Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rapid-Scan Operando Infrared Spectroscopy

  • Davó-Quiñonero, Arantxa
  • Bueno López, Agustín
  • Lozano-Castello, Dolores
  • McCue, Alan J.
  • Anderson, James A.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Novel methodology, referred to as rapid-scan operando, has been demonstrated to be a highly powerful tool for studying reaction mechanisms in heterogeneous catalysis, because it combines rapid scan for IR monitoring in the milliseconds time frame and operando methodology. As proof of concept, the NOx–CO and NOx–H2 reactions were studied as model catalyzed reactions with practical interest for removal of NOx in diesel exhausts. Rapid-scan operando experiments confirmed state-of-the-art knowledge concerning the reaction mechanisms and, more importantly, allowed us to elucidate, for the first time, the different roles of the surface hydroxy groups depending on the reductant used (CO or H2). Moreover, this new tool was used to distinguish the behavior of carbonates and nitrites under reaction conditions that could not be monitored by conventional IR spectroscopy approaches owing to overlap of their absorbance bands.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Templated Synthesis of Pr-Doped Ceria with Improved Micro and Mesoporosity Porosity, Redox Properties and Catalytic Activity

  • Davó-Quiñonero, Arantxa
  • González Mira, Jorge
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A Ce0.9Pr0.1O2 catalyst has been prepared using nitrates as metal precursors, which have been infiltrated into a polymethylmethacrylate colloidal crystal template and calcined at 500 °C. Its catalytic activity for CO oxidation (4.3 μmolCO s−1 gcatalyst −1 at 300 °C) is far superior compared to a reference catalyst prepared in the same way but without the template (1.4 μmolCO s−1 gcatalyst −1 at 300 °C), and even superior to a three dimensionally ordered macroporous (3DOM) catalyst prepared forming metal citrates to obtain the macroporous structure into the template (0.7 μmolCO s−1 gcatalyst −1 at 300 °C). It is demonstrated that infiltration of nitrates into the colloidal crystal template is more positive for catalytic oxidation of CO than formation of the 3DOM structure using citrates, despite the collapse of the macroporous structure. The 3DOM catalyst prepared with citrates has lower surface area (51 m2 g−1) than catalysts prepared using nitrates (118 and 87 m2 g−1 for the infiltrated and non infiltrated catalysts, respectively). The infiltrated catalyst prepared with nitrates reaches the highest surface area, and also develops more micro and mesoporosity and presents smaller crystallite size (8 vs. 16 nm) than the counterpart non infiltrated catalyst. In addition, the population of oxygen vacancies is also much higher in the infiltrated catalyst prepared with nitrates, and it is postulated that this improves oxygen mobility into the mixed oxide lattice and favors the catalyst reduction. On the contrary, it has been ruled out any effect of the infiltration step in the insertion of Pr cations into the ceria lattice.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Unexpected stability of CuO/Cryptomelane catalyst under Preferential Oxidation of CO reaction conditions in the presence of CO2 and H2O

  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The catalytic activity of CuO/Cryptomelane for the preferential oxidation of CO in H2-rich streams has been studied in the absence and presence of H2O and CO2, paying special attention to the catalyst stability and to changes on its physical-chemical properties under CO-PROX reaction conditions. For fresh CuO/cryptomelane catalyst, the presence of CO2 and/or H2O in the CO-PROX feed partially inhibits CO oxidation due to chemisorption of H2O and CO2 on the catalyst. H2O chemisorption on CuO/Cryptomelane is stronger than CO2 chemisorption, and simultaneous CO2 and H2O adsorption has a synergetic effect that enhances co-adsorption and significantly hinders CO oxidation. On the contrary, the presence of CO2 + H2O in the CO-PROX reaction mixture has a positive effect in the CuO/Cryptomelane stability upon several consecutive reaction cycles in the 25–200 °C range. XRD showed that chemisorbed CO2 + H2O species partially prevent the catalyst deactivation due to cryptomelane reduction to hausmannite (Mn3O4) under the strongly reductive environment of the CO-PROX reaction, and H2-TPR and Raman spectroscopy characterisation support that the cryptomelane structure is less damaged under CO-PROX conditions in the presence of CO2 and H2O than in the absence of these species. Therefore, interestingly under CO2 + H2O environment (realistic CO-PROX conditions) CuO/Cryptomelane catalyst performs an improved catalytic activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Macroporous carrier-free Sr-Ti catalyst for NOx storage and reduction

  • Alcalde-Santiago, Virginia
  • Davó-Quiñonero, Arantxa
  • Such-Basañez, Ion
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A novel concept is presented, consisting of a macroporous carrier-free catalyst. As a proof of concept, a novel Cu-containing Sr-Ti NSR catalyst with a macroporous network has been synthesized, and its maximum NOx storage capacity (1500 μmolNOx/gcatalyst) significantly surpasses that of conventional Pt/Ba/Al2O3 formulations (∼600–800 μmolNOx/gcatalyst). This high NOx storage capacity is achieved because the active phases (mainly SrCO3 and Cu-containing Sr-Ti perovskites, as deduced by XRD) are not diluted in an inert carrier, and this can be done because the macroporous structure obtained using a polymethylmethacrylate colloidal crystal template allows the access of gases to the particles bulk. In situ DRIFTS experiments showed that NOx were chemisorbed on the novel Cu-containing Sr-Ti macroporous catalyst as a mixture of nitrite and nitro species, and this suggests that several NOx chemisorption pathways are simultaneously taking place probably involving chemisorption of both NO and NO2. Additionally, this novel catalyst is totally selective towards N2 formation as NOx reduction product, without traces of N2O nor NH3. CO2 and H2O compete with NOx for being chemisorbed on the catalyst, and this hinders the utilization of this catalyst in real diesel exhausts. However, we believe that this new concept of macroporous carrier-free catalyst could be extended to other heterogeneous catalyzed reactions or materials to avoid the diluting effect of the catalyst support.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

