Pasar al contenido principal

NANOMATERIALES FUNCIONALES BASADOS EN OXIDOS DE METALES: SINTESIS Y OPTIMIZACION DE SUS PROPIEDADES OPTICAS Y ELECTRONICAS PARA APLICACIONES EN ENERGIA Y SENSORES

MAT2015-65274-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Growth and characterization of Nb2O5 microstructures from Tailings from the Penouta Sn–Ta–Nb Deposit as precursor

  • Sotillo, Belén
  • López Gómez, Félix Antonio
  • García-Díaz, Irene
  • Fernández, Paloma
Niobium oxides constitute a group of materials that has proved their versatility for different applications. Among them, one of the most promising is the use in supercapacitors, due to the high dielectric constant. Other interesting properties like a bandgap in the near UV range or a high refractive index make then interesting for photocatalysis or light guiding. However, it has been shown that the properties of the niobium oxides are highly dependent on the stoichiometry and crystal structure of the compound . Another important problem in our society is the huge amount of waste that humans generate. In this sense, one of the EU's priorities is to promote the transition to a circular economy, where the materials and products manufactured with them are kept in the life cycle as long as possible. In this work, the starting niobium pentoxide (Nb2O5) is obtained from from the tailings from the Penouta Sn–Ta–Nb deposit. The first step has been the characterization of the properties of the recycled products, and compare its properties with a commercial one, showing the good quality of the obtained material. Using the recovered Nb2O5 as precursor, microrods have been grown using a vapor-solid method. The obtained microstructures have been characterized by means of X-ray diffraction, scanning electron microscopy, luminescence and Raman spectroscopy. The structural properties of the treated material have been studied in detail to elucidate its application in supercapacitors., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of thermal annealing on the structural and electronic properties of rare earth-implanted MoO3 nanoplates

  • Vila, M.
  • Díaz-Guerra, Carlos
  • Lorenz, K.
  • Piqueras, J.
  • Píš, I.
  • Magnano, E.
  • Munuera, C.
  • Alves, E.
  • García-Hernández, Mar
The compositional, structural and morphological recovery of α-MoO nanoplates implanted with Eu and Er ions has been assessed as a function of post-implantation thermal treatments. Rapid thermal annealing induces the formation of phases different from α-MoO and seems to be unable to recover the original oxygen content of the nanostructures. In contrast, conventional annealing in air at 450 °C for 4 hours fully recovers the original molybdenum trioxide structure and leads to an effective optical activation of both Er and Eu ions. Synchrotron-based X-ray photoelectron spectroscopy and X-ray absorption studies confirm the incorporation of the rare earth ions into their trivalent charge state and reveal the modification of the original valence band structure of the nanoplates., This work has been supported by MINECO through projects MAT2012-31959, MAT2015-65274-R and CSD2009-0013. KL thanks FCT Portugal for her grant as “Investigador FCT”. CM acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (RYC-2014-16626).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal growth, structural and optical characterization of hierarchical Bi2O3 - MoO3 nanostructures

  • Vila, María
  • Díaz-Guerra, Carlos
  • Piqueras, Javier
Branched α-BiO nanowires decorated with MoO nanoplates have been grown by a two–step sequential evaporation–deposition method. Their morphology, structural, compositional and luminescence properties were investigated by a set of spatially-resolved characterization techniques including scanning and high-resolution transmission electron microscopy (SEM, HRTEM), energy dispersive X-ray microanalysis (EDX), micro-Raman spectroscopy and cathodoluminescence (CL) in a SEM. Different zones can be distinguished in these complex structures. Close to the tips, the α-BiO nanowires appear covered by a high density of α–MoO nanoplates, as revealed by the SEM, HRTEM and micro-Raman observations. The BiO trunks of these hierarchical arrangements appear covered by a lower density of nanoplates, which decreases towards the base of the structures. Besides α–MoO, Raman measurements reveal the existence of crystals of other MoO phases, as well as different Mo oxides, in these zones. CL spectra from the different regions show emission bands related to oxygen vacancies and Bi intraionic transitions in α-BiO, while luminescence emission of the MoO nanoplates is mainly related to complex defects involving Mo ions and oxygen vacancies., This work has been supported by MINECO through projects MAT2012-31959, MAT2015-65274-R1 (MINECO/FEDER) and Consolider-Ingenio CSD2009-0013.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preferential Growth of ZnO Micro- and Nanostructure Assemblies on Fs-Laser-Induced Periodic Structures

