Pasar al contenido principal

METODOS ADAPTATIVOS ESTABILIZADOS DE GALERKIN CON APLICACIONES MULTIFISICAS

MTM2013-40824-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Image processing applications through a variational perceptually-based color correction related to Retinex

  • Vazquez-Corral, Javier
  • Zamir, Syed Waqas
  • Galdran, Adrian
  • Pardo, David
  • Bertalmío, Marcelo
Comunicació presentada al IS&T International Symposium on Electronic Imaging, celebrat del 14 al 18 de febrer de 2016 a San Francisco (CA, USA) i organitzat per la Society for Imaging Science and Technology., The retinex theory of color vision has been a light of inspiration for color researchers since its inception 50 years ago. It has been adapted to work for different goals such as shadow removal, high dynamic range imaging, or computational color constancy. Back in 2007 a variational perceptually-based color correction model related to Retinex was presented by Bertalmío and colleagues. In this paper we first comment on this model and later we review different image processing applications that have been obtained by performing small modifications to it, namely color gamut mapping and image dehazing., J. Vazquez-Corral. S.W. Zamir, and M. Bertalmío were supported by European Research Council, Starting Grant ref. 306337, by the Spanish government, grant ref. TIN2012-38112, and by the Icrea Academia Award. D. Pardo was partially funded by the Project of the Spanish Ministry of Economy and Competitiveness with reference MTM2013-40824-P, the BCAM ”Severo Ochoa” accreditation of excellence SEV-2013-0323, the CYTED 2011 project 712RT0449, and the Basque Government Consolidated Research Group Grant IT649-13 on “Mathematical Modeling, Simulation, and Industrial Applications (M2SI)”.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Fusion-based variational image dehazing

  • Galdran, Adrian
  • Vazquez-Corral, Javier
  • Pardo, David
  • Bertalmío, Marcelo
We propose a novel image-dehazing technique based on the minimization of two energy functionals and a fusion scheme to combine the output of both optimizations. The proposed fusion-based variational image-dehazing (FVID) method is a spatially varying image enhancement process that first minimizes a previously proposed variational formulation that maximizes contrast and saturation on the hazy input. The iterates produced by this minimization are kept, and a second energy that shrinks faster intensity values of well-contrasted regions is minimized, allowing to generate a set of difference-of-saturation (DiffSat) maps by observing the shrinking rate. The iterates produced in the first minimization are then fused with these DiffSat maps to produce a haze-free version of the degraded input. The FVID method does not rely on a physical model from which to estimate a depth map, nor it needs a training stage on a database of human-labeled examples. Experimental results on a wide set of hazy images demonstrate that FVID better preserves the image structure on nearby regions that are less affected by fog, and it is successfully compared with other current methods in the task of removing haze degradation from faraway regions., The work of J. Vazquez-Corral and M. Bertalmío was supported by the ERC Starting Grant 306337, by the FEDER Fund under Grant TIN2015-71537-P(MINECO/FEDER,UE), by the ICREA Academia Award, and by the Spanish government under Grant IJCI-2014-19516. The work of D. Pardo was supported by the Spanish government under Grant MTM2013-40824-P, by the BCAM Severo Ochoa accreditation of excellence SEV-2013-0323, and the Basque Government CRG Grant IT649-13.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Enhanced variational image dehazing

  • Galdran, Adrian
  • Vazquez-Corral, Javier
  • Pardo, David
  • Bertalmío, Marcelo
Images obtained under adverse weather conditions, such as haze or fog, typically/nexhibit low contrast and faded colors, which may severely limit the visibility within the scene. Unveiling/nthe image structure under the haze layer and recovering vivid colors out of a single image/nremains a challenging task, since the degradation is depth-dependent and conventional methods are/nunable to overcome this problem. In this work, we extend a well-known perception-inspired variational/nframework for single image dehazing. Two main improvements are proposed. First, we replace/nthe value used by the framework for the grey-world hypothesis by an estimation of the mean of/nthe clean image. Second, we add a set of new terms to the energy functional for maximizing the/ninter-channel contrast. Experimental results show that the proposed Enhanced Variational Image/nDehazing (EVID) method outperforms other state-of-the-art methods both qualitatively and quantitatively./nIn particular, when the illuminant is uneven, our EVID method is the only one that recovers/nrealistic colors, avoiding the appearance of strong chromatic artifacts., D. Pardo was partially funded by the Project of the Spanish Ministry of Economy and Competitiveness with reference MTM2013-40824-P, the BCAM “Severo Ochoa” accreditation of excellence SEV-2013-0323, the CYTED 2011 project 712RT0449, and the Basque Government/nConsolidated Research Group Grant IT649-13 on “Mathematical Modeling, Simulation, and Industrial Applications (M2SI)”.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Time-resolved adaptive FEM simulation of the DLR-F11 aircraft model at high Reynolds number

