Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO 2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Sánchez-Royo, J. F.
  • Ribera, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tripositive cation, Ti as photocatalytically active d 0 transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy) 3 Cl 2 as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO 2 reduction under solar light irradiation. A different product selectivity, either CH 4 for Ni-LDH or CO and H 2 for Co -MO, was observed with production rates for CH 4 or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy) 3 Cl 2 triplet excited state by Ni-LDH or Co -MO. An important finding was that the trimetallic Co -Ti -Al oxide with cobaltite structure is able to perform CO 2 reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021- 125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM- 2022-60 and Advanced Materials Program MFA-2022-023 and MFA- 2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient NiFe-Layered Double Hydroxide Electrocatalyst Synthesized via a Solvent-Free Mechanochemical Method for Oxygen Evolution Reaction

  • Molina-Muriel, Manuel
  • Campagna Zignani, Sabrina
  • Ribera, Antonio
  • Aricò, Antonino Salvatore
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The growing concern over climate change and the reliance on fossil fuels has spurred interest in alternative energy processes, particularly electrochemical water splitting to produce hydrogen (H2). This study focuses on developing cost-effective and efficient oxygen evolution reaction (OER) electrocatalysts. We report a novel solvent-free mechanochemical method for synthesizing NiFe-layered double hydroxide (LDH), which demonstrates promising electrocatalytic properties for the OER. The mechanochemical synthesis, requiring only 1 h of solid reagent grinding, produces NiFe-LDH with structural features comparable to those obtained via traditional aqueous phase methods. The electrocatalyst was evaluated in a single cell with a membrane-electrode assembly configuration under alkaline conditions, exhibiting an overpotential of 221 mV at a current density of 10 mA<middle dot>cm-2 and a Tafel slope of 103.1 mV<middle dot>dec-1, indicating excellent OER kinetics and low energy barriers. Additionally, the catalyst demonstrated robust durability, maintaining a potential of around 1.55 V during a 35 h test at high current densities of 0.1 A<middle dot>cm-2 and even 1.75 V at 1 A<middle dot>cm-2. This work highlights the potential of NiFe-LDH synthesized by an energy-efficient, environmentally green, and scalable process for large industrial water-splitting applications, contributing to the advancement of sustainable hydrogen production technologies., The authors acknowledge the financial support provided by the EU H2020 GREEN DEAL "ECO2FUEL" project "Large-scale low-temperature electrochemical CO2 conversion to sustainable liquid fuels" Grant Agreement number: 101037389. Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21, and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60, and Advanced Materials Program MFA-2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of high entropy, bidimensional mixed oxides from multimetallic layered double hydroxide precursors and application in photocatalytic N2 hydrogenation to ammonia

  • Molina-Muriel, Manuel
  • Pastor-Espejo, Adrián
  • Déniz, Fernando
  • Ribera, Antonio
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A multimetallic layered double hydroxide containing seven metals has been prepared by coprecipitation in DMF/ H2O at pH 10 and converted into a seven metal mixed oxide. This high-entropy mixed metal (HE-MO) inherits from the LDH precursor the hexagonal sheet morphology. High resolution transmission electron microscopy, and EDS elemental mapping convincingly proves the absence of segregation of some elements in a different phase. Remarkably, neither noble metals nor lanthanides are used during the synthesis, and no reduction processes are needed to obtain the HE-MO. The resulting HE-MO promotes under continuous flow the photocatalytic nitrogen hydrogenation at atmospheric pressure and 200 degrees C with UV-vis light (108 mW cm- 2) at a rate of 20 mu mol NH3 center dot g- 1 center dot h- 1, lower or higher temperatures resulting in lower rates. This NH3 rate formation is much higher than that of a CoFe mixed oxide reference or than values reported in the literature for noble metal-free photocatalysts. The use of isotopically labelled 15N2 firmly proves this gas is the origin of the formed NH3. Influence of the N2 and H2 proportion shows that the rate determining step is the generation of active H species on the photocatalyst surface, while the photoresponse derives from the UV region. Photoluminescence measurements indicate the existence of a transient state of charge separation responsible for the photocatalytic reaction., Financial support by the Spanish Ministry of Science and Innovation and Universities (CEX-2021-001230-S, PDI2021-0126071-OB-CO21 and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021/038, CIPROM-2022-60 and Advanced Materials programme Graphica MFA/2022/023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. Adrian Pastor acknowledges the Margarita Salas postdoctoral fellowship, within the Recovery, Transformation and Resilience Plan (Spanish Ministry of Science, Innovation and Universities), funded by the European Union Next GenerationEu. Manuel Molina-Muriel thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. The authors acknowledge Francisco De Paula Martin for his support regarding the UPS and VB-XPS measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Downsize Effect on Photocatalytic Syngas Production of a 2D Metal Organic Framework-Tuning the Selectivity From HER to CO2RR via Dimensional Modulation and Mechanical Exfoliation of 2D Metal-Organic Layers