  • Sotillo, Belén
  • Ariza, Rocío
  • Siegel, Jan
  • Solís Céspedes, Javier
  • Fernández, Paloma
© 2020 by the authors., In this work, we demonstrate the use of laser-induced periodic surface structures (LIPSS) as templates for the selective growth of ordered micro- and nanostructures of ZnO. Different types of LIPSS were first produced in Si-(100) substrates including ablative low-frequency spatial (LSF) LIPSS, amorphous-crystalline (a–c) LIPSS, and black silicon structures. These laser-structured substrates were subsequently used for depositing ZnO using the vapor–solid (VS) method in order to analyze the formation of organized ZnO structures. We used scanning electron microscopy and micro-Raman spectroscopy to assess the morphological and structural characteristics of the ZnO micro/nano-assemblies obtained and to identify the characteristics of the laser-structured substrates inducing the preferential deposition of ZnO. The formation of aligned assemblies of micro- and nanocrystals of ZnO was successfully achieved on LSF-LIPSS and a–c LIPSS. These results point toward a feasible route for generating well aligned assemblies of semiconductor micro- and nanostructures of good quality by the VS method on substrates, where the effect of lattice mismatch is reduced by laser-induced local disorder and likely by a small increase of surface roughness, This research was funded by the Spanish Ministry of Science, Innovation and Universities (grant number MINECO/FEDER-MAT2015-65274-R), the Spanish Research Agency (AEI, Ministry of Research and Innovation), and the European Regional Development Fund (ERDF) (grant number TEC2017-82464-R). B.S. acknowledges the postdoctoral grant from the “Atracción de Talento” Program awarded by the Comunidad de Madrid (2017-T2/IND-5465). R.A. acknowledges the European Social Fund (ESF) and the Youth Employment Initiative (YEI) of the Madrid region through the PEJD-2018-PRE/IND-8916 grant, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of K6Ta10.8O30 Microrods with Tetragonal Tungsten Bronze-Like Structure Obtained from Tailings from the Penouta Sn-Ta-Nb Deposit

  • Sotillo, Belén
  • Alcaraz, Lorena
  • López Gómez, Félix Antonio
  • Fernández, Paloma
© 2020 by the authors., In this work, a deep characterization of the properties of K6Ta10.8O30 microrods has been performed. The starting material used to grow the microrods has been recovered from mining tailings coming from the Penouta Sn-Ta-Nb deposit, located in the north of Spain. The recovered material has been submitted to a thermal treatment to grow the microrods. Then, they have been characterized by scanning electron microscopy, X-ray diffraction, micro-Raman and micro-photoluminescence. The results of our study confirm that the K6Ta10.8O30 microrods have a tetragonal tungsten bronze-like crystal structure, which can be useful for ion-batteries and photocatalysis., The authors are grateful to the Complutense University of Madrid and Banco Santander for support via the project UCM-Santander 2019 (PR87/19-22613), the Spanish Ministry of Science, Innovation and Universities for support via the projects ESTANNIO (RTC-2017-6629-5) and MINECO/FEDER-MAT2015-65274-R. This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 776851 (carEService). B. Sotillo acknowledges financial support from Comunidad de Madrid and Complutense University of Madrid (Ayudas del Programa de Atracción de Talento 2017-T2/IND-5465, and Proyectos de I+D para jóvenes doctores PR65/19-22464). We also acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of whispering gallery modes in Li-Doped ZnO hexagonal micro- and nanostructures

