Pasar al contenido principal

NANODISPOSITIVOS PARA LA CARACTERIZACION TERMICA Y EN FRECUENCIA DE LA DINAMICA DE PAREDES DE DOMINIO MAGNETICO EXCITADAS CON CORRIENTES POLARIZADAS DE ESPIN.

MAT2014-52477-C5-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the thermal contact resistance in current-induced domain wall depinning

  • López López, Cristina
  • Ramos, Eduardo
  • Muñoz Sánchez, Manuel
  • Kar-Narayan, S.
  • Mathur, N. D.
  • Prieto, J. L.
In this work we study the influence of the thermal contact resistance on the temperature of a typical nanostripe used in current induced magnetic domain wall movement or depinning. The thermal contact resistance arises from an imperfect heat transport across the interface between the metallic ferromagnetic nanostripe and the substrate. We show that this parameter, which is likely non-zero in any experimental device, increases the temperature in the nanostripe considerably. When the current is injected in the nanostripe in nanosecond long pulses, the larger temperature also implies a reduction of the effective current density delivered by the pulse generator. Both the thermal contact resistance and the dynamic response of the pulse generator are usually neglected in theoretical estimations of the influence of spin transfer torque on domain wall displacement and depinning. Here we show that only if the thermal contact resistance and the electric resistivity of the ferromagnetic nanostripe are optimized to the best values reported in the bibliography, the Joule heating may not be so crucial for current densities of the order of 108 A cm−2. Also, the use of physical constrictions (notch) to pin the magnetic domain wall may complicate the interpretation of the results as they always come together with relevant thermal gradients., This work has been partially funded by the Spanish Ministerio de Economía y Competitividad through the projects MAT2014-52477-C5-1-P and MAT2014-52477-C5-3-P and by the Engineering and Physical Sciences Research Council through grant code EPSRC EP/E03389X., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous exchange bias formation driven by a structural phase transition in the antiferromagnetic material

  • Migliorini, Andrea
  • Kuerbanjiang,Balati
  • Huminiuc, T.
  • Kepaptsoglou, Demie
  • Muñoz Sánchez, Manuel
  • Cuñado, J. L. F.
  • Camarero, Julio
  • Aroca, C.
  • Vallejo-Fernández, Gonzalo
  • Lazarov, Vlado
  • Prieto, J. L.
Most of the magnetic devices in advanced electronics rely on the exchange bias effect, a magnetic interaction that couples a ferromagnetic and an antiferromagnetic material, resulting in a unidirectional displacement of the ferromagnetic hysteresis loop by an amount called the ‘exchange bias field’. Setting and optimizing exchange bias involves cooling through the Néel temperature of the antiferromagnetic material in the presence of a magnetic field. Here we demonstrate an alternative process for the generation of exchange bias. In IrMn/FeCo bilayers, a structural phase transition in the IrMn layer develops at room temperature, exchange biasing the FeCo layer as it propagates. Once the process is completed, the IrMn layer contains very large single-crystal grains, with a large density of structural defects within each grain, which are promoted by the FeCo layer. The magnetic characterization indicates that these structural defects in the antiferromagnetic layer are behind the resulting large value of the exchange bias field and its good thermal stability. This mechanism for establishing the exchange bias in such a system can contribute towards the clarification of fundamental aspects of this exchange interaction., This work has been funded by the Spanish Ministerio de Economía y Competitividad through the projects MAT2014-52477-C5-1-P and MAT2014-52477-C5-3-P and by the Spanish Consejo Social of the Universidad Politécnica de Madrid through the scholarship ‘Ayuda del Consejo Social para el Fomento de la formación y la Internacionalización de Doctorandos’, awarded for a three months internship at the University of York. V.K.L. thanks the funding support by EPSRC grant EP/K03278X/1. J.C. and J.L.F.C. thank support by MINECO through Projects FIS2016-78591-C3-1-R and SEV-2016-0686 and by Comunidad de Madrid through Project S2013/MIT-2850, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation of a topologically protected state in a magnetic domain wall stabilized by a ferromagnetic chemical barrier