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
  • de Abreu, R.V.
We present a time-resolved, adaptive finite element method for aerodynamics, together with the results from the HiLiftPW-2 workshop, where this method is used to compute the ow past a DLR-F11 aircraft model at realistic Reynolds number. The mesh is automatically constructed by the method as part of the computation, and no explicit turbulence model is used. The effect of unresolved turbulent boundary layers is modeled by a simple parametrization of the wall shear stress in terms of the skin friction. In the extreme case of very high Reynolds numbers we approximate the small skin friction by zero skin friction, corresponding to a free slip boundary condition, which results in a computational model without any model parameter that needs tuning. Thus, the simulation methodology bypasses the main challenges posed by high Reynolds number CFD: the design of an optimal computational mesh, turbulence (or subgrid) modeling, and the cost of boundary layer res- olution. The results from HiLiftPW-2 presented in this report show good agreement with experimental data for a range of different angles of attack, while using orders of magnitude fewer degrees of freedom than what is needed in state of the art methods such as RANS.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

LBM-HPC - An open-source tool for fluid simulations. Case study: Unified parallel C (UPC-PGAS)

  • Valero-Lara, P.
  • Jansson, J.
The main motivation of this work is the evaluation of the Unified Parallel C (UPC) model, for Boltzmann-fluid simulations. UPC is one of the current models in the so-called Partitioned Global Address Space paradigm. This paradigm attempts to increase the simplicity of codes and achieve a better efficiency and scalability. Two different UPC-based implementations, explicit and implicit, are presented and evaluated. We compare the fundamental features of our UPC implementations with other parallel programming model, MPI-OpenMP. In particular each of the major steps of any LBM code, i.e., Boundary Conditions, Communication, and LBM solver, are analyzed.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

A Non-uniform Staggered Cartesian Grid approach for Lattice-Boltzmann method

  • Valero-Lara, P.
  • Jansson, J.
We propose a numerical approach based on the Lattice-Boltzmann method (LBM) for dealing with mesh refinement of Non-uniform Staggered Cartesian Grid. We explain, in detail, the strategy for mapping LBM over such geometries. The main benefit of this approach, compared to others, consists of solving all fluid units only once per time-step, and also reducing considerably the complexity of the communication and memory management between different refined levels. Also, it exhibits a better matching for parallel processors. To validate our method, we analyze several standard test scenarios, reaching satisfactory results with respect to other stateof-the-art methods. The performance evaluation proves that our approach not only exhibits a simpler and efficient scheme for dealing with mesh refinement, but also fast resolution, even in those scenarios where our approach needs to use a higher number of fluid units.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards a parameter-free method for high Reynolds number turbulent flow simulation based on adaptive finite element approximation

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
  • de Abreu, R.V.
This article is a review of our work towards a parameter-free method for simulation of turbulent flow at high Reynolds numbers. In a series of papers we have developed a model for turbulent flow in the form of weak solutions of the Navier-Stokes equations, approximated by an adaptive finite element method, where: (i) viscous dissipation is assumed to be dominated by turbulent dissipation proportional to the residual of the equations, and (ii) skin friction at solid walls is assumed to be negligible compared to inertial effects. The result is a computational model without empirical data, where the only model parameter is the local size of the finite element mesh. Under adaptive refinement of the mesh based on a posteriori error estimation, output quantities of interest in the form of functionals of the finite element solution converge to become independent of the mesh resolution, and thus the resulting method has no adjustable parameters. No ad hoc design of the mesh is needed, instead the mesh is optimized based on solution features, in particular no boundary layer mesh is needed. We connect the computational method to the mathematical concept of a dissipative weak solution of the Euler equations, as a model of high Reynolds number turbulent flow, and we highlight a number of benchmark problems for which the method is validated. The purpose of the article is to present the computational framework in a concise form, to report on recent progress, and to discuss open problems that are subject to ongoing research.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Multi-domain grid refinement for lattice-Boltzmann simulations on heterogeneous platforms

  • Valero-Lara, P.
  • Jansson, J.
The main contribution of the present work consists of several parallel approaches for grid refinement based on a multi-domain decomposition for lattice-Boltzmann simulations. The proposed method for discretizing the fluid incorporates different regular Cartesian grids with no homogeneous spatial domains, which are in need to be communicated each other. Three different parallel approaches are proposed, homogeneous Multicore, homogeneous GPU, and heterogeneous Multicore-GPU. Although, the homogeneous implementations exhibit satisfactory results, the heterogeneous approach achieves up to 30% extra efficiency, in terms of Millions of Fluid Lattice Updates per Second (MFLUPS), by overlapping some of the steps on both architectures, Multicore and GPU.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

FEniCS-HPC: Automated predictive high-performance finite element computing with applications in aerodynamics

