Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel perovskite oxide chemically designed to show multiferroic phase boundary with room-temperature magnetoelectricity

  • Fernández-Posada, Carmen M.
  • Castro, Alicia
  • Kiat, Jean-Michel
  • Porcher, Florence
  • Peña, Octavio
  • Algueró, Miguel
  • Amorín, Harvey
There is a growing activity in the search of novel single-phase multiferroics that could finally provide distinctive magnetoelectric responses at room temperature, for they would enable a range of potentially disruptive technologies, making use of the ability of controlling polarization with a magnetic field or magnetism with an electric one (for example, voltage-tunable spintronic devices, uncooled magnetic sensors and the long-searched magnetoelectric memory). A very promising novel material concept could be to make use of phase-change phenomena at structural instabilities of a multiferroic state. Indeed, large phase-change magnetoelectric response has been anticipated by a first-principles investigation of the perovskite BiFeO -BiCoO solid solution, specifically at its morphotropic phase boundary between multiferroic polymorphs of rhombohedral and tetragonal symmetries. Here, we report a novel perovskite oxide that belongs to the BiFeO -BiMnO -PbTiO ternary system, chemically designed to present such multiferroic phase boundary with enhanced ferroelectricity and canted ferromagnetism, which shows distinctive room-temperature magnetoelectric responses., This work was supported by Spanish MINECO projects (MAT2014-58816-R and MAT2011-23709). C.M.F-P. thanks financial support of the Spanish FPI Programme (BES 2012-053017)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of discrepancy between electrical and mechanical anomalies in lead-free (K,Na)NbO3 -based ceramics

  • Mazuera, A. M.
  • Silva, P. S.
  • Rodrigues, A. D.
  • Pizani, Paulo S.
  • Romaguera-Barcelay, Y.
  • Venet, Michel
  • Algueró, Miguel
[EN] Ferroelectric polymorphic phase coexistence, associated with either the presence of a morphotropic phase boundary or a temperature-driven polymorphic phase transition, is currently acknowledged as the key to high piezoelectric activity and is searched when new perovskite materials are developed, like lead-free alternatives to state-of-the-art Pb(Zr,Ti)O3. This requires characterization tools that allow phase coexistence and transitions to be readily identified, among which measurements of the temperature dependences of Young's modulus and mechanical losses by dynamical mechanical analysis stand out as a powerful technique to complement standard electrical characterizations. We report here the application of this technique to (K1-xNax)NbO3-based materials, which are under extensive investigation as environmentally friendly high sensitivity piezoelectrics. The elastic anomalies associated with the different phase transitions are identified and are shown to be distinctively shifted in relation to the dielectric ones. The origin of this discrepancy is discussed with the help of temperature-dependent Raman spectroscopy and is proposed to be a characteristic of diffuse phase transitions., The authors would like to thank CAPES and the Sâo Paulo Research Foundation (FAPESP), Grants No. 2012/08457-7 and No. 2013/00134-7, for the financial support. M.A. also acknowledges funding from MINECO through the MAT2014-58816-R Project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Yttrium Iron Garnet/Barium Titanate Multiferroic Composites

  • Schileo, Giorgio
  • Pascual-González, Cristina
  • Algueró, Miguel
  • Reaney, Ian M.
  • Postolache, Petronel
  • Mitoseriu, Liliana
  • Reichmann, Klaus
  • Feteira, Antonio
[EN] Dense multiferroic 0-3 type composites encompassing BaTiO and YFeO were fabricated by the solid-state reaction method. X-ray diffraction data combined with scanning electron microscopy imaging show virtual immiscibility between the two phases, with the YFeO ferrimagnetic phase well dispersed in the tetragonal BaTiO ferroelectric matrix. Raman spectroscopy analyses corroborate the polar nature of the BaTiO matrix in composites with a YFeO content as great as 40 wt%. Ferrimagnetism is detected in all composites and no additional magnetic phases are distinguished. Although these dense ceramics can be electrically poled, they exhibit a very weak magnetoelectric response, which slightly increases with YFeO content., This work was funded by the Christian Doppler Association in cooperation with TDK-EPC (Austria). LM acknowledges the grant PN-II-ID-PCE-2011-3-0745, while MA thanks funding by Spanish MINECO through project MAT2014-58816-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perovskite solid solutions with multiferroic morphotropic phase boundaries and property enhancement

