Pasar al contenido principal

FUSIONANDO NANOMECANICA, OPTOMECANICA Y PLASMONICA PARA LA DETECCION DE PROTEINAS DE FUSION SECRETADAS POR TUMORES EN SUS ETAPAS INICIALES

MAT2015-66904-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of surface stress induced curvature on the eigenfrequencies of microcantilever plates

  • Ruz Martínez, José Jaime
  • Pini, Valerio
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Ultrasensitive physical, chemical and biological sensors have emerged in the last decade based on the measurement of the eigenfrequencies of micro- and nanosized cantilever plates. Surface stress is omnipresent in these devices due to a variety of factors such as the fabrication process, temperature variations and analyte adsorption. How surface stress influences on the eigenfrequencies of cantilever plates has remained as an unsolved question in physics that has raised a long debate since first experiments in 1975. Recent theoretical models have shed light on the role of the net surface stress. Still, there exists a discrepancy between theory and some experimental reports, affecting to the capability for quantification of these sensors. In this Letter, we present a theoretical framework that demonstrates that the cantilever bending due to differential surface stress between opposite faces of the cantilever, a neglected effect in classical beam theory, plays a relevant role in the stiffness and eigenfrequencies of cantilevers. We develop a new theoretical framework that provides analytical equations that accurately describe the effect of surface stress on the first three vibration modes of cantilevers. Our findings provide the final piece of the puzzle for solving this long-standing problem in physics, This study has been supported by European Union’ s Horizon 2020 research and innovation programme under grant agreement No 731868 – VIRUSCAN and European Research Council grant 681275 – LIQUIDMASS- ERC- CoG-2015; by Spanish Ministry of Economy and Competitiveness (grant MAT2015-66904-R). PMK acknowledges financial support by Fundación General CSIC (ComFuturo Program), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct detection of OXA-48 carbapenemase gene in lysate samples through changes in mechanical properties of DNA monolayers upon hybridization

  • Domínguez, Carmen M.
  • Ramos Vega, Daniel
  • Mingorance, Jesús
  • Fierro, José L.G.
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
Carbapenem-resistant Enterobacteriaceae have recently become an important cause of morbidity and mortality due to healthcare-associated infections. Most commonly used diagnostic methods are incompatible with fast and accurate directed therapy. We report here the direct identification of the blaOXA48 gene, which codes for the carbapenemase OXA-48, in lysate samples from Klebsiella pneumoniae. The method is PCR-free and label-free. It is based on the measurement of changes in the stiffness of DNA self-assembled monolayers anchored to microcantilevers that occur as a consequence of the hybridization. The stiffness of the DNA layer is measured through changes of the sensor resonance frequency upon hybridization and at varying relative humidity., This work was supported by the Spanish Science Ministry (MINECO) through project MAT2015-66904-R and by European Research Council through NANOFORCELLS project (ERC-StG-2011-278860) and European Union’s Horizon 2020 research and innovation program under grant agreement No. 731868-VIRUSCAN. D.R. acknowledges the Ramon y Cajal fellowship supported by Spanish Ministry MINECO. Authors also acknowledge the service from the XSEM Laboratory at IMN and funding from MINECO under project CSIC13-4E-1794 with support from EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the readout of microdrum optomechanical resonators

  • Pini, Valerio
  • Ramos Vega, Daniel
  • Domínguez, Carmen M.
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Davis, Zachary James
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
Free-standing dielectric structures with a substrate underneath, as the SiN microdrums studied here, are the basis of optomechanical devices. Optimization of the optomechanical coupling is demanding in order to enhance the performance of these devices. The optomechanical coupling in the case of drum resonators critically depends on the thickness of the drum, the surface stress, the cavity length and the wavelength. Here, we develop a methodology that combines spatially multiplexed microspectrophotometry, optical modelling of the cavity and finite element method simulation of the mechanical eigenmodes that enables obtaining the properties of the optomechanical cavity and predicting the wavelength that optimizes the optomechanical coupling. By choosing this illumination wavelength we are able to spatially resolve the thermal motion of the microdrums up to the fourth mechanical mode ~ 20 MHz. The presented study opens the door for further optimization pathways for optomechanical detection and actuation., This work was supported by the Spanish Science Ministry (MINECO) through project MAT2015-66904-R and by the European Union's Horizon 2020 research and innovation program under grant agreement No 731868–VIRUSCAN. D.R. acknowledges the RyC fellowship supported by MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasensitive detection of HIV-1 p24 antigen by a hybrid nanomechanical-optoplasmonic platform with potential for detecting HIV-1 at first week after infection