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
Developing multiphysics finite element methods (FEM) and scalable HPC implementations can be very challenging in terms of software complexity and performance, even more so with the addition of goal-oriented adaptive mesh refinement. To manage the complexity we in this work present general adaptive stabilized methods with automated implementation in the FEniCS-HPC automated open source software framework. This allows taking the weak form of a partial differential equation (PDE) as input in near-mathematical notation and automatically generating the low-level implementation source code and auxiliary equations and quantities necessary for the adaptivity. We demonstrate new optimal strong scaling results for the whole adaptive framework applied to turbulent flow on massively parallel architectures down to 25000 vertices per core with ca. 5000 cores with the MPI-based PETSc backend and for assembly down to 500 vertices per core with ca. 20000 cores with the PGAS-based JANPACK backend. As a demonstration of the power of the combination of the scalability together with the adaptive methodology allowing prediction of gross quantities in turbulent flow we present an application in aerodynamics of a full DLR-F11 aircraft in connection with the HiLift-PW2 benchmarking workshop with good match to experiments.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Many-task computing on many-core architectures

  • Valero-Lara, P.
  • Nookala, P.
  • Pelayo, F.L.
  • Jansson, J.
  • Dimitropoulos, S.
  • Raicu, I.
Many-Task Computing (MTC) is a common scenario for multiple parallel systems, such as cluster, grids, cloud and supercomputers, but it is not so popular in shared memory parallel processors. In this sense and given the spectacular growth in performance and in number of cores integrated in many-core architectures, the study of MTC on such architectures is becoming more and more relevant. In this paper, authors present what are those programming mechanisms to take advantages of such massively parallel features for the particular target of MTC. Also, the hardware features of the two dominant many-core platforms (NVIDIA's GPUs and Intel Xeon Phi) are also analyzed for our specific framework. Given the important differences in terms of hardware and software in our two many-core platforms, we have considered different strategies based on CUDA (for GPUs) and OpenMP (for Intel Xeon Phi). We carried out several test cases based on an appropriate and widely studied problem for benchmarking as matrix multiplication. Essentially, this study consisted of comparing the time consumed for computing in parallel several tasks one by one (the whole computational resources are used just to compute one task at a time) with the time consumed for computing in parallel the same set of tasks simultaneously (the whole computational resources are used for computing the set of tasks at very same time). Finally, we compared both software-hardware scenarios to identify the most relevant computer features in each of our many-core architectures.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

BBIPED: BCAM-Baltogar Industrial Platform for Engineering Design

  • Alonso-Montes, C.
  • Garcia, I.
  • Ramezani, A.
  • Remaki, L.
Currently, commercial software for computational fluid dynamics offers a good set of features to deal with traditional designs. Within a competitive market industrial innovation is a key factor that must be faced by companies. However, the design of solutions to deal with industrial challenges cannot be done within commercial software due to the lack of flexibility. Open source initiatives are a good option but the learning curve is high, specially for industrial engineers profiles. In this paper, we present the BBIPED platform which has been designed to deal with turbomachinery applications in a simple and friendly way. The main goal is to keep the platform as simpler as possible providing the enough flexibility to include out-of-the-box solutions to cope with industrial challenges. BBIPED platform provides links with currently existing remarkable open source initiatives altogether with our own developments. Particularly, it is remarkable a first approach for automatic mesh generation based on geometry parametrization solution, and the provision of novel techniques to deal with multiple rotating frame (MRF): Multizone MRF an Virtual MRF. Case tests were designed to test the solutions and to assess and validate the results against commercial suites with promising results.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

Identification of defects originated during the filling of cast pieces through particles modelling

  • Blanco, J.M.
  • Carranza, P.
  • Pintos, R.
  • Arriaga, P.
  • Remaki, L.
In casting processes, strong recirculation zones may trap air, gases and strip particles of sand off the mold affecting seriously the quality of the cast pieces. Especially during the filling of molten pieces with large surfaces, several faults were detected which are responsible of considerable economic losses in such casting processes. The aim of this work is focused on the correct identification of these physical phenomena, through Computational Fluid Dynamics (CFD). A fully experimental work correlating a saline solution with similar properties than the liquid alloy was carried out in order to guess the flow behavior inside the mold. Different parameters such as filling time, temperature and velocity of the liquid alloy together with the geometrical design of the mold were taken into account. The simulated evolution profiles and propagation speeds were compared with the laboratory experiments showing good agreement, validating thus the numerical model. Through an advanced particles modeling feature from a commercial package, the potential to predict and later correct some casting defects was demonstrated. As a conclusion, the mold together with supply channels need to be carefully optimized in order to control the correct direction of solidification avoiding the appearance of oxides but also to prevent stripping the sand off the walls.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