  • Algueró, Miguel
  • Amorín, Harvey
  • Fernández-Posada, Carmen M.
  • Peña, Octavio
  • Ramos, Pablo
  • Vila Pena, Eladio
  • Castro, Alicia
This is an Open Access article published by World Scientific Publishing Company.-- Review., Recently, large phase-change magnetoelectric response has been anticipated by a first-principles investigation of phases in the BiFeO-BiCoO perovskite binary system, associated with the existence of a discontinuous morphotropic phase boundary (MPB) between multiferroic polymorphs of rhombohedral and tetragonal symmetries. This might be a general property of multiferroic phase instabilities, and a novel promising approach for room temperature magnetoelectricity. We review here our current investigations on the identification and study of additional material systems, alternative to BiFeO-BiCoO that has only been obtained by high pressure synthesis. Three systems, whose phase diagrams were, in principle, liable to show multiferroic MPBs have been addressed: the BiMnO-PbTiO and BiFeO-PbTiO binary systems, and the BiFeO-BiMnO-PbTiO ternary one. A comprehensive study of multiferroism across different solid solutions was carried out based on electrical and magnetic characterizations, complemented with mechanical and electromechanical measurements. An in-depth structural analysis was also accomplished when necessary., This work has been funded by Spanish MINECO through the MAT2014-58816-R and MAT2011-2370 projects. C.M.F-P. also acknowledges the financial aid of the Spanish FPI Program (BES 2012-053017). Technical support all along the research by Ms. I. Martínez and Ms. M. M. Antón at ICMM-CSIC is recognized., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Point defect engineering of high temperature piezoelectric BiScO3-PbTiO3 for enhanced voltage response

  • Pascual González, Carmen
  • Berganza, Eider
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
BiScO-PbTiO is the most promising system among high sensitivity piezoelectric BiMO-PbTiO perovskite solid solutions with high Curie temperature, which are under extensive investigation for expanding the operation temperature of state of the art Pb(Zr,Ti)O (PZT) up to 400 °C. The viability of these alternative materials requires the development of specific point defect engineering that allow a range of piezoelectric ceramics comparable to commercial PZTs to be obtained, optimized for the different applications. A distinctive feature of BiMO-PbTiO systems is the simultaneous presence of both Bi and Pb at the A-site of the perovskite. This enables the possibility of introducing charged point defects without incorporating new chemical species, just by defining an A-site non–stoichiometry. In this work, we present a comprehensive study of the effects of Bi substitution for Pb, along with the formulation of Pb vacancies for charge compensation. Results indicate an overall lattice stiffening that yields reduced polarizability and compliance, and dominates over a limited enhancement of the ferroelectric domain wall dynamics, so as a largely enhanced voltage response is obtained. Specifically, BiScO-PbTiO with the A-site non-stoichiometry is shown to be very suitable as the piezoelectric component of magnetoelectric composites for magnetic field sensing., Funded by Spanish MINECO through the MAT2014-58816-R and MAT2011-23709 projects. Technical supports by Ms. I. Martínez and Ms. M. M. Antón are also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Point defect engineering of high temperature piezoelectric BiScO3-PbTiO3 for high power operation

