Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New amphiphilic semi-interpenetrating networks based on polysulfone for anion-exchange membrane fuel cells with improved alkaline and mechanical stabilities

  • Ureña, N.
  • Pérez-Prior, M. T.
  • Río, Carmen del
  • Várez, A.
  • Levenfeld, Belén
As considerable advance has recently been made in enhancing the conductivity of anion-exchange membranes, durability has become the critical requirement in the development of fuel cells. Such properties often develop at the expense of the other. In this work, new amphiphilic semi-interpenetrating networks composed of free polysulfone and crosslinked polysulfone are synthesized for the first time. The same nature of both polymers makes them highly compatible. The free polymer provides the hydrophobic component, whereas the crosslinked polysulfone, functionalized with trimethylammonium, 1-methylimidazolium, or 1,2-dimethylimidazolium groups, is responsible for the ionic conductivity. The compatibility between both components in the blend, improves the mechanical properties, while unaffecting the transport properties. Thus, the obtained membranes exceed the mechanical behaviour of commercial materials, even in conditions of extreme humidity and temperature. The tensile strength of these synthesized membranes can reach to relatively high values, and when compared to the commercial PSU, the difference in tensile strength can be noted to be as low as 10%. Moreover, the tensile strength and the ductility values of the crosslinked PSU are higher than those obtained with non-crosslinked PSU. Furthermore, the membranes presented in this work show a great alkaline stability (e.g. semi-interpenetrating network containing 1,2-dimethylimidazolium maintains 87% of the ionic conductivity after 14 days of treatment). Thus, these membranes provide an improvement in the durability limiting factors, in comparison to functionalized polysulfones, fulfilling the requirements to be used as electrolytes in anion-exchange membrane fuel cells., We thank Agencia Estatal de Investigaci ́on (AEI)/Fondo Europeo de Desarrollo Regional (FEDER/UE) for funding the project MINECO (MAT2016-78632-C4-3-R, and PID-2019-106662RB-C43) which sup- ported this work. We also wish to thank the project from the Regional Government (Comunidad de Madrid through PEM4ENERGY-CM- UC3M)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using Metal-Organic Framework HKUST-1 for the Preparation of High-Conductive Hybrid Membranes Based on Multiblock Copolymers for Fuel Cells

  • Gorban, Ivan
  • Ureña, Nieves
  • Pérez-Prior, Maria T.
  • Várez, Alejandro
  • Levenfeld, Belén
  • Río, Carmen del
  • Soldatov, Mikhail
Novel proton-conducting hybrid membranes consisting of sulfonated multiblock copolymer of polysulfone and polyphenylsulfone (SPES) reinforced with a HKUST-1 metal-organic framework (MOF) (5, 10, and 20 wt. %) were prepared and characterized for fuel cell applications. The presence of the MOF in the copolymer was confirmed by means of FE-SEM and EDS. The hybrid membranes show a lower contact angle value than the pure SPES, in agreement with the water uptake (WU%), i.e., by adding 5 wt. % of the MOF, this parameter increases by 20% and 40% at 30 °C and 60 °C, respectively. Additionally, the presence of the MOF increases the ion exchange capacity (IEC) from 1.62 to 1.93 mH g. Thermogravimetric analysis reveals that the hybrid membranes demonstrate high thermal stability in the fuel cell operation temperature range (<100 °C). The addition of the MOF maintains the mechanical stability of the membranes (TS > 85 MPa in the Na form). Proton conductivity was analyzed using EIS, achieving the highest value with a 5 wt. % load of the HKUST-1. This value is lower than that observed for the HKUST-1/Nafion system. However, polarization and power density curves show a remarkably better performance of the hybrid membranes in comparison to both the pure SPES and the pure Nafion membranes., This work was funded by the Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER/UE), PID-2019-106662RB-C43, by the Spanish Government, MAT2016-78632-C4-3-R, by the Regional Government PEM4ENERGY-CM-UC3M funded by the call “Programa de apoyo a la realización de proyectos interdisciplinares de I + D para jóvenes investigadores de la Universidad Carlos III de Madrid 2019–2020” under the frame of the “Con-venio Plurianual Comunidad de Madrid-Universidad Carlos III de Madrid”, and by the Ministry of Science and Higher Education of the Russian Federation (State assignment in the field of scientific activity, № 0852-2020-0019)., Peer reviewed