New Theory of Flight

  • Hoffman, J.
  • Jansson, J.
  • Claes, J.
We present a new mathematical theory explaining the fluid mechanics of subsonic flight, which is fundamentally different from the existing boundary layer-circulation theory by Prandtl–Kutta–Zhukovsky formed 100 year ago. The new theory is based on our new resolution of d’Alembert’s paradox showing that slightly viscous bluff body flow can be viewed as zero-drag/lift potential flow modified by 3d rotational slip separation arising from a specific separation instability of potential flow, into turbulent flow with nonzero drag/lift. For a wing this separation mechanism maintains the large lift of potential flow generated at the leading edge at the price of small drag, resulting in a lift to drag quotient of size 15–20 for a small propeller plane at cruising speed with Reynolds number $Re \approx 10^7$ and a jumbojet at take-off and landing with $Re \approx 10^8$, which allows flight at affordable power. The new mathematical theory is supported by computed turbulent solutions of the Navier–Stokes equations with a slip boundary condition as a model of observed small skin friction of a turbulent boundary layer always arising for $Re > 10^6$, in close accordance with experimental observations over the entire range of angle of attacks including stall using a few millions of mesh points for a full wing-body configuration.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Smooth additive mixed models for predicting aboveground biomass

  • Sánchez-González, M.
  • Durban, M.
  • Lee, D.J.
  • Cañellas, I.
  • Sixto, H.
Aboveground biomass estimation in short-rotation forestry plantations is an essential step in the development of crop management strategies as well as allowing the economic viability of the crop to be determined prior to harvesting. Hence, it is important to develop new methodologies that improve the accuracy of predictions, using only a minimum set of easily obtainable information i.e. diameter and height. Many existing models base their predictions only on diameter (mainly due to the complexity of including further covariates), or rely on complicated equations to obtain biomass predictions. However, in tree species, it is important to include height when estimating aboveground biomass because this will vary from one genotype to another. This work proposes the use of a more flexible and easy to implement model for predicting aboveground biomass (stem, branches and total) as a smooth function of height and diameter using smooth additive mixed models which preserve the additive property necessary to model the relationship within wood fractions, and allows the inclusion of random effects and interaction terms. The model is applied to the analysis of three trials carried out in Spain, where nine clones at three different sites are compared. Also, an analysis of slash pine data is carried out in order to compared with the approach proposed by Parresol (2001)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A multi-objective memetic inverse solver reinforced by local optimization methods

  • Gajda-Zagórska, E.
  • Schaefer, R.
  • Smolka, M.
  • Pardo, D.
  • Alvarez-Aramberri, J.
We propose a new memetic strategy that can solve the multi-physics, complex inverse problems, formulated as the multi-objective optimization ones, in which objectives are misfits between the measured and simulated states of various governing processes. The multi-deme structure of the strategy allows for both, intensive, relatively cheap exploration with a moderate accuracy and more accurate search many regions of Pareto set in parallel. The special type of selection operator prefers the coherent alternative solutions, eliminating artifacts appearing in the particular processes. The additional accuracy increment is obtained by the parallel convex searches applied to the local scalarizations of the misfit vector. The strategy is dedicated for solving ill-conditioned problems, for which inverting the single physical process can lead to the ambiguous results. The skill of the selection in artifact elimination is shown on the benchmark problem, while the whole strategy was applied for identification of oil deposits, where the misfits are related to various frequencies of the magnetic and electric waves of the magnetotelluric measurements
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Dimensionally adaptive hp-finite element simulation and inversion of 2D magnetotelluric measurements

  • Alvarez-Aramberri, J.
  • Pardo, D.
Magnetotelluric (MT) problems often contain different subdomains where the conductivity of the media depends upon one, two, or three spatial variables. Traditionally, when a MT problem incorporates a three-dimensional (3D) subdomain, the numerical method employed for simulation and inversion was 3D over then entire domain. In here, we propose to take advantage of the possibly lower dimensionality of certain subdomains during the inversion process. By doing so, we obtain significant computational savings (up to 75% in some scenarios) and increased accuracy on the results. We numerically illustrate this method by employing two dimensional (2D) computations based on a multi-goal oriented . hp-adaptive Finite Element Method (FEM) that exhibits superior convergence properties. Additionally, we provide a formulation for implementing an efficient adjoint based method for the computation of the derivatives of the impedance, and we show the importance of the (a) proper selection of the inversion variable, and (b) the advantages of using both the Transverse Electric (TE) and Transverse Magnetic (TM) measurements for the proper inversion of MT data.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The value of continuity: Refined isogeometric analysis and fast direct solvers