  • Pascual-González, Carmen
  • Berganza, Eider
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
[EN] BiScO3-PbTiO3 is used as a model system of BiMO3-PbTiO3 perovskite solid solutions with enhanced electromechanical response at ferroelectric morphotropic phase boundaries, and high Curie temperature to demonstrate specific point defect engineering for high power operation. The objective is to obtain a range of piezoelectric ceramics comparable to hard Pb(Zr,Ti)O3 materials, optimized for the different applications. In this work, a comprehensive study of Mn substitution for Sc is provided. Care is taken to isolate the effects of the point defects from those of concomitant structural and microstructural changes that have been previously described after MnO2 addition. Results strongly suggest that Mn substitution results in the formation of (MnSc'-VO••) dipolar complexes that effectively clamp domain walls. This is the same mechanism responsible of hardening in Pb(Zr,Ti)O3. Indeed, Bi0.36Pb0.64Sc0.36-x MnxTi0.64O3 with x=0.02 is shown to be a high sensitivity piezoelectric with strongly reduced losses, suitable for high power operation between 200 and 400 ºC., Funded by Spanish MINECO through the MAT2014-58816-R and MAT2011-23709 projects. Technical supports by Ms. I. Martínez and Ms. M. M. Antón are also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Insights into the Performance of Magnetoelectric Ceramic Layered Composites

  • Ramos, Pablo
  • Amorín, Harvey
  • Ricote, J.
  • Castro, Alicia
  • Algueró, Miguel
Finite element analysis is used to simulate the magnetoelectric response of magnetostrictive-piezoelectric NiFe2O4-Bi0.36Pb0.64Sc0.36Ti0.64O3 ceramic two-layer, three-layer, and multilayer structures considering finite geometry and introducing the conductivity of the magnetic component. Results are compared with those obtained with existing approximate analytical solutions, and with the experimental data available for high-quality layered composites. Limitations of the widely used analytical solution for a bilayer are revealed, and the reported good agreement with experimental coefficients is shown to be coincidental. Magnetoelectric coefficients obtained by simulation using realistic material parameters are systematically above the experimental values for three-layer and multilayer composites. Possible mechanisms for the reduction in response are analyzed. Strain relaxation across the piezoelectric layer, strongly associated with its mechanical performance, is shown to be the most feasible cause., This work was funded by Spanish MINECO through grant MAT2014-58816-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanosynthesis of the Whole Y1−xBixMn1−xFexO3 Perovskite System: Structural Characterization and Study of Phase Transitions

  • Quintana-Cilleruelo, Jose Ángel
  • Veerapandiyan, Vignaswaran K.
  • Deluca, Marco
  • Algueró, Miguel
  • Castro, Alicia
Perovskite BiFeO3 and YMnO3 are both multiferroic materials with distinctive magnetoelectric coupling phenomena. Owing to this, the Y1xBix Mn1xFexO3 solid solution seems to be a promising system, though poorly studied. This is due to the metastable nature of the orthorhombic perovskite phase of YMnO3 at ambient pressure, and to the complexity of obtaining pure rhombohedral phases for BiFeO3-rich compositions. In this work, nanocrystalline powders across the whole perovskite system were prepared for the first time by mechanosynthesis in a high-energy planetary mill, avoiding high pressure and temperature routes. Thermal decomposition temperatures were determined, and structural characterization was carried out by X-ray powder diffraction and Raman spectroscopy on thermally treated samples of enhanced crystallinity. Two polymorphic phases with orthorhombic Pnma and rhombohedral R3c h symmetries, and their coexistence over a wide compositional range were found. A gradual evolution of the lattice parameters with the composition was revealed for both phases, which suggests the existence of two continuous solid solutions. Following bibliographic data for BiFeO3, first order ferroic phase transitions were located by differential thermal analysis in compositions with x 0.9. Furthermore, an orthorhombic-rhombohedral structural evolution across the ferroelectric transition was characterized with temperature-dependent X-ray diffraction., This work has been funded by the MICINNU (Spain) through the MAT2014-58816-R and MAT2017-88788-R projects. Jose Ángel Quintana-Cilleruelo is grateful for the financial support by the Spanish MINECO (BES-2015-072595). Vignaswaran K. Veerapandiyan and Marco Deluca gratefully acknowledge support from the Austrian Science Fund (FWF): Proyect P29563-N36., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced piezomagnetic coefficient of cobalt ferrite ceramics by Ga and Mn doping for magnetoelectric applications

