Pasar al contenido principal

ELASTOMEROS TERMOPLASTICOS SOSTENIBLES E INNOVADORES BASADOS EN COPOLIMEROS DE BLOQUES ABA

MAT2017-82669-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT ROVIRA I VIRGILI

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual Biochemically Breakable Drug Carriers from Programmed Telechelic Homopolymers

  • Moreno, A.
  • Jiménez-Alesanco, Ana
  • Ronda, J.C.
  • Cádiz, V.
  • Galià, M.
  • Percec, V.
  • Abian, Olga
  • Lligadas, G.
13 pags., 8 figs., 1 tab., 1 sch., Well-defined hydrophilic telechelic dibromo poly(triethylene glycol monomethyl ether acrylate)s were prepared by single-electron transfer living radical polymerization employing a hydrophobic difunctional initiator containing acetal and disulfide linkages. Although the resulting homopolymers have low hydrophobic contents (<8.5 wt % of the entire structure), they are able to self-assemble in water into nanoscale micellelike particles via chain folding. Acetal and disulfide linkages were demonstrated to be "keystone" units for their dual stimuli-responsive behavior under biochemically relevant conditions. Their site-selective middle-chain cleavage under both acidic pH and reductive conditions splits the homopolymer into two equal-sized fragments and results in the breakdown of the nanoassemblies. The drug loading/delivery potential of these nanoparticles was investigated using curcumine combining in vitro drug release, cytotoxicity, and cellular uptake studies with human cancer cell lines (HT-29 and HeLa). Importantly, this strategy may be extended to prepare innovative nanoplatforms based on hydrophilic homopolymers or random copolymers for intelligent drug delivery., Spanish Ministerio de Ciencia, Innovacion y Universidades through project MAT2017-82669-R (to G.L. and J.C.R) and FPI grant BES-2015-072662 (to A.M.) and the Serra Hunter Programme of the Government of Catalonia (to G.L.) are acknowledged for supporting and funding this work. Miguel Servet Program from Instituto de Salud Carlos III (CPII13/ 00017 to O.A.); Fondo de Investigaciones Sanitarias from Instituto de Salud Carlos III; European Union (ERDF/ESF, ‘Investing in your future’) (PI18/00343 to O.A.); Diputacioń General de Aragon (Predoctoral Research Contract 2019 to A.J- ́ A., ‘Digestive Pathology Group’ B25_20R to O.A.); and Centro de Investigacion Biomedica en Red en Enfermedades Hepaticas ́ y Digestivas (CIBERehd). V.P. gratefully acknowledges the support from the National Science Foundation Grants DMR1066116 and DMR-1807127 and the P. Roy Vagelos Chair at the University of Pennsylvania.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biosourced All-Acrylic ABA Block Copolymers with Lactic Acid-Based Soft Phase

  • Bensabeh, N.
  • Jiménez-Alesanco, Ana
  • Liblikas, I.
  • Ronda, J.C.
  • Cádiz, V.
  • Galià, M.
  • Vares, L.
  • Abian, Olga
  • Lligadas, G.
16 pags., 9 figs., Lactic acid is one of the key biobased chemical building blocks, given its readily availability from sugars through fermentation and facile conversion into a range of important chemical intermediates and polymers. Herein, well-defined rubbery polymers derived from butyl lactate solvent were successfully prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of the corresponding monomeric acrylic derivative. Good control over molecular weight and molecular weight distribution was achieved in bulk using either monofunctional or bifunctional trithiocarbonate-type chain transfer agents. Subsequently, poly(butyl lactate acrylate), with a relative low Tg (-20 °C), good thermal stability (5% wt. loss at 340 °C) and low toxicity was evaluated as a sustainable middle block in all-acrylic ABA copolymers using isosorbide and vanillin-derived glassy polyacrylates as representative end blocks. Thermal, morphological and mechanical properties of copolymers containing hard segment contents of <20 wt% were evaluated to demonstrate the suitability of rubbery poly(alkyl lactate) building blocks for developing functional sustainable materials. Noteworthy, 180° peel adhesion measurements showed that the synthesized biosourced all-acrylic ABA copolymers possess competitive performance when compared with commercial pressure-sensitive tapes., This research was funded by Spanish Ministerio de Ciencia, Innovación y Universidades through project MAT2017-82669-R (to G.L. and J.C.R.), Serra Hunter Programme of the Government of Catalonia (to G.L.), University Rovira i Virgili (DL003536 grant to N.B.), Miguel Servet Program from Instituto de Salud Carlos III (CPII13/00017 to O.A.), Fondo de Investigaciones Sanitarias from Instituto de Salud Carlos III, and European Union (ERDF/ESF, ‘Investing in your future’) (PI18/00349 to O.A.), Diputación General de Aragón (Predoctoral Research Contract 2019 to A.J.-A., ‘Digestive Pathology Group’ B25_20R to O.A.), and Centro de Investigación Biomédica en Red en Enfermedades Hepáticas y Digestivas (CIBERehd). I.L. and L.V. gratefully acknowledge support from the European Regional Development Fund (No. MOBTT21), the Estonia-Russia Cross Border Cooperation Programme (ER30) and the Baltic Research Programme in Estonia (EEA grant no. EMP426)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Biosourced All-Acrylic ABA Block Copolymers with Lactic Acid-Based Soft Phase

  • Bensabeh, N.
  • Jiménez-Alesanco, A.
  • Liblikas, I.
  • Ronda, J.C.
  • Cádiz, V.
  • Galià, M.
  • Vares, L.
  • Abián, O.
  • Lligadas, G.
Lactic acid is one of the key biobased chemical building blocks, given its readily availability from sugars through fermentation and facile conversion into a range of important chemical intermediates and polymers. Herein, well-defined rubbery polymers derived from butyl lactate solvent were successfully prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of the corresponding monomeric acrylic derivative. Good control over molecular weight and molecular weight distribution was achieved in bulk using either monofunctional or bifunctional trithiocarbonate-type chain transfer agents. Subsequently, poly(butyl lactate acrylate), with a relative low Tg (-20 °C), good thermal stability (5% wt. loss at 340 °C) and low toxicity was evaluated as a sustainable middle block in all-acrylic ABA copolymers using isosorbide and vanillin-derived glassy polyacrylates as representative end blocks. Thermal, morphological and mechanical properties of copolymers containing hard segment contents of <20 wt% were evaluated to demonstrate the suitability of rubbery poly(alkyl lactate) building blocks for developing functional sustainable materials. Noteworthy, 180° peel adhesion measurements showed that the synthesized biosourced all-acrylic ABA copolymers possess competitive performance when compared with commercial pressure-sensitive tapes.