  • Garcia, D.
  • Pardo, D.
  • Dalcin, L.
  • Paszynski, M.
  • Collier, N.
  • Calo, V.M.
We propose the use of highly continuous finite element spaces interconnected with low continuity hyperplanes to maximize the performance of direct solvers. Starting from a highly continuous Isogeometric Analysis (IGA) discretization, we introduce $C^0$-separators to reduce the interconnection between degrees of freedom in the mesh. By doing so, both the solution time and best approximation errors are simultaneously improved. We call the resulting method ``refined Isogeometric Analysis (rIGA)". To illustrate the impact of the continuity reduction, we analyze the number of Floating Point Operations (FLOPs), computational times, and memory required to solve the linear system obtained by discretizing the Laplace problem with structured meshes and uniform polynomial orders. Theoretical estimates demonstrate that an optimal continuity reduction may decrease the total computational time by a factor between $p^2$ and $p^3$, with $p$ being the polynomial order of the discretization. Numerical results indicate that our proposed rIGA method delivers a speed-up factor proportional to $p^2$. In a $2D$ mesh with four million elements and $p = 5$, the linear system resulting from rIGA is solved $22$ times faster than the one from highly continuous IGA. In a $3D$ mesh with one million elements and $p = 3$, the linear rIGA system is solved $15$ times faster than the IGA one., The Project of the Spanish Ministry of Economy and Competitiveness MTM2016-76329-R. The Consolidated Research Group Grant IT649-13 on "Mathematical Modeling, Simulation, and Industrial Applications (M2SI)", The ICERMAR Project KK-2015/0000097.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A multi-domain decomposition-based Fourier finite element method for the simulation of 3D marine CSEM measurements

  • Bakr, S.A.
  • Pardo, D.
We introduce a multi-domain decomposition Fourier finite element (MDDFFE) method for the simulation of three-dimensional (3D) marine controlled source electromagnetic measurement (CSEM). The method combines a 2D finite element (FE) method in two spatial dimensions with a hybrid discretization based on a Fourier FE method along the third dimension. The method employs a secondary field formulation rather than the total field formulation. We apply the MDDFFE method to several synthetic marine CSEM examples exhibiting bathymetry and/or multiple 3D subdomains. Numerical results show that the use of the MDDFFE method reduces the problem size by as much as 87 % in terms of the number of unknowns, without any sacrifice in accuracy.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A source time reversal method for seismicity induced by mining

  • Brevis, R.I.
  • Ortega, J.H.
  • Pardo, D.
In this work, we present a modified Time-Reversal Mirror (TRM) Method, called Source Time Reversal (STR), to find the spatial distribution of a seismic source induced by mining activity. This methodology is based on a known full description of the temporal dependence of the source, the Duhamel's principle, and the time-reverse property of the wave equation. We also provide an error estimate of the reconstruction when the measurements are acquired over the entire boundary, and we show experimentally the influence of measuring on a subdomain of the boundary. Numerical results indicate that the methodology is able to recover continuous and discontinuous sources, and it remains stable for partial boundary measurements.
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Framework for adaptive fluid-structure interaction with industrial applications

  • Jansson, J.
  • Degirmenci, N.C.
  • Hoffman, J.
We present developments in the Unicorn-HPC framework for unified continuum mechanics, enabling adaptive finite element computation of fluid-structure interaction, and an overview of the larger FEniCS-HPC framework for automated solution of partial diffential equations of which Unicorn-HPC is a part. We formulate the basic model and finite element discretisation method and adaptive algorithms. We test the framework on a 2D model problem consisting of a flexible beam in channel flow, and to illustrate the capabilities of the computational framework, we show two application examples from industry and medicine. We simulate a flexible mixer plate in turbulent flow in an exhaust system where the target output is aeroacoustic quantities. The second example is a self-oscillating vocal fold configuration, where the ultimate goal is to predict how the voice is affected by physiological changes from aerodynamics. Here we give the displacement signal of a point on the folds.
BIRD. BCAM's Institutional Repository Data
Publicación Contribución de congreso (ConferenceOutput)

A two-level finite element discretization of the streamfunction formulation of the stationary quasi-geostrophic equations of the ocean

  • Foster, E.L.
  • Iliescu, T.
  • Wells, D.R.
In this paper we proposed a two-level finite element discretization of the nonlinear stationary quasi-geostrophic equations, which model the wind driven large scale ocean circulation. Optimal error estimates for the two-level finite element discretization were derived. Numerical experiments for the two-level algorithm with the Argyris finite element were also carried out. The numerical results verified the theoretical error estimates and showed that, for the appropriate scaling between the coarse and fine mesh sizes, the two-level algorithm significantly decreases the computational time of the standard one-level algorithm.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards the development of adaptive finite element methods for internal flow aeroacoustics