  • Santa-Rosa, Washington
  • da-Silva, Jr. Paulo Sergio
  • M’Peko, Jean-Claude
  • Amorín, Harvey
  • Algueró, Miguel
  • Venet, Michel
See the supplementary material for XRD patterns and SEM micrographs of CFG and CFM compositions. [ftp://ftp.aip.org/epaps/journ_appl_phys/E-JAPIAU-125-083908], [EN] The magnetic, magnetostrictive, and electrical properties of Ga- and Mn-doped cobalt ferrite are reported as a function of composition. Materials with improved functionality for magnetoelectric composites are obtained. Magnetic characterizations reveal the effectiveness of the dopants to reduce the typically high magneto-crystalline anisotropy of cobalt ferrite and significantly enhance piezomagnetic coefficients. CoGa0.15Fe1.85O4 ceramic shows large effective piezomagnetic coefficient q11, 3.9 × 10−6 kA−1 m, which is among the highest values reported for cobalt ferrite-based ceramics. Additionally, a two order of magnitude increase of resistivity is found after doping, which makes this material specially suitable for particulate composites. On the contrary, CoMn0.25Fe1.75O4 ceramic has the highest value of q11+q21 (∼1.9 × 10−6 kA−1 m), which is the relevant parameter for laminated composites. Analytical calculations of the transverse magnetoelectric coefficient αE31 for bilayers containing these optimized magnetostrictive phases are also reported, and they demonstrate their high potential for developing new magnetoelectric composites., The research was co-funded by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Brasil (CAPES) —Finance Code 001 (Process No. 8881.030500/2013-01), São Paulo Research Foundation FAPESP (Grant Nos. 2013/00134-7and 2017/17872-1), and Spanish MINECO (Project Nos. MAT2014-58816-R and MAT2017-88788-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Processing issues and their influence in the magnetoelectric performance of (K,Na)NbO3/CoFe2O4-based layered composites

  • Santa-Rosa, Washington
  • Venet, Michel
  • M’Peko, Jean-Claude
  • Amorín, Harvey
  • Algueró, Miguel
Low temperature processing of environmentally-friendly (K,Na)NbO- and CoFeO-based layered composites has been accomplished by hot pressing, and their electrical, piezoelectric and magnetoelectric properties have been characterized. High quality composite three-layer CoFeO/KNaNbO/CoFeO structures with defect-free interfaces were obtained by hot pressing at only 1000 °C, when highly reactive CoFeO powders obtained by Pechini were used. Negligible chemical reactions at interfaces or interdiffusion across them took place during processing, while alkali volatilization was minimized. Dense, crack-free CoFeGaO/(KNa)LiNbTaO/CoFeGaO structures incorporating phases with enhanced piezoresponses have been also obtained, though in this case magnetoelectric coefficients were lower than expected. This is shown to be related with the presence of a core-shell type microstructure within the piezoelectric layer characteristic of (KNa)LiNbTaO, which is stabilized by the low temperature processing. Procedures for further enhancement of the magnetoelectric response are proposed., Research funded by Brazilian PVE/CAPES (process88881.030500/2013-01) and grant #2013/00134-7 Sao Paulo Research Foundation (FAPESP) and by Spanish MINECO through projects MAT2014-58816-R and MAT2017-88788-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmentally-friendly magnetoelectric ceramic multilayer composites by water-based tape casting

  • Santa-Rosa, Washington
  • Venet, Michel
  • M'Peko, Jean-Claude
  • Moreno, Rodrigo
  • Amorín, Harvey
  • Algueró, Miguel
Supplementary data associated with this article can be found, in theonline version, at: https://doi.org/10.1016/j.jeurceramsoc.2018.10.009, Magnetoelectric composites are an enabling material technology for a range of novel devices like electrically-tunable magnetic microwave components or room-temperature-operation high-sensitivity magnetic sensors. Among the different approaches under development, cofired ceramic layered composites provide large effective magnetoelectric coefficients and improved reliability. However, miniaturization and processing up-scaling remain an issue. This can be addressed by using tape casting technology to prepare multilayer structures, as it is industrially done for multilayer ceramic capacitors. We report here the processing of ceramic multilayer composites of environmentally-friendly piezoelectric (KNa)LiNbTaO and magnetostrictive CoFeMnO by water-based tape casting. Dense ceramic multilayers with high quality interfaces were obtained, and their functional response characterized. Effects of the multilayer geometry, characterized by ceramic layer thickness of tens of microns and large number of layers, have been defined. A distinctive enhancement of functionality as compared with conventionally-prepared layered structures is demonstrated and related to strain/stress relaxation characteristics across layers., Research co-funded by the Coordenação de Aperfeiçoamento dePessoal de Nível Superior–Brasil (CAPES)–Finance Code 001 (process88881.030500/2013-01), São Paulo Research Foundation FAPESP(grants #2013/00134-7 and #2017/17872-1), and Spanish MINECO (projects MAT2014-58816-R and MAT2017-88788-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of Kittel type behaviour of the permittivity of a nanostructured high sensitivity piezoelectric

