Pasar al contenido principal

PATRONES MICROMETRICOS NANOESTRUCTURADOS FABRICADOS MEDIANTE TECNICAS DE HACES DE IONES PARA LA OPTIMIZACION DEL POTENCIAL REGENERATIVO DE CELULAS OSEAS

MAT2014-54826-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoporous silicon-based surface patterns fabricated by UV laser interference techniques for biological applications

  • Recio-Sánchez, Gonzalo
  • Peláez, Ramón J.
  • Vega, Fidel
  • Martín-Palma, Raúl J.
8 págs.; 8 figs., The fabrication of selectively functionalized micropatterns based on nanostructured porous silicon (nanoPS) by phase mask ultraviolet laser interference is presented here. This single-step process constitutes a flexible method for the fabrication of surface patterns with tailored properties. These surface patterns consist of alternate regions of almost untransformed nanoPS and areas where nanoPS is transformed into Si nanoparticles (Si NPs) as a result of the laser irradiation process. The size of the transformed areas as well as the diameter of the Si NPs can be straightforwardly tailored by controlling the main fabrications parameters including the porosity of the nanoPS layers, the laser interference period areas, and laser fluence. The surface patterns have been found to be appropriate candidates for the development of selectively-functionalized surfaces for biological applications mainly due to the biocompatibility of the untransformed nanoPS regions. © 2016 IOP Publishing Ltd, The authors gratefully acknowledge funding from Ministerio de Economía y Competitividad (Spain) under research projects MAT2013-46572-C2-1-R and MAT2014-54826-C2-1-R. R P acknowledges the grant JCI-2012_13034 from the Juan de la Cierva program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lattice damage in 9-MeV-carbon irradiated diamond and its recovery after annealing

  • Agulló Rueda, F.
  • Gordillo, N.
  • Ynsa, M. D.
  • Maira-Vidal, Aránzazu
  • Cañas, J.
  • Ramos, M. A.
We have studied the radiation damage in diamond as a function of layer depth upon self-ion implantation with 9-MeV carbon ions and its recovery after annealing at 1000◦C. Raman and photoluminescence spectra show substantial damage of the lattice, namely, amorphization, neutral vacancies, and interstitial defects. Damage is maximum in the stopping layer at a depth of 4 μm. After annealing there is some recovery of the lattice, but the residual damage increases with fluence, up to about 2×10^16 ions/cm2. At this fluence the stopping layer becomes highly disordered and does not heal with annealing. Surprisingly, for higher fluence values, of about 5×10^16 ions/cm2, there is almost no residual damage. After full amorphization is reached, the layers appear to recrystallize by solid phase epitaxy (SPE), using the pristine diamond layers underneath as a template. These results prove that graphitization of diamond after annealing can be avoided in deeply buried layers, implanted at fluences much higher than expected. High fluences, in fact, can lead to high quality diamond layers. If SPE can be confirmed, it would have a great interest for diamond device applications, as it allows for higher doping levels., We thank the technical staff of CMAM for operating the tandem ion-beam accelerator. Funding: This work was supported by the Ministerio de Economía y Competitividad (MINECO), Spain [MAT2014-57547-R, MAT2014-54826-C2-1-R, FIS2014-54498-R, and CTQ-2014-53334-C2-2-R], the María de Maeztu Program for Units of Excellence in R&D [MDM-2014-0377], and the Comunidad Autónoma de Madrid [NANOFRONTMAG-CM (S2013/MIT-2850)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro-Raman spectroscopy of near-surface damage in diamond irradiated with 9-MeV boron ions

  • Agulló Rueda, F.
  • Ynsa, M. D.
  • Gordillo, N.
  • Maira-Vidal, Aránzazu
  • Moreno-Cerrada, D.
  • Ramos, M. A.
We have studied the near-surface damage in a diamond crystal caused by irradiation with swift boron ions and its healing after high-temperature annealing. A diamond crystal was irradiated with 9-MeV 11B3+ ions with fluence values between 1×10^15 and 4.42×10^16 ions/cm2 to generate various levels of lattice damage. The ions loose energy to the lattice and, according to simulations, stop at a depth of about 5 μm, where they form a thin buried implantation layer. For the near-surface layers damage is produced by the ions at high kinetic energy before they slow down. Only intrinsic defects can be produced, with no boron atoms. The lattice damage of the near-surface layers and its recovery after annealing for 1 h at 1000°C were studied by Raman and photoluminescence spectroscopies. Back-scattered light from a 514.5-nm laser beam was collected from the sample surface, probing a depth of a few micrometers. We observe some disordering of the lattice plus the formation of neutral vacancies, interstitial and other lattice defects. After annealing the Raman spectrum shows a significant recovery of the lattice order and the disappearance of isolated neutral vacancies. Residual damage is confirmed by the luminescence spectrum, that shows the appearance of new spectral features., This work was supported by the Ministerio de Economía y Competitividad (MINECO), Spain [ MAT2014-57547-R,MAT2014-54826-C2-1-R, andFIS2014-54498-R], the María de Maeztu Program for Units of Excellence in R&D [ MDM-2014-0377], and the Comunidad Autónoma de Madrid [ NANOFRONTMAG-CM (S2013/MIT-2850)]. Research by N. G. is supported by MINECO [JCI-2012-12652]., Peer-reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct laser writing of nanorough cell microbarriers on anatase/Si and graphite/Si

