Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence for changes on the lithium conduction dimensionality of Li0.5-yNayLa0.5Nb2O6 (0 ≤ y ≤ 0.5) perovskites

  • Jiménez, Ricardo
  • Díez-Gómez, Virginia
  • Sanz Lázaro, Jesús
  • Kobylianska, Sofia D.
  • V'yunov, Oleg I.
  • Belous, Anatolii G.
Li0.5-yNayLa0.5Nb2O6 samples (y = 0-0.5) were synthesized by the solid-state reaction (SSR). Structural features of the ap × ap × 2ap perovskite series were investigated by X-ray diffraction (XRD), nuclear magnetic resonance (NMR) and density functional theory DFT simulation techniques. The location of La ions was assessed by Rietveld analysis of XRD patterns, and structural sites occupied by Li, Na and Nb ions investigated by MAS-NMR spectroscopy. In Li-rich samples, La and Li ions are preferentially located at z/c = 0 planes, but as the Na content increases, La and Na occupy both z/c = 0 and 0.5 planes. To analyze La and Li possible arrangements, different structural models have been considered in DFT simulations, confirming the cation ordering deduced from XRD patterns and the impediment of Na ions to move through square windows of the perovskite. The structural information deduced has been used to discuss transport properties deduced by Impedance Spectroscopy (IS). In Li rich samples, the La arrangement in alternating planes favors a 2D-dimensional Li conductivity. The incorporation of Na in two crystallographic planes reduces La ordering and increases Li conductivity. La disorder favours the change from 2D to 3D Li conductivity, which could explain the broad maximum detected in the Li conductivity as a function of the Na content., This work has been funded by the Spanish projects MINECO MAT2013-46452-C4-2R and MATERYENER3-CM (S2013/MIT-2753) and the European project NANOLICOM (FP7-PEOPLE-2009-IRSES). S2013/MIT-2753/MATERYENER3-CM info:eu-repo/grantAgreement/EC/FP7/247579
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimization of the synthesis conditions of nanostructure 3DOM Li4Ti5O12 spinel with high rate capability

  • Sobrados, Isabel
  • Amarilla, José Manuel
  • Sanz Lázaro, Jesús
  • Martínez, Sandra
  • Tonti, Dino
  • Enciso, Eduardo
  • Torralvo, María José
  • Vázquez Santos, Beatriz
Oral presentation given at the ECS Conference on Electrochemical Energy Conversion & Storage with SOFC-XIV, held in Glasglow (Scotland) on July 26-31th, 2015., Li4Ti5O12 spinel (LTO) is a potential candidate for anode materials in power LIBs due to the high Li-ion mobility and cyclability. At 1.56V Li4Ti5O12 inserts 3 lithium ions with a theoretical capacity of 175 mAh/g. Li4Ti5O12 spinel consists of lithium and titanium atoms randomly distributed on one-half of the octahedral sites and lithium atoms filling one-eighth of the tetrahedral sites within the oxygen close packed lattice. As current is applied and lithium is passed, Ti4+ is reduced to Ti3+ within the octahedrally coordinated framework, allowing a topotactic transition between Li4Ti5O12 ¿current ¿Li7Ti5O12. The inserted lithium ions and the tetrahedrally coordinated lithium move to occupy adjacent octahedral sites. A variety of preparation methods, including sol-gel, hydrothermal and template synthesis, have been developed in order to obtain structures with large surface area and open pores as the three dimensionally ordered macroporous (3DOM) spinels. The synthesis of pure phases of 3DOM-LTO structures presents difficulties; some samples results in different amounts of Li2TiO3, rutile, and anatase as side products and the high temperatures destruct the porous structure. As calcination time increases, grains of lithium titanate grow larger and, consequently, the 3DOM structure breaks down. 3DOM architecture, however, comes at the expense of phase purity. In spite of the interest for this material, to the best of our knowledge reports on its preparation as 3DOM material are scarce. Since we found the result critically depended on the salt used and the thermal treatment, particular emphasis was given to the understanding of the formation process. This study aims to achieve the best synthesis conditions to prepare nanostructured 3DOM-LTO. Samples have been synthesized by a colloidal templating process with and without hydrothermal conditions. It is also studied the effect of a pre-forming step and subsequent incorporation of lithium or directly addressing the chemical processes in one step. We have found that a well-defined sequence of steps during synthesis is necessary for the successful formation of the inverse opal. 3DOM-LTO synthetize samples have been studied by means of thermal analysis, x-ray diffraction (XRD) and solid-state nuclear magnetic resonance (NMR). Morphological and microstructural characterizations are carried out by scanning and transmission electron microscopy (FE-SEM, TEM) and by gas adsorption. The remarkable improvement of the electrochemical performances, specially a high current, is shown by comparing with LTO-commercial samples., This research has been supported by the projects MAT2011-22969, MAT2013-46452-C4-2-R and MATERYENER3CM S2013/MIT-2753.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling Ti/Ge cistribution in LiTi2–xGex(PO4)3 NASICON series by 31P MAS NMR and first-principles DFT calculations