  • Balciunas, Sergejus
  • Ivanov, Maksim
  • Grigalaitis, Robertas
  • Banys, Juras
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
The broadband dielectric properties of high sensitivity piezoelectric 0.36BiScO-0.64PbTiO ceramics with average grain sizes from 1.6 μm down to 26 nm were investigated in the 100-500 K temperature range. The grain size dependence of the dielectric permittivity was analysed within the effective medium approximation. It was found that the generalised core-shell (or brick wall) model correctly explains the size dependence down to the nanoscale. For the first time, the grain bulk and boundary properties were obtained without making any assumptions of values of the parameters or simplifications. Two contributions to dielectric permittivity of the grain bulk are described. The first is the size-independent one, which follows the Curie-Weiss law. The second one is shown to plausibly follow the Kittel's law. This seems to suggest the unexpected persistence of mobile ferroelectric domains at the nanoscale (26 nm grains). Alternative explanations are discussed., This work was supported by project TUMOCS. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie [Grant Agreement No. 645660]. Financial support of the Spanish MINECO (Project Nos. MAT2014-58816-R and MAT2017-88788-R) and the collaboration in the frame of COST MP0904 Action are highly acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiferroic and magnetoelectric properties of Pb0.99[Zr0.45Ti0.47(Ni1/3Sb2/3)0.08]O3–CoFe2O4 multilayer composites fabricated by tape casting

  • Schileo, Giorgio
  • Pascual-González, Cristina
  • Algueró, Miguel
  • Reaney, Ian M.
  • Postolache, Petronel
  • Mitoseriu, Liliana
  • Reichmann, Klaus
  • Venet, Michel
  • Feteira, Antonio
A 2-2 type multiferroic composite device encompassing three CoFeO (CFO) layers confined between four Pb[ZrTi(NiSb)]O (PZT) layers was fabricated by tape casting. X-ray diffraction data showed good chemical compatibility between the two phases, whereas Scanning Electron Microscopy imaging also revealed an intimate contact between CFO and PZT layers. Under an applied electric field of 65 kV/cm, this multilayer device shows a saturated polarisation of 7.5 μC/cm and a strain of 0.12%, whereas under a magnetic field of 10 kOe it exhibits a typical ferromagnetic response and a magnetic moment of 33 emu/g. This device can be electrically poled, after which it exhibits magnetoelectric coupling., The authors would like to thank thefinancial support of theChristian Doppler Research Association and of EPCOS OHG, a TDKgroup company. MA thanks funding by Spanish MINECO through pro-ject MAT2014-58816-R. AF acknowledges SHU’s Strategic Research Infrastructure Fund for the acquisition of the AixACCT system., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Polar/Antipolar Phase Boundary of BiMnO3–BiFeO3–PbTiO3: Interplay among Crystal Structure, Point Defects, and Multiferroism