  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Aballe, Lucía
  • Proenca, Mariana P.
  • Lucas, Irene
  • Prieto, J.L.
  • Mascaraque, Arantzazu
  • de la Figuera, Juan
  • Quesada, Adrián
  • Pérez, Lucas
6 pags, 4 figs, The precise control and stabilization of magnetic domain walls is key for the development of the next generation magnetic nano-devices. Among the multitude of magnetic configurations of a magnetic domain wall, topologically protected states are of particular interest due to their intrinsic stability. In this work, using XMCD-PEEM, we have observed a topologically protected magnetic domain wall in a ferromagnetic cylindrical nanowire. Its structure is stabilized by periodic sharp alterations of the chemical composition in the nanowire. The large stability of this topologically protected domain wall contrasts with the mobility of other non-protected and non-chiral states also present in the same nanowire. The micromagnetic simulations show the structure and the conditions required to find the topologically protected state. These results are relevant for the design of future spintronic devices such as domain wall based RF oscillators or magnetic memories., This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects MAT2014-52477-C5-1-P, 2-P, MAT2015-64110-C2-1-P, 2-P and MAT2017-87072-C4-2-P and by Portuguese FCT and COMPETE 2020, under project POCI-01-0145-FEDER-028676. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). MPP acknowledges FCT for grant SFRH/BPD/84948/2012. SRG acknowledges MINECO for FPI fellowship.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Observation of a topologically protected state in a magnetic domain wall stabilized by a ferromagnetic chemical barrier

  • Ruiz-Gomez, S.
  • Foerster, M.
  • Aballe, L.
  • Proenca, M.P.
  • Lucas, I.
  • Prieto, J.L.
  • Mascaraque, A.
  • de la Figuera, J.
  • Quesada, A.
  • Perez, L.
The precise control and stabilization of magnetic domain walls is key for the development of the next generation magnetic nano-devices. Among the multitude of magnetic configurations of a magnetic domain wall, topologically protected states are of particular interest due to their intrinsic stability. In this work, using XMCD-PEEM, we have observed a topologically protected magnetic domain wall in a ferromagnetic cylindrical nanowire. Its structure is stabilized by periodic sharp alterations of the chemical composition in the nanowire. The large stability of this topologically protected domain wall contrasts with the mobility of other non-protected and non-chiral states also present in the same nanowire. The micromagnetic simulations show the structure and the conditions required to find the topologically protected state. These results are relevant for the design of future spintronic devices such as domain wall based RF oscillators or magnetic memories.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Observation of a topologically protected state in a magnetic domain wall stabilized by a ferromagnetic chemical barrier

  • Ruiz-Gómez, Sandra|||0000-0002-9665-2059
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Proença, Mariana P.
  • Lucas del Pozo, Irene
  • Prieto, José Luis|||0000-0003-2298-2714
  • Mascaraque, Arantzazu
  • Figuera, Juan de la|||0000-0002-7014-4777
  • Quesada, Adrian
  • Pérez, Lucas|||0000-0001-9470-7987
The precise control and stabilization of magnetic domain walls is key for the development of the next generation magnetic nano-devices. Among the multitude of magnetic configurations of a magnetic domain wall, topologically protected states are of particular interest due to their intrinsic stability. In this work, using XMCD-PEEM, we have observed a topologically protected magnetic domain wall in a ferromagnetic cylindrical nanowire. Its structure is stabilized by periodic sharp alterations of the chemical composition in the nanowire. The large stability of this topologically protected domain wall contrasts with the mobility of other non-protected and non-chiral states also present in the same nanowire. The micromagnetic simulations show the structure and the conditions required to find the topologically protected state. These results are relevant for the design of future spintronic devices such as domain wall based RF oscillators or magnetic memories.