NOx storage and reduction over copper-based catalysts. Part 2: Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd)

  • Bueno López, Agustín
  • Lozano-Castello, Dolores
  • Anderson, James A.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) have been studied by rapid-scan operando DRIFTS for NOx Storage and Reduction (NSR) with high frequency (30 s) CO, H2 and 50%CO + 50%H2 micropulses. In the absence of reductant pulses, below 200–250 °C NOx was stored on the catalysts as nitrite and nitro groups, and above this temperature nitrates were the main species identified. The thermal stability of the NOx species stored on the catalysts depended on the acid/basic character of the dopant (M more acidic = NOx stored less stable ⇒ Zr4+ < none < Nd3+ < Pr3+ < La3+ ⇐ M more basic = NOx stored more stable). Catalysts regeneration was more efficient with H2 than with CO, and the CO + H2 mixture presented an intermediate behavior, but with smaller differences among the series of catalyst than observed using CO alone. N2 is the main NOx reduction product upon H2 regeneration. The highest NOx removal in NSR experiments performed at 400 °C with CO + H2 pulses was achieved with the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ) while the poorest performing catalyst was that with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ). The poor performance of CuO/Ce0.8Zr0.2Oδ in NSR experiments with CO pulses was attributed to its lower oxidation capacity compared to the other catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

NOx storage and reduction over copper-based catalysts. part 3: Simultaneous NOx and soot removal

  • Bueno López, Agustín
  • Lozano-Castello, Dolores
  • McCue, Alan J.
  • Anderson, James A.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) were studied for the simultaneous combustion of soot and removal of NOx by the NSR method. The simultaneous chemisorption of NOx and combustion of soot could be carried out above 375 °C, and nitrates were formed upon NOx chemisorption above this temperature. The nature of the M dopant played an important role in the chemisorption of NOx and in the catalysed soot-NOx reaction. As a general trend, the presence of soot had a negative impact on NOx removal by catalysts with very basic supports but had no effect or a positive influence if the support is not very basic. The combustion of soot has a very negative impact for NOx chemisorption on the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ), because the CO2 formed in the reaction of soot combustion competes with NOx for adsorption sites. On the other hand, soot combustion does not affect NOx chemisorption on the catalyst with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ), and the removal of NOx increases in this case because the reduction of NOx by soot contributes to NOx removal. The simultaneous reduction of NOx to N2 and soot combustion can be carried out under NSR conditions at 400 °C over the 5%Cu/Ce0.8Pr0.2Oδ catalyst and with H2 micropulses, and the NSR process has a positive impact on the catalytic combustion of soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

CuO/cryptomelane catalyst for preferential oxidation of CO in the presence of H2: deactivation and regeneration

  • Davó-Quiñonero, Arantxa
  • Navlani-García, Miriam
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Cryptomelane and CuO/cryptomelane catalysts have been tested in the preferential oxidation of CO in the presence of H2 (CO-PROX reaction), paying special attention to deactivation and regeneration issues. Cryptomelane was stable during the CO-PROX reactions in ramp experiments until 200 °C and in a long-term isothermal experiment (10 h). Changes neither in the H2 reducibility and porosity nor in the crystalline phases detected by XRD were observed. On the contrary, CuO/cryptomelane was partially deactivated during the consecutive CO-PROX reaction cycles performed until 200 °C, and the catalytic activity was partially restored by reoxidising the catalyst at 200 °C or 400 °C, the latter temperature being more effective. In spite of the CuO/cryptomelane partial deactivation, the CO-PROX activity of this catalyst was higher than that of cryptomelane once a stable behaviour was achieved. The partial deactivation of CuO/cryptomelane was attributed to the segregation of crystalline phases (hausmannite (Mn3O4) and/or hopcalite (CuMn2O4)), with the segregation of potassium to the surface and decrease in the copper cations' reducibility. The potential contribution to deactivation of the changes in the porous texture of CuO/cryptomelane was ruled out.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improved CO Oxidation Activity of 3DOM Pr-Doped Ceria Catalysts: Something Other Than an Ordered Macroporous Structure

  • Davó-Quiñonero, Arantxa
  • González Mira, Jorge
  • Such-Basañez, Ion
  • Juan Juan, Jerónimo
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
It is demonstrated that the synthesis procedure for preparing three-dimensionally ordered macroporous (3DOM) Pr-doped ceria catalysts using a polymethylmethacrylate (PMMA) template not only affects the porous structure, but also the chemistry of the ceria surface. The PMMA template does not affect the crystalline features (type of phases, crystallite size, and cell parameter) of Pr-doped ceria, Ce and Pr location into the particles, and the bulk reduction of the Ce-Pr mixed oxide catalysts. On the contrary, the utilization of the PMMA template improves both the porosity and surface redox properties. 3DOM Ce-Pr mixed oxide catalysts combine micro, meso, and macropores, the most area being in the macropore range, while a reference unshaped catalyst presents poor porosity in all ranges. However, the catalyzed CO oxidation rates do not correlate with the surface area of the catalysts (neither micro nor meso/macro). The Ce-Pr-3DOM catalyst also presents improved surface reducibility with regards to the counterpart reference material prepared without the template, and improved redox behavior under reaction conditions; that is, it has a higher area and this area is reduced and reoxidized more easily. X-ray photoelectron spectroscopy analysis evidences that this is mainly attributed to praseodymium cations, which accomplish redox cycles more easily than cerium cations.