Pasar al contenido principal

DESARROLLO DE NUEVOS METODOS DE ANALISIS PARA EL ESTUDIO DE AGREGACION Y ADSORCION MOLECULAR

MAT2015-71826-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Simple approximation for aggregation number determination by isothermal titration calorimetry: STAND-ITC

  • Fernández Garrido, Pablo
  • Rodriguez-Dafonte, Pedro
  • García Río, Luis
  • Piñeiro Guillén, Ángel
A new proposal to obtain aggregation numbers from isothermal titration calorimetry dilution experiments is described and tested using dodecyl trimethyl ammonium bromide, dodecyl methylimidazolium chloride, dodecyl methylimidazolium sulfonate, and didecyl methylimidazolium chloride aqueous solutions at different temperatures. The results were compared to those obtained from fluorescence measurements and also with data from the literature. In addition to the aggregation number, the molar free energy to transfer a solute molecule from the aggregate to the bulk solution, the enthalpy corresponding to the formation of the self-assembled suprastructures, the molar heat corresponding to the dilution of monomers and aggregates, and an offset parameter to account for unpredictable external contributions are simultaneously obtained using the same method. The new equations are compared to those obtained from previous proposals, and they are also analyzed in detail to assess the impact of each fitting parameter in the profile of the calorimetric isotherm. This new approach has been implemented in a computational code that automatically determines the fitting parameters as well as the corresponding statistical uncertainties for the large variety of calorimetric profiles that have been tested. Given the high sensitivity of the dilution experiments to the aggregation number for relatively small assemblies, our approach is proposed also to quantify the oligomerization state of biomolecules such as proteins and peptides
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Unsupervised bubble calorimetry analysis: surface tension from isothermal titration calorimetry

  • Fernández Garrido, Pablo
  • Bastos, Margarida
  • Velazquez-Campoy, Adrian
  • Amigo Pombo, Alfredo José
  • Dumas, Philippe
  • Piñeiro Guillén, Ángel
Hypothesis: The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid. Experiments: Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code. Findings: The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles’ formation and release. The new algorithm was tested with a range of different types of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AFFINImeter: A software to analyze molecular recognition processes from experimental data

  • Piñeiro, Ángel
  • Muñoz, Eva
  • Sabín, Juan
  • Costas, Miquel
  • Bastos, Margarida
  • Velázquez-Campoy, Adrián
  • Garrido, Pablo F.
  • Dumas, P.
  • Ennifar, E.
  • García-Río, L.
  • Rial, J.
  • Pérez, Daniel
  • Fraga, P.
  • Rodríguez, A.
  • Cotelo, C
18 pags., 9 figs., 3 tabs., 1 app., The comprehension of molecular recognition phenomena demands the understanding of the energetic and kinetic processes involved. General equations valid for the thermodynamic analysis of any observable that is assessed as a function of the concentration of the involved compounds are described, together with their implementation in the AFFINImeter software. Here, a maximum of three different molecular species that can interact with each other to form an enormous variety of supramolecular complexes are considered. The corrections currently employed to take into account the effects of dilution, volume displacement, concentration errors and those due to external factors, especially in the case of ITC measurements, are included. The methods used to fit the model parameters to the experimental data, and to generate the uncertainties are described in detail. A simulation tool and the so called kinITC analysis to get kinetic information from calorimetric experiments are also presented. An example of how to take advantage of the AFFINImeter software for the global multi-temperature analysis of a system exhibiting cooperative 1:2 interactions is presented and the results are compared with data previously published. Some useful recommendations for the analysis of experiments aimed at studying molecular interactions are provided., The authors thank the financial support of the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71826-P to Á. P., BFU2016-78232-P to A.V.C. and CTQ2017-84354-P to L. G-R), Xunta de Galicia (projects AGRUP2015/11, GPC ED431B 2017/21, GR 2007/085, IN607C 2016/03 and Centro singular de investigación de Galicia accreditation 2016-2019, ED431G/09), and Fundação para a Ciência e a Tecnologia (project UID/QUI/0081/2013 to M.B.). These research projects were partially supported by FEDER. Financial support from PAIP-FQ-UNAM (grant 5000-9018 to M.C.) and FEDER (project Norte-01-0145-FEDER-000028 to M. B.) is acknowledged. P. F. G. thanks the Spanish Ministry of Economy and Competitiveness and the European Social Fund for his predoctoral research grant, reference BES-2016-076761. Facilities provided by the Galician Supercomputing Centre (CESGA) are also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluid interface calorimetry

