Mn (4), have 3D frameworks with an sqc topology. A deep analysis of the magnetic measurements reveals different striking magnetic behaviors resulting from diverse secondary building unit and framework architectures. Compound 1 presents canted antiferromagnetic chains, compound 2 contains ferromagnetic linear trimeric clusters, and compound 3 exhibits ferromagnetic chains. For the three compounds, a 3D canted antiferromagnetic structure takes place at ∼8 K by means of weak magnetic interactions between the mentioned magnetic units. Such long-range magnetic order is precluded with the application of a high enough magnetic field. Compound 4 evidenced intrachain antiferromagnetic interactions., This work has been supported by the Spanish MCYT Project No. MAT2010–17571 MAT2013–45460, FAMA S2009/MAT-1756 Comunidad Autónoma de Madrid, and Consolider-Ingenio CSD2006–2001.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable catalytic activity of solid solution metal-organic frameworks in one-pot multicomponent reactions

  • Aguirre-Díaz, Lina María
  • Gándara Barragán, Felipe
  • Iglesias, Marta
  • Snejko, Natalia
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
The aim of this research is to establish how metal–organic frameworks (MOFs) composed of more than one metal in equivalent crystallographic sites (solid solution MOFs) exhibit catalytic activity, which is tunable by virtue of the metal ions ratio. New MOFs with general formula [InxGa1–x(O2C2H4)0.5(hfipbb)] were prepared by the combination of Ga and In. They are isostructural with their monometal counterparts, synthesized with Al, Ga, and In. Differences in their behavior as heterogeneous catalysts in the three-component, one pot Strecker reaction illustrate the potential of solid solution MOFs to provide the ability to address the various stages involved in the reaction mechanism., This work has been supported by the Spanish Ministry of Economy and Competitiveness (MINECO) projects MAT2010-17571, MAT2013-45460-R, MAT2011-29020-C02-02, FAMA S2009/MAT-1756 Comunidad Autónoma de Madrid, and Consolider-Ingenio CSD2006-2001. L.M.A.-D. acknowledges an FPI scholarship from MINECO and Fondo Social Europeo from the European Union. F.G. acknowledges MINECO for funding through the “Juan de la Cierva” program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward understanding the structure-catalyst activity relationship of new indium MOFs as catalysts for solvent-free ketone cyanosilylation

  • Aguirre-Díaz, Lina María
  • Iglesias, Marta
  • Snejko, Natalia
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
Four new indium metal–organic frameworks, MOFs, namely [In2(hfipbb)3(1,10-phen)2]·2H2O (InPF-12), [In2(hfipbb)3(2,2′-bipy)2]·2H2O (InPF-13), [In2(hfipbb)3(4,4′-bipy)] (InPF-14) and [In4(OH)4(hfipbb)4(4,4′-bipy)] (InPF-15), (InPF = indium polymeric framework, hfipbb = hexafluoroisopropylidene bisbenzoate, phen = phenantroline, bipy = bipyridine), have been hydrothermally obtained and result in efficient Lewis acid catalysts in solvent-free cyanosilylation of carbonyl compounds. For acetophenone: (i) the coordination number and μ-OH groups presence seem to be decisive factors to obtain a better catalytic behavior and (ii) the presence of Lewis base moieties (C[double bond, length as m-dash]O groups not coordinated to indium cation), besides the Lewis acid sites, creates a two-component catalytic system, based on the “dual activation” phenomenon that makes InPF-15 the best catalyst in this type of reaction. It was also found that the use of this highly reactive, recyclable and environmentally benign catalyst allows the efficient synthesis of various trimethylsilyl cyanohydrins from a wide range of cyclic, aliphatic and aromatic ketones., L.M.A.-D. acknowledges a FPI scholarship from the Spanish Ministry of Economy and Competitiveness (MINECO) and Fondo Social Europeo from the EU. This work has been supported by the Spanish MCYT Projects MAT2010-17571, MAT2013-45460 R, MAT2011-29020-C02-02, FAMA S2009/MAT-1756 Comunidad Autonoma de Madrid, and Consolider-Ingenio CSD2006-2001.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synchronizing substrate activation rates in multicomponent reactions with metal-organic framework catalysts