  • Díez-Gómez, Virginia
  • Arbi, Kamel
  • Sanz Lázaro, Jesús
Ti/Ge distribution in rhombohedral LiTiGe(PO) NASICON series has been analyzed by P magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and first-principles density functional theory (DFT) calculations. Nuclear magnetic resonance is an excellent probe to follow Ti/Ge disorder, as it is sensitive to the atomic scale environment without long-range periodicity requirements. In the samples considered here, PO units are surrounded by four Ti/Ge octahedra, and then, five different components ascribed to P(OTi), P(OTi)(OGe), P(OTi)(OGe), P(OTi)(OGe), and P(OGe) environments are expected in P MAS NMR spectra of R3c NASICON samples. However, P MAS NMR spectra of analyzed series display a higher number of signals, suggesting that, although the overall symmetry remains R3c, partial substitution causes a local decrement in symmetry. With the aid of first-principles DFT calculations, 10 detected P NMR signals have been assigned to different TiGe arrangements in the R3 subgroup symmetry. In this assignment, the influence of octahedra of the same or different R(PO) structural units has been considered. The influence of bond distances, angles and atom charges on P NMR chemical shieldings has been discussed. Simulation of the LiTiGe(PO) series suggests that detection of 10 P environments is mainly due to the existence of two oxygen types, O1 and O2, whose charges are differently affected by Ge and Ti occupation of octahedra. From the quantitative analysis of detected components, a random Ti/Ge distribution has been deduced in next nearest neighbor (NNN) sites that surround tetrahedral PO units. This random distribution was supported by XRD data displaying Vegard's law., This work has been funded by the Spanish projects MINECO MAT2013-46452-C4-2R and MATERYENER3-CAM (S2013/MIT-2753).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cation Miscibility and Lithium Mobility in NASICON Li1+xTi2-xScx(PO4)3 (0 ≤ x ≤ 0.5) Series: A Combined NMR and Impedance Study

  • Kahlaoui, Radhouene
  • Arbi, Kamel
  • Sobrados, Isabel
  • Jiménez Riobóo, R. J.
  • Sanz Lázaro, Jesús
  • Ternane, Riadh
Rhombohedral NASICON compounds with general formula LiTiSc(PO) (0 ≤ x ≤ 0.5) have been prepared using a conventional solid-state reaction and characterized by X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and impedance spectroscopy. The partial substitution of Ti by Sc and Li in pristine LiTi(PO) increases unit-cell dimensions and the number of charge carriers. In Sc-rich samples, the analysis of XRD data andLi/Li,P, andSc MAS NMR spectra confirms the presence of secondary LiScO and LiScPO phases that reduce the amount of lithium incorporated in the NASICON phase. In samples with x < 0.3, electrostatic repulsions between Li ions located at M1 and M3 sites increase Li mobility. For x ≥ 0.3, ionic conductivity decreases because of secondary nonconducting phases formed at grain boundaries of the NASICON particles (core-shell structures). For x = 0.2, high bulk conductivity (2.5 × 10 S·cm) and low activation energy (E = 0.25 eV) measured at room temperature make LiTiSc(PO) one of the best lithium ionic conductors reported in the literature. In this material, the vacancy arrangement enhances Li conductivity., R.K. would like to thank the Tunisian Ministry of Higher Education and Scientific Research for financial support. This work was funded by Spanish MINECO MAT2013-46452-C4-2R and MATERYENER3-CAM (S2013/MIT-2753) projects and the European NANOLICOM (FP7-PEOPLE-2009-IRSES) project.