  • Saha, Rajat
  • Molina-Muriel, Manuel
  • Deniz, Fernando
  • Changarath, Mahesh Eledath
  • Ribera, Antonio
  • Benmansour, Samia
  • Sanchez-Royo, Juan F.
  • Canet-Ferrer, Josep
  • Ray, Debmalya
  • Garcia, Carlos J. Gomez
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Tuning the selectivity from hydrogen evolution reaction (HER) to CO2 reduction reaction (CO2RR) is a challenge in heterogeneous photocatalytic CO2 reduction by water as the proton source. The chemical inertness of CO2 and multiple proton-coupled electron transfer for CO2RR favor HER over CO2RR. To favor CO2RR, here we show the effect of downsizing the 2D Co-containing metal-organic framework (MOF) [Co(pdc)(H2O)(2)]& centerdot;H2O (2D) (pdc(2-) = 2,5-pyridinedicarboxylate) on its photocatalytic CO2RR performance. MOF 2D has been downsized in two ways: covalent bond breaking, leading to the 1D MOF [Co(pdc)(H2O)(2)]& centerdot;4H(2)O (1D), and supramolecular bond breaking of the metal-organic layers (MOLs) by liquid phase exfoliation (2D-ex). Structural analysis reveals that the Co-II centers have an octahedral geometry in 2D and a square pyramidal geometry in 1D, resulting in open metal sites. X-ray photoelectron spectroscopy (XPS) indicates that acetonitrile molecules are attached to the metal centers in 2D-ex, replacing some coordinated water molecules. Photocatalytic activity shows that these materials produce syngas with a tunable range of CO:H-2 ratio depending on the structure. Thus, 2D produces a higher proportion of H-2, whereas 1D and 2D-ex show a CO-enriched syngas. Theoretical studies show the relationship between the photocatalytic activity of these MOF and adsorption energies of CO2., This study forms part of the Advanced Materials program and was supported by the Spanish MCIN with funding from European Union NextGeneration EU (PRTR- C17.I1) and the Generalitat Valenciana (projects CIPROM/2022/060, CIPROM/2024/04, CIPROM/2024/071 MFA-2022-057, MFA-2022-017, MFA-2022-009, and MFA-2022-031). We also thank the Grants PID2023-146181OB-I00, PID2024-160147NB-I00, PID2024-161014NB-I00 funded by MCIN/AEI/ 10.13039/501100011033, CEX-2021-001230-S and Maria de Maeztu CEX2021-001202-M, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" M. E. C. acknowledges financial support from the Santiago Grisolia Program of the Generalitat Valencia (grant CIGRIS/2021/150). D.R. acknowledges start-up fund provided by Monmouth University. The computational research used resources of the National Energy Research Scientific Computing Center; a DOE Office of Science User Facility supported by the office of Science of the U.S. Department of Energy under the Contract No. DE-AC02-05CH11231 using NERSC award BES-ERCAP0033005. M.M. acknowledges the funding received through the European Union's Next GenerationEU funds, articulated at the national level by the Recovery, Transformation and Resilience Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LDH-derived CoTiAl mixed oxide as catalyst for photo-assisted CO2 hydrogenation

  • Molina-Muriel, Manuel
  • Peng, Yong
  • Szalad, Horatiu
  • ANTONIO RIBERA
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A layered double hydroxide (LDH) has been used as precursor for the synthesis of a multimetallic mixed oxide with photocatalytic activity. Thus, a trimetallic CoTiAl LDH has been synthesized as spherical aggregates of nanosheets. Analysis at short synthesis times indicates that CoTiAl-LDH particles grow perpendicular to initially formed oligomeric Ti-lactate nuclei. Calcination of CoTiAl-LDH at 400 degrees C affords the corresponding CoTiAl mixed oxide (MO) with low crystallinity having a cobaltite structure, while also maintaining the morphology. This CoTiAl-MO exhibits at 200 degrees C photocatalytic activity for CO2 hydrogenation to CO, accompanied with lesser amounts of CH4, with remarkable apparent quantum yields at 365 nm of 7.0 and 4.6 for CO and CH4, respectively and very low apparent activation energy for 10 kJ/mol. The present results show a promising direction to exploit the potential that the preparation of multimetallic LDH offers for the synthesis of mixed oxides with optimal compositions for an even more enhanced photocatalytic activity., Financial support by the Spanish Ministry of Science, Innovation and Universities (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60 and Advanced Materials Program MFA- 2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. H. S. thanks the EU -funded Solar2Chem ITN project for a contract.