  • de Abreu, R.V.
  • Hoffman, J.
  • Jansson, J.
We report the latest results obtained in the development of an adaptive finite element method for computational aeroacoustics (CAA). The new methodology is based on the General Galerkin (G2) method, which has been successfully used for the computation of incompressible, turbulent flow. Here, we simulate the flow past an in-duct mixer plate and compare the results with available experimental data. The comparisons include mean velocity profiles and frequency content of the turbulent signal. No direct simulation of sound or sound wave propagation has been performed; instead, simple analogy arguments have been used to extract acoustic results from incompressible simulations by assuming a direct correlation between the computed pressure drop signal and the sound at the far field. We were able to reproduce the sound signal from experiments with our incompressible simulation and our results compared well with both the level and the broadband frequency peak of the measured sound. We suggest that the methodology presented here is mainly suitable for the prediction of sound in low Mach number pipe flows.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Computation of slat noise sources using adaptive FEM and lighthill's analogy

  • Hoffman, J.
  • Jansson, J.
  • de Abreu, R.V.
This is a summary of preliminary results from simulations with the 30P30N high-lift device. We used the General Galerkin finite element method (G2), where no explicit subgrid model is used, and where the computational mesh is adaptively refined with respect to a posteriori error estimates for a quantity of interest. The mesh is fully unstructured and the solutions are time-resolved, which are key ingredients for solving challenging industrial applications in the field of aeroacoustics. We present preliminary results containing time-averaged quantities and snapshots of unsteady quantities, all reasonably agreeing with previous computational efforts. One important finding is that the use of adaptively generated meshes seems to be a more effcient way of computing aeroacoustic sources than by using "handmade" meshes.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Optimally refined isogeometric analysis

  • Garcia, D.
  • Barton, M.
  • Pardo, D.
Performance of direct solvers strongly depends upon the employed discretization method. In particular, it is possible to improve the performance of solving Isogeometric Analysis (IGA) discretizations by introducing multiple $C^0$-continuity hyperplanes that act as separators during LU factorization \cite{rIGA1}. In here, we further explore this venue by introducing separators of arbitrary continuity. Moreover, we develop an efficient method to obtain optimal discretizations in the sense that they minimize the time employed by the direct solver of linear equations. The search space consists of all possible discretizations obtained by enriching a given IGA mesh. Thus, the best approximation error is always reduced with respect to its IGA counterpart, while the solution time is decreased by up to a factor of 60., ICERMAR Project KK-2015/0000097 Consolidated Research Group Grant IT649-13
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Goal-Oriented p-Adaptivity using Unconventional Error Representations for a 1D Steady State Convection-Diffusion Problem

  • Pardo, D.
  • Darrigrand, V.
  • Rodríguez-Rozas, A.
  • Muga, I.
This work proposes the use of an alternative error representation for Goal-Oriented Adaptivity (GOA) in context of steady state convection dominated diffusion problems. It introduces an arbitrary operator for the computation of the error of an alternative dual problem. From the new representation, we derive element-wise estimators to drive the adaptive algorithm. The method is applied to a one dimensional (1D) steady state convection dominated diffusion problem with homogeneous Dirichlet boundary conditions. This problem exhibits a boundary layer that produces a loss of numerical stability. The new error representation delivers sharper error bounds. When applied to a $p$-GOA Finite Element Method (FEM), the alternative error representation captures earlier the boundary layer, despite the existing spurious numerical oscillations., Basque Government Consolidated Research Group Grant IT649-13 Spanish Ministry under Grant No. FPDI- 2013-17098 ICERMAR Project KK-2015/0000097 CYTED 2011 project 712RT0449 FONDECYT project 1160774
BIRD. BCAM's Institutional Repository Data
Publicación Tesis doctoral (DoctoralThesis)

Goal-Oriented Adaptivity using Unconventional Error Representations

  • Darrigrand, V.
In Goal-Oriented Adaptivity (GOA), the error in a Quantity of Interest (QoI) is represented using global error functions of the direct and adjoint problems. This error representation is subsequently bounded above by element-wise error indicators that are used to drive optimal refinements. In this work, we propose to replace, in the error representation, the adjoint problem by an alternative operator. The main advantage of the proposed approach is that, when judiciously selecting such alternative operator, the corresponding upper bound of the error representation becomes sharper, leading to a more efficient GOA. These representations can be employed to design novel h, p, and hp energy-norm and goal-oriented adaptive algorithms. While the method can be applied to a variety of problems, in this Dissertation we first focus on one-dimensional (1D) problems, including Helmholtz and steady-state convection-dominated diffusion problems. Numerical results in 1D show that for the Helmholtz problem, it is advantageous to select the Laplace operator for the alternative error representation. Specifically, the upper bounds of the new error representation are sharper than the classical ones used in both energy-norm and goal-oriented adaptive methods, especially when the dispersion (pollution) error is significant. The 1D steady-state convection-dominated diffusion problem with homogeneous Dirichlet boundary conditions exhibits a boundary layer that produces a loss of numerical stability. The new error representation based on the Laplace operator delivers sharper error upper bounds. When applied to a p-GOA, the alternative error representation captures earlier the boundary layer, despite the existing spurious numerical oscillations. We then focus on the two- and three-dimensional (2D and 3D) Helmholtz equation. We show via extensive numerical experimentation that the upper bounds provided by the alternative error representations are sharper than the classical ones. When using the alternative error indicators, a naive p-adaptive process converges, whereas under the same conditions, the classical method fails and requires the use of the so-called Projection Based Interpolation (PBI) operator or some other technique to regain convergence. We also provide guidelines for finding operators delivering sharp error representation upper bounds., Basque Government Consolidated Research Group Grant IT649-13
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Global well-posedness and twist-wave solutions for the inertial Qian-Sheng model of liquid crystals