  • Ariza, Rocío
  • Sotillo, Belén
  • Pavón, Fernando
  • Urbieta, Ana
  • Fernández, Paloma
13 pags., 10 figs., 2 tabs., The formation of optical cavities in Li-doped ZnO nanostructures was investigated. By means of the vapor¿solid method, long micro- and nanostructures with a hexagonal cross-section were grown. These morphologies were favorable for Fabry-Pérot and whispering gallery modes to appear. A variety of structures with different sections was studied using µ-photoluminescence in both the transverse electric (TE) and transverse magnetic (TM) polarizations, showing well-pronounced optical resonant modes. The results showed a dominance of whispering gallery modes that were in good agreement with the calculated refractive index. The quality factor (Q) and finesse (F) were estimated, which demonstrated the quality of Li:ZnO structures as optical cavities, The authors are grateful to the Complutense University of Madrid and Banco Santander for support via the project UCM-Santander 2019 (PR87/19-22613) and to the Spanish Ministry of Science, Innovation and Universities for support via the project MINECO/FEDER-MAT2015-65274-R. B.S. acknowledges financial support from Comunidad de Madrid and Complutense University of Madrid (Ayudas del Programa de Atracción de Talento 2017-T2/IND-5465). R.A. acknowledges the European Social Fund (ESF) and the Youth Employment Initiative (YEI) of the Madrid region through the PEJD-2019-PRE/IND-16755 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vapor-solid growth ZnO:ZrO2 micro and nanocomposites

  • Ariza, Rocío
  • Dael, M.
  • Sotillo, B.
  • Urbieta, A.
  • Solís Céspedes, Javier
  • Fernández, P.
9 pags., 8 figs., 1 tab., Microstructures of ZnO and ZrO and the corresponding composites have been grown by the Vapor-Solid method. A detailed characterization of their structural, compositional and optical properties has been performed. X-ray diffraction (XRD) and Raman spectroscopy measurements, let us identify two main phases, wurtzite ZnO and monoclinic ZrO, reinforcing the hypothesis of ZnO/ZrO composite formation. Scanning Electron Microscopy observations reveal the presence of different morphologies depending on the synthesis conditions. Chemical composition was analyzed by energy dispersive X-ray (EDX) spectroscopy. Luminescence properties were studied by photoluminescence and cathodoluminescence. Our results indicate that doping is occurring in both phases: ZnO is doped with Zr and ZrO is doped with Zn. However important differences between Zr rich and Zn rich structures are encountered. While the Zn rich structures are single phase with the characteristic wurtzite crystal structure of ZnO, the Zr rich structures are multiphase with both monoclinic and wurtzite crystal structures present, then leading to formation of the composites with interesting luminescence properties, with intense emissions in the near UV and the visble range, even at room temperature., The authors are grateful to the Complutense University of Madrid and Banco Santander for support via the project UCM-Santander 2019 (PR87/19-22613), and to the Spanish Ministry of Science, Innovation and Universities for support via the project MINECO/FEDER-MAT2015-65274-R. This work was also partly funded through grant number TEC2017-82464-R (MCIU/AEI/FEDER, EU). R. Ariza acknowledges the European Social Fund (ESF) and the Youth Employment Initiative (YEI) of the Madrid region through the PEJD-2019-PRE/IND-16755 grant. B. Sotillo acknowledges financial support from Comunidad de Madrid and Complutense University of Madrid (Ayudas del Programa de Atracción de Talento 2017-T2/IND-5465).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Nb22O54 microrods grown from niobium oxide powders recovered from mine tailings

  • Sotillo, Belén
  • López Gómez, Félix Antonio
  • Alcaraz, Lorena
  • Fernández, Paloma
In this work, the possibility of using niobium oxide recovered from tailings from the Penouta Sn–Nb–Ta deposit (located at the North of Spain) as starting material for growing microstructures is demonstrated. The properties of the starting material have been studied to understand its crystal structure, quality and purity. Recovered niobium oxide powders are mainly of TT-NbO. These powders have been used to grow NbO microrods by an evaporation method in an argon atmosphere. Different characterization techniques (X-Ray diffraction, scanning electron microscopy, micro-Raman spectroscopy, luminescence) have been used to determine the properties of NbO microrods, mainly focusing on the crystal quality and refractive index. The present study opens the way to the transformation of waste (mine tailings) into a material of high technological value as niobium oxide, and its reintroduction into the value chain for a wide range of applications, from coatings to batteries and supercapacitors., The authors are grateful to the Spanish Ministry of Science, Innovation and Universities for support via the projects ESTANNIO (RTC-2017-6629-5) and MINECO/FEDER-MAT2015-65274-R. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 776851 (carEService). B. Sotillo acknowledges financial support from Comunidad de Madrid (Ayudas del Programa de Atracción de Talento 2017-T2/IND-5465).