  • Fernández-Posada, Carmen M.
  • Castro, Alicia
  • Kiat, Jean-Michel
  • Porcher, Florence
  • Peña, Octavio
  • Jiménez, Ricardo
  • Algueró, Miguel
  • Amorín, Harvey
The ferromagnetic perovskite oxide BiMnO is a highly topical material, and the solid solutions it forms with antiferromagnetic/ferroelectric BiFeO and with ferroelectric PbTiO result in distinctive polar/nonpolar morphotropic phase boundaries (MPBs). The exploitation of such a type of MPBs could be a novel approach to engineer novel multiferroics with phase-change magnetoelectric responses, in addition to ferroelectrics with enhanced electromechanical performance. Here, the interplay among crystal structure, point defects, and multiferroic properties of the BiMnO–BiFeO–PbTiO ternary system at its line of MPBs between polymorphs of tetragonal P4mm (polar) and orthorhombic Pnma (antipolar) symmetries is reported. A strong dependence of the phase coexistence on thermal history is found: phase percentage significantly changes whether the material is quenched or slowly cooled from high temperature. The origin of this phenomenon is investigated with temperature-dependent structural and physical property characterizations. A major role of the complex defect chemistry, where a Bi/Pb-deficiency allows Mn and Fe ions to have a mixed-valence state, in the delicate balance between polymorphs is proposed, and its influence in the magnetic and electric ferroic orders is defined., This work was supported by the Spanish MINECO through projects MAT2014‐58816‐R and MAT2017‐88788‐R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Delicate Balance among Three Ferroic Polymorphic Phases in BiFeO3-BiMnO3-PbTiO3

  • Fernández-Posada, Carmen M.
  • Castro, Alicia
  • Peña, Octavio
  • Algueró, Miguel
  • Amorín, Harvey
Phase-change functional responses can be obtained in perovskite solid solutions at structural instabilities involving multiferroic states, a very promising approach for realizing magnetoelectric effects at room temperature. A line of multiferroic morphotropic phase boundaries (MPBs) has been described within the phase diagram of the BiFeO-BiMnO-PbTiO ternary system, in which an evolution from Cc/P4mm-type (polar/polar) to Pnma/P4mm-type (antipolar/polar) MPBs takes place. Coexistence of the three polymorphs results in a small region, where distinctive phase-change magnetoelectric responses are anticipated. In this work, all three polymorphs were obtained, either isolated or in phase coexistence with varying percentages, by tailoring the cooling profile after high-temperature annealing in a small compositional range. The perovskite structure was characterized, and temperature-dependent magnetic and electrical characterizations were carried out to define the ferroic orders and crystal physicochemical properties of the three polymorphs. Results revealed the close interplay among the crystal structure, point defects, and multiferroism in this small region, where the delicate balance among the three polymorphs is shown. Additionally, the effect of size reduction across the submicron range, down to the nanoscale, is described and discussed., Funded by Spanish MINECO through projects MAT2014-58816-R and MAT2017-88788-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling colloidal processing of (K,Na)NbO3-based materials in aqueous medium

  • Venet, Michel
  • Santa-Rosa, Washington
  • M'Peko, Jean-Claude
  • Amorín, Harvey
  • Algueró, Miguel
  • Moreno, Rodrigo
[EN] K0:5Na0:5NbO3-based materials are serious candidates to replace leadbased piezoceramics since they show excellent electrical and piezoelectric properties. The tape casting technique can be used to obtain highly textured KNN-based ceramics; however, despite industrial and environmental advantages of water-based processing, there are not reports about the control of colloidal processing conditions to obtain optimized K0:5Na0:5NbO3-based slurries in aqueous medium. This paper reports a procedure for controlling colloidal stability and rheological behavior of aqueous (K0:5Na0:5)0:97Li0:03Nb0:8Ta0:2O3 suspensions. Zeta potential and cationic solubility measurements as a function of pH showed that pH 8.5 is adequate for concentrated suspensions, while ow curves analysis allowed optimizing processing parameters, such as, powder content, amount of de occulant and binder, and sonication time. Optimized colloidal suspensions were prepared and used to obtain high quality tapes. Processed ceramics from these stacked tapes show equivalent properties to those processed directly from powders, which demonstrates the effectiveness of the colloidal route reported here., Research co-funded by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES) - Finance Code 001 (process 88881.030500/2013-01), Sao Paulo Research Foundation FAPESP (grants#2013/00134-7 and #2017/17872-1), and Spanish MINECO (projects MAT2014-58816-R, MAT2015-67586-CR-2-R, and MAT2017-88788-R).