  • De Anna, F.
  • Zarnescu, A.
We consider the inertial Qian-Sheng model of liquid crystals which couples a hyperbolic-type equation involving a second-order material derivative with a forced incompressible Navier-Stokes system. We study the energy law and prove a global well-posedness result. We further provide an example of twist-wave solutions, that is solutions of the coupled system for which the flow vanishes for all times., Marie Sklodowska-Curie grant agreement No 642768, Romanian National Authority for Scientific Research and Innovation, CNCS-UEFISCDI, project number PN-II-RU-TE-2014-4-0657.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Fast 2.5D Finite Element Simulations of Borehole Resistivity Measurements

  • Rodriguez-Rozas, A.
  • Pardo, D.
  • Torres-Verdin, C.
We develop a rapid 2.5-dimensional (2.5D) finite element method for simulation of borehole resistivity measurements in transversely isotropic (TI) media. The method combines arbitrary high-order $H^1$ - and $H$ (curl)-conforming spatial discretizations. It solves problems where material properties remain constant along one spatial direction, over which we consider a Fourier series expansion and each Fourier mode is solved independently. We propose a novel a priori method to construct quasi-optimal discretizations in physical and Fourier space. This construction is based on examining the analytical (fundamental) solution of the 2.5D formulation over multiple homogeneous spaces and assuming that some of its properties still hold for the 2.5D problem over a spatially heterogeneous formation. In addition, a simple parallelization scheme over multiple measurement positions provides efficient scalability. Our method yields accurate borehole logging simulations for realistic synthetic examples, delivering simulations of borehole resistivity measurements at a rate faster than 0.05 s per measurement location along the well trajectory on a 96-core computer.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Goal-oriented adaptivity using unconventional error representations for the multi-dimensional Helmholtz equation

  • Darrigrand, V.
  • Rodríguez-Rozas, A.
  • Muga, I.
  • Pardo, D.
  • Romkes, A.
  • Prudhomme, S.
In goal‐oriented adaptivity, the error in the quantity of interest is represented using the error functions of the direct and adjoint problems. This error representation is subsequently bounded above by element‐wise error indicators that are used to drive optimal refinements. In this work, we propose to replace, in the error representation, the adjoint problem by an alternative operator. The main advantage of the proposed approach is that, when judiciously selecting such alternative operator, the corresponding upper bound of the error representation becomes sharper, leading to a more efficient goal‐oriented adaptivity. While the method can be applied to a variety of problems, we focus here on two‐ and three‐dimensional (2‐D and 3‐D) Helmholtz problems. We show via extensive numerical experimentation that the upper bounds provided by the alternative error representations are sharper than the classical ones and lead to a more robust p‐adaptive process. We also provide guidelines for finding operators delivering sharp error representation upper bounds. We further extend the results to a convection‐dominated diffusion problem as well as to problems with discontinuous material coefficients. Finally, we consider a sonic logging‐while‐drilling problem to illustrate the applicability of the proposed method., V. Darrigrand, A. Rodriguez-Rozas and D. Pardo were partially funded by the Projects of the Spanish Ministry of Economy and Competitiveness with reference MTM2013-40824-P, MTM2016-76329-R (AEI/FEDER, EU), MTM2016-81697-ERC and the Basque Government Consolidated Research Group Grant IT649- 13 on “Mathematical Modeling, Simulation, and Industrial Applications (M2SI)”. A. Rodriguez-Rozas and D.Pardo were also partially funded by the BCAM “Severo Ochoa” accreditation of excellence SEV-2013-0323 and the Basque Government through the BERC2014-2017 program. A. Rodriguez-Rozas acknowledges support from Spanish Ministry under Grant No. FPDI- 2013-17098. I. Muga was partially funded by the FONDECYT project 1160774. The first four authors were also partially funded by the European Union’s Horizon 2020, research and innovation program under the Marie Sklodowska-Curie grant agreement No 644202. Serge Prudhomme is grateful for the support by a Discovery Grant from the Natural Sciences and Engineering Research Council of Canada.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

RandomFront 2.3 A physical parametrisation of fire-spotting for operational fire spread models: Implementation in WRF-Sfire and response analysis with LSFire+