  • Kosaka, Priscila M.
  • Pini, Valerio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Early detection of HIV infection is the best way to prevent spread of the disease and to improve the efficiency of the antiretroviral therapy. Nucleic acid amplification tests (NAAT) have become the gold-standard for detecting low-concentrations of the virus in blood. However, these methods are technically demanding and cost-prohibitive in developing countries. Immunoassays are more affordable and can be more easily adapted for point-of-care diagnosis. However, the sensitivity so far of these methods has been too low. We here report the development of a sandwich immunoassay that combines nanomechanical and optoplasmonic transduction methods for detecting the HIV-1 capsid antigen p24 in human serum. The immunoreactions take place on the surface of a compliant microcantilever where gold nanoparticles are used as both mechanical and plasmonic labels. The microcantilever acts as both a mechanical resonator and an optical cavity for the transduction of the mechanical and plasmonic signals. The limit of detection of the immunoassay is 10−17 g/mL that is equivalent to one virion in 10 mL of plasma. This is 5 orders of magnitude better than last generation of approved immunoassays and 2 orders of magnitude better than NAAT. This technology meets the demands to be produced en masse at low cost and the capability for miniaturization to be used at the point-of-care., This study has been supported by the Spanish Ministry of Economy and Competitiveness (grant MAT2015-66904-R) and Spanish Association against Cancer (AECC) Scientific Foundation (grant PS15153089TAMA). PMK acknowledges financial support by Fundacio´n General CSIC (Program ComFuturo)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optomechanical devices for deep plasma cancer proteomics

  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Most of the cancer deaths could be avoided by early detection of the tumor when it is confined to its primary site and it has not metastasized. To this aim, one of the most promising strategies is the discovery and detection of protein biomarkers shed by the young tumor to the bloodstream. Proteomic technologies, mainly mass spectrometry and multiplexed immunoassays, have rapidly developed during last years with improved limits of detection and multiplexing capability. Unfortunately, these developments together major investments and large international efforts have not resulted into new useful protein biomarkers. Here, we analyze the potential and limitations of current proteomic technologies for detecting protein biomarkers released into circulation by the tumor. We find that these technologies can hardly probe the deepest region of the plasma proteome, at concentrations below the pg/mL level, where protein biomarkers for early cancer detection may exist. This clearly indicates the need of incorporating novel ultrasensitive techniques to the proteomic tool-box that can cover the inaccessible regions of the plasma proteome. We here propose biological detectors based on nanomechanical systems for discovery and detection of cancer protein biomarkers in plasma. We review the modes of operation of these devices, putting our focus on recent developments on nanomechanical sandwich immunoassays and nanomechanical spectrometry. The first technique enables reproducible immunodetection of proteins at concentrations well below the pg/mL level, with a limit of detection on the verge of 10 ag/mL. This technology can potentially detect low abundance tumor-associated proteins in plasma at the very early stages of the tumor. The second technique enables the identification of individual intact proteins by two physical coordinates, the mass and stiffness, instead of the mass-to-charge ratio of the protein constituents. This technology enormously simplifies the identification of proteins and it can provide useful information on interactions and posttranslational modifications, that otherwise is lost in mass spectrometry., This study has been supported by European Union’ s Horizon 2020 research and innovation programme under grant agreement No 731868 − VIRUSCAN; Spanish Ministry of Economy and Competitiveness (grant MAT2015-66904-R) and Spanish Association against Cancer (AECC) Scientific Foundation (grant <gn3>PS15153089TAMA</gn3). PMK acknowledges financial support by Fundación General CSIC (Program ComFuturo)., Peer reviewed