  • Garrido, Pablo F.
  • Bastos, Margarida
  • Velázquez-Campoy, Adrián
  • Dumas, P.
  • Piñeiro, Ángel
11 pags., 6 figs., 1 tab., Hypothesis: Amphiphilic molecules spontaneously adsorb to fluid polar-nonpolar interfaces. The timescale of such adsorption depends on the molecular size and structure of the solute. This process should be accompanied by a power heat exchange that could be detected by commercial isothermal calorimeters. Experiments: Air is injected in the bulk of different aqueous solutions contained in the sample cell of an isothermal titration calorimeter. The formation of the resulting bubbles leads to a liquid/air interface to which the solute molecules spontaneously adsorb. Continuous injection experiments to produce multiple bubbles as well as experiments with static bubbles stand from the capillary tip, aiming to observe slow adsorption processes, were performed. Findings: The power associated with the formation, growth and release of air bubbles in different liquids was measured. Different independent contributions that can be associated to the pressure change in the gas phase, the evaporation-condensation of the solvent, the increase of interfacial area, the change in the heat capacity of the sample cell content, and the release of the bubble were observed. The periodic pattern produced by the continuous injection of air at a constant rate is used to determine the surface tension of different liquids, including solutions of different molecules and (bio)macromolecules., We would like to gratefully thank the help and support from Mike Brandts, from Malvern/Microcal, for the information pro-vided on the basic properties of VP-ITC instruments, as well asfrom Malin Suurkuusk and Peter Vikegard, from Waters/TA Instruments, for allowing us to use the calorimeters available in their lab.The authors thank the financial support of the Spanish Ministry ofEconomy and Competitiveness (projects MAT2015-71826-P to Á. P.and BFU2016-78232-P to A.V.C.), the Agencia Estatal de Investigación (AEI) (project PID2019-111327GB-I00 to Á. P.) and Fundação para a Ciência e Tecnologia (FCT), Portugal, for CIQUP(project UIDB/00081/2020 to M.B.). P. F. G. thanks the Spanish Ministry of Economy and Competitiveness and the European SocialFund for his predoctoral research grant, reference BES-2016-076761. These research projects were partially supported by European ERDF Funds (MCIU/AEI/FEDER, EU). Facilities provided by theGalician Supercomputing Centre (CESGA) are also acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unsupervised bubble calorimetry analysis: Surface tension from isothermal titration calorimetry

  • Garrido, Pablo F.
  • Bastos, Margarida
  • Velázquez-Campoy, Adrián
  • Amigo, Alfredo
  • Dumas, Philippe
  • Piñeiro, Ángel
10 pags, 8 figs. -- Supplementary data to this article can be found online at https://doi.org/10.1016/j.jcis.2021.08.115., Hypothesis: The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid. Experiments: Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code. Findings: The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles’ formation and release. The new algorithm was tested with a range of different of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell., The authors thank the financial support of the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71826-P to A. P. and BFU2016-78232-P to A.V.C.), the Agencia Estatal de Investigacion (AEI) (project PID2019-111327GB-I00 to A. P.) and Fundacao para a Ciencia e Tecnologia (FCT), Portugal, for CIQUP (project UIDB/00081/2020 to M.B.). P. F. G. thanks the Spanish Ministry of Economy and Competitiveness and the European Social Fund for his predoctoral research grant, reference BES-2016076761. These research projects were partially supported by European ERDF Funds (MCIU/AEI/FEDER, EU). Facilities provided by the Galician Supercomputing Centre (CESGA) are also acknowledged., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unsupervised bubble calorimetry analysis: Surface tension from isothermal titration calorimetry

  • Garrido, Pablo F.
  • Bastos, Margarida
  • Velazquez-Campoy, Adrian
  • Amigo, Alfredo
  • Dumas, Philippe
  • Pineiro, Angel
Hypothesis: The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid. Experiments: Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code. Findings: The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles'' formation and release. The new algorithm was tested with a range of different types of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell. (c) 2021 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).