  • Aguirre-Díaz, Lina María
  • Iglesias, Marta
  • Snejko, Natalia
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
A study on the influence of the cation coordination number, number of Lewis acid centers, concurrent existence of Lewis base sites, and structure topology on the catalytic activity of six new indium MOFs, has been carried out for multicomponent reactions (MCRs). The new indium polymeric frameworks, namely [In(OH)(popha)(HO)]·3 HO (InPF-16), [In(popha)(2,2′-bipy)]·3 HO (InPF-17), [In(OH)(popha)(4,4′-bipy)]·4 HO (InPF-18), [In(popha)(4,4′-bipy)]·3 HO (InPF-19), [In(OH)(Hpopha)]·0.5 (1,7-phen) (InPF-20), and [In(popha)(1,10-phen)]·4 HO (InPF-21) (InPF=indium polymeric framework, Hpopha=5-(4-carboxy-2-nitrophenoxy)isophthalic acid, phen=phenanthroline, bipy=bipyridine), have been hydrothermally obtained by using both conventional heating (CH) and microwave (MW) procedures. These indium frameworks show efficient Lewis acid behavior for the solvent-free cyanosilylation of carbonyl compounds, the one pot Passerini 3-component (P-3CR) and the Ugi 4-component (U-4CR) reactions. In addition, InPF-17 was found to be a highly reactive, recyclable, and environmentally benign catalyst, which allows the efficient synthesis of α-aminoacyl amides. The relationship between the Lewis base/acid active site and the catalytic performance is explained by the 2D seven-coordinated indium framework of the catalyst InPF-17. This study is an attempt to highlight the main structural and synthetic factors that have to be taken into account when planning a new, effective MOF-based heterogeneous catalyst for multicomponent reactions., This work has been supported by the Spanish Ministry of Economy and Competitiveness (MINECO) projects MAT2010‐17571, MAT2013‐45460‐R, MAT2011‐29020‐C02‐02, FAMA S2009/MAT‐1756, Comunidad Autónoma de Madrid, and Consolider‐Ingenio CSD2006‐2001. L.M.A.‐D. acknowledges a FPI scholarship from MINECO and Fondo Social Europeo from the European Union.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal phase competition by addition of a second metal cation in solid solution metal-organic frameworks

  • Castillo-Blas, Celia
  • Snejko, Natalia
  • Peña-O'Shea, Victor A. de la
  • Gallardo, J.
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
Herein we report a synthetic study focused on the preparation of solid-solution metal-organic frameworks, MOFs, with the use of two kinds of linkers. In particular, we have explored the system composed by zinc, cobalt, 1,2,4-triazole and 4,4′-hexafluoroisopropylidenebisbenzoic acid (Hhfipbb). During this study, four new MOFs have been isolated, denoted TMPF-88 [M(hfipbb)(triazole)(HO)], TMPF-90 [M(triazole)(OCHCH)], TMPF-91 [M(hfipbb)(triazole)(HO)] and TMPF-95 [M(hfipbb)(triazole)(HO)] (TMPF = transition metal polymeric framework, M = Zn, Co, or mixture of them). The study demonstrates that the addition of a second metal element during the MOF synthesis has a major effect in the formation of new phases, even at very high Zn/Co metal ratios. Furthermore, we show that during the MOF formation reaction, there is a competition among different crystal phases, where kinetically favoured phases of various compositions crystallize in short reaction times, precluding the formation of the pure solid-solution phases of other energetically more stable MOFs., This work has been supported by the Spanish Ministry of Economy and Competitiveness, project MAT2013-45460-R. Financial support by Fundación General CSIC (Programa ComFuturo) is acknowledged (F.G.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A mesoporous indium metal-organic framework: remarkable advances in catalytic activity for strecker reaction of ketones

  • Reinares-Fisac, Daniel
  • Aguirre-Díaz, Lina María
  • Iglesias, Marta
  • Snejko, Natalia
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
With the aim of developing new highly porous, heterogeneous Lewis acid catalysts for multicomponent reactions, a new mesoporous metal-organic framework, InPF-110 ([InO(btb)(HCOO)(L)], (Hbtb = 1,3,5-tris(4-carboxyphenyl)benzene acid, L = methanol, water, or ethanol), has been prepared with indium as the metal center. It exhibits a Langmuir surface area of 1470 m g, and its structure consists of hexagonal pores with a 2.8 nm aperture, which allows the diffusion of multiple substrates. This material presents a large density of active metal sites resulting in outstanding catalytic activity in the formation of substituted α-aminonitriles through the one-pot Strecker reaction of ketones. In this respect, InPF-110 stands out compared to other catalysts for this reaction due to the small catalyst loadings required, and without the need for heat or solvents. Furthermore, X-ray single crystal diffraction studies clearly show the framework-substrate interaction through coordination to the accessible indium sites., This work has been supported by the Spanish Ministry of Economy and Competitiveness (MINECO) Projects MAT2013-45460-R, MAT2014-52085-C2-2, and CTQ2014-61748-EXP. D.R.-F. acknowledges an FPU scholarship from the Spanish Ministry of Education, Culture and Sport. Financial support by Fundación General CSIC (Programa ComFuturo) is acknowledged (F.G.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A titanium-organic framework as an exemplar of combining the chemistry of metal- and covalent-organic frameworks