  • Xiang, Y. C.
  • Martínez-Martínez, R. M.
  • Torres-Costa, Vicente
  • Agulló Rueda, F.
  • García-Ruiz, J. P.
  • Manso-Silván, Miguel
The formation of hierarchical structures consisting of microstripe barriers decorated with nanorough ablated materials prepared by direct laser writing is described. Linear features of circa 25 μm width and 12 μm height are achieved on amorphous and crystalline titania and graphitic carbon films deposited on silicon. Ablated protrusions build up barriers decorated by nanoscale Si-film reconstructions, as indicated by EDX maps and micro-Raman spectroscopy. Wettability tests show a dramatic change in water contact angle, which leads to almost full wetting after irradiation, irrespective of the original film composition. Fluorescence microscopy images of human mesenchymal stem cells cultured on 1D and 2D structures demonstrate the short term biocompatibility of the ablated surfaces. It is shown that cells adhere, extend and polarize on feature edges, independently of the type of surface, thus suggesting that the created nanoroughness is at the origin of the antifouling behavior. In particular, irradiated anatase and graphite surfaces demonstrate an increased performance of crystalline films for the creation of cell guiding and trapping devices. The results suggest that such laser processing of films may serve as a time-and-cost-efficient method for the design of few-cells analytical surfaces., Funding through grant MAT2014-54826-C2-1-R from Ministerio de Economía y Competitividad is greatly appreciated.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of the effects of focused high-energy boron ion implantation in diamond

  • Ynsa, M. D.
  • Agulló Rueda, F.
  • Gordillo, N.
  • Maira-Vidal, Aránzazu
  • Moreno-Cerrada, D.
  • Ramos. M. A.
Boron-doped diamond is a material with a great technological and industrial interest because of its exceptional chemical, physical and structural properties. At modest boron concentrations, insulating diamond becomes a p-type semiconductor and at higher concentrations a superconducting metal at low temperature. The most conventional preparation method used so far, has been the homogeneous incorporation of boron doping during the diamond synthesis carried out either with high-pressure sintering of crystals or by chemical vapour deposition (CVD) of films. With these methods, high boron concentration can be included without distorting significantly the diamond crystalline lattice. However, it is complicated to manufacture boron-doped microstructures. A promising alternative to produce such microstructures could be the implantation of focused high-energy boron ions, although boron fluences are limited by the damage produced in diamond. In this work, the effect of focused high-energy boron ion implantation in single crystals of diamond is studied under different irradiation fluences and conditions. Micro-Raman spectra of the sample were measured before and after annealing at 1000°C as a function of irradiation fluence, for both superficial and buried boron implantation, to assess the changes in the diamond lattice by the creation of vacancies and defects and their degree of recovery after annealing., The authors wish to thank the technical staff of CMAM for operating the tandem accelerator and the Ministerio de Economía y Competitividad (MINECO) for funding this work (Projects MAT2014-54826-C2-1-R, MAT2014-57547-R and FIS2014-54498-R). Research by NG is supported by the MINECO under the project JCI-2012-12652. MINECO/ICTI2013-2016/MAT2014-57547-R MINECO/ICTI2013-2016/FIS2014-54498-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of the formation mechanism of hierarchical silicon structures produced by sequential ion beam irradiation and anodic etching

  • Punzón-Quijorna, Esther
  • Kajari-Shröder, Sarah
  • Agulló Rueda, F.
  • Manso-Silván, Miguel
  • Martín-Palma, Raúl J.
  • Herrero, Pilar
  • Torres-Costa, Vicente
  • Climent-Font, Aurelio
The formation of micropatterns combining nanostructured (porous) Si (NPSi) and bulk Si is induced by a sequential process of selective high energy ion irradiation and anodic etching. In this work, we investigate the microstructural origin of the increase of Si resistivity on irradiated areas, which is responsible for the inhibition of NPSi formation upon anodization. The increase of Si resistivity after irradiation at variable fluence has been evidenced from current voltage (I-V) characteristics. Microstructural aspects of the Si interfaces irradiated with 1.5–20 MeV Si ions have been revealed by elastic backscattering experiments in channeling configuration, Raman spectroscopy and high resolution transmission electron microscopy. It is concluded that inhibition of NPSi formation is induced at fluences that do not imply amorphization. In fact, the analysis of electrochemical capacitance-voltage measurements suggests that, at fluences well below the threshold for lattice disruption, the concentration of holes suffers from a drastic decrease at depths that match the location of maximum damage yield of the implanted Si ions. These results suggest that the mechanism responsible of formation of hierarchical Si structures is the local B dopant deactivation in the irradiated areas.https://doi.org/10.1016/j.vacuum.2016.10.011, This research was partially funded through grant MAT2014-54826- C2-1- R from Ministerio de Economía y Competitividad.