  • Nguyen, H. L.
  • Gándara Barragán, Felipe
  • Furukawa, H.
  • Doan, T. L. H.
  • Cordova, Kyle E.
  • Yaghi, O. M.
A crystalline material with a two-dimensional structure, termed metal-organic framework-901 (MOF-901), was prepared using a strategy that combines the chemistry of MOFs and covalent-organic frameworks (COFs). This strategy involves in situ generation of an amine-functionalized titanium oxo cluster, TiO(OCH)(AB) (AB = 4-aminobenzoate), which was linked with benzene-1,4-dialdehyde using imine condensation reactions, typical of COFs. The crystal structure of MOF-901 is composed of hexagonal porous layers that are likely stacked in staggered conformation (hxl topology). This MOF represents the first example of combining metal cluster chemistry with dynamic organic covalent bond formation to give a new crystalline, extended framework of titanium metal, which is rarely used in MOFs. The incorporation of Ti(IV) units made MOF-901 useful in the photocatalyzed polymerization of methyl methacrylate (MMA). The resulting polyMMA product was obtained with a high-number-average molar mass (26 850 g mol) and low polydispersity index (1.6), which in many respects are better than those achieved by the commercially available photocatalyst (P-25 TiO). Additionally, the catalyst can be isolated, reused, and recycled with no loss in performance., The photocatalysis work was funded by VNU-HCM (A2015-50-01-HĐ-KHCN and MANAR-CS-2015-04) and U.S. Office of Naval Research Global: Naval International Cooperative Opportunities in Science and Technology (N62909-15-1N056). PXRD data was collected at the Advanced Photon Source (beamline 11-BM-B), a U.S. Department of Energy (DOE) Office of Science User Facility operated by Argonne National Laboratory (DE-AC02-06CH11357). F.G. acknowledges funding by the Spanish Ministry of Economy and Competitiveness (MAT2013-45460-R) and Fundacion General CSIC (Programa ComFuturo).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Group 13th metal-organic frameworks and their role in heterogeneous catalysis

  • Aguirre-Díaz, Lina María
  • Reinares-Fisac, Daniel
  • Iglesias, Marta
  • Gutiérrez-Puebla, Enrique
  • Gándara Barragán, Felipe
  • Snejko, Natalia
  • Monge, M. Ángeles
Through the pages of this review, we describe the most important MOFs so far built with the group 13th elements: indium, gallium and aluminum, with particular emphasis on indium-based materials. We also review the role of these materials as heterogeneous catalysts in several organic transformations. Thus, on one hand, we comment on the MOFs developed along the years with these three p-elements in order to appreciate the evolution of the control of the synthesis process that now allows developing green materials using environmentally friendly conditions. On the other hand, we review the different approaches of these MOFs as heterogeneous catalysts used both in standard well-known organic transformations and in multicomponent coupling reactions., This work has been supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO – Spain) projects MAT2013-45460-R, MAT2014-52085-C2-2-P, MAT2016-78465-R and CTQ2014-61748-EXP, Fondo Social Europeo from the European Union. Comunidad Autónoma de Madrid S2013/MIT-2740 (PHAMA 2.0). D.R.-F. acknowledges an FPU scholarship from the Spanish Ministry of Education, Culture and Sport. Financial support by Fundación General CSIC (Programa ComFuturo) is acknowledged (F.G.).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Addressed realization of multication complex arrangements in metal-organic frameworks

  • Castillo-Blas, C.
  • de la Pena-O'Shea, V.A.
  • Puente-Orench, I.
  • de Paz, J.R.
  • Saez-Puche, R.
  • Gutierrez-Puebla, E.
  • Gandara, F.
  • Monge, A.
The preparation of materials with structures composed of multiple metal cations that occupy specific sites is challenging owing to the difficulty of simultaneously addressing the incorporation of different elements at desired precise positions. We report how it is possible to use a metal-organic framework (MOF) built with a rod-shaped inorganic secondary building unit (SBU) to combine multiple metal elements at specific positions in a manner that is controllable at atomic and mesoscopic scales. Through the combination of four different metal elements at judiciously selected molar ratios, 20 MOFs of different compositions and the same topology have been prepared and characterized. The use of diffraction techniques, supported by density functional theory calculations, has led us to determine various possible atomic arrangements of the metal cations within the SBUs. In addition, seven of the compounds combine multiple types of atomic arrangements, which are mesoscopically distributed along the crystals. Given the large diversity and importance of rod-based MOFs, we believe that these findings offer a new general strategy to produce complex materials with required compositions and controllable arrangements of the metal cations for desired applications.