  • Trucchia, A.
  • Egorova, V.
  • Butenko, A.
  • Kaur, I.
  • Pagnini, G.
Fire-spotting is often responsible for a dangerous flare up in the wildfire and causes secondary ignitions isolated from the primary fire zone leading to perilous situations. The main aim of the present research to provide a versatile probabilistic model for fire-spotting that is suitable for implementation as a post-processing scheme at each time step in any of the existing operational large-scale wildfire propagation models, without calling for any major changes in the original framework. In particular, a complete physical parametrisation of fire-spotting is presented and the corresponding updated model RandomFront 2.3 is implemented in a coupled fire-atmosphere model : WRF-Sfire. A test case has been simulated and discussed. More- over, the results from different simulations with a simple model based on the Level Set Method, namely LSFire+, highlight the response of the parametrisation to varying fire intensities, wind conditions and different firebrand radii. The contribution of the firebrands towards increasing the fire perimeter varies according to different concurrent conditions and the simulations show results in agreement with the physical processes. Among the many rigorous approaches available in literature to model the firebrand transport and distribution, the approach presented here proves to be simple yet versatile for application to operational large-scale fire spread models., PhD grant "La Caixa 2014"
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A C 0 interior penalty discontinuous Galerkin Method for fourth-order total variation flow. II: Existence and uniqueness

  • Kumar, R.
  • Hoppe, R.H.W.
  • Bhandari, C.
We prove the existence and uniqueness of a solution of a C0 Interior Penalty Discontinuous Galerkin (C0 IPDG) method for the numerical solution of a fourth‐order total variation flow problem that has been developed in part I of the paper. The proof relies on a nonlinear version of the Lax‐Milgram Lemma. It requires to establish that the nonlinear operator associated with the C0 IPDG approximation is Lipschitz continuous and strongly monotone on bounded sets of the underlying finite element space.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fusion-based variational image dehazing

  • Galdran, Adrian
  • Vazquez-Corral, Javier
  • Pardo, David
  • Bertalmío, Marcelo
We propose a novel image-dehazing technique based on the minimization of two energy functionals and a fusion scheme to combine the output of both optimizations. The proposed fusion-based variational image-dehazing (FVID) method is a spatially varying image enhancement process that first minimizes a previously proposed variational formulation that maximizes contrast and saturation on the hazy input. The iterates produced by this minimization are kept, and a second energy that shrinks faster intensity values of well-contrasted regions is minimized, allowing to generate a set of difference-of-saturation (DiffSat) maps by observing the shrinking rate. The iterates produced in the first minimization are then fused with these DiffSat maps to produce a haze-free version of the degraded input. The FVID method does not rely on a physical model from which to estimate a depth map, nor it needs a training stage on a database of human-labeled examples. Experimental results on a wide set of hazy images demonstrate that FVID better preserves the image structure on nearby regions that are less affected by fog, and it is successfully compared with other current methods in the task of removing haze degradation from faraway regions., The work of J. Vazquez-Corral and M. Bertalmío was supported by the ERC Starting Grant 306337, by the FEDER Fund under Grant TIN2015-71537-P(MINECO/FEDER,UE), by the ICREA Academia Award, and by the Spanish government under Grant IJCI-2014-19516. The work of D. Pardo was supported by the Spanish government under Grant MTM2013-40824-P, by the BCAM Severo Ochoa accreditation of excellence SEV-2013-0323, and the Basque Government CRG Grant IT649-13.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced variational image dehazing

  • Galdran, Adrian
  • Vazquez-Corral, Javier
  • Pardo, David
  • Bertalmío, Marcelo
Images obtained under adverse weather conditions, such as haze or fog, typically/nexhibit low contrast and faded colors, which may severely limit the visibility within the scene. Unveiling/nthe image structure under the haze layer and recovering vivid colors out of a single image/nremains a challenging task, since the degradation is depth-dependent and conventional methods are/nunable to overcome this problem. In this work, we extend a well-known perception-inspired variational/nframework for single image dehazing. Two main improvements are proposed. First, we replace/nthe value used by the framework for the grey-world hypothesis by an estimation of the mean of/nthe clean image. Second, we add a set of new terms to the energy functional for maximizing the/ninter-channel contrast. Experimental results show that the proposed Enhanced Variational Image/nDehazing (EVID) method outperforms other state-of-the-art methods both qualitatively and quantitatively./nIn particular, when the illuminant is uneven, our EVID method is the only one that recovers/nrealistic colors, avoiding the appearance of strong chromatic artifacts., D. Pardo was partially funded by the Project of the Spanish Ministry of Economy and Competitiveness with reference MTM2013-40824-P, the BCAM “Severo Ochoa” accreditation of excellence SEV-2013-0323, the CYTED 2011 project 712RT0449, and the Basque Government/nConsolidated Research Group Grant IT649-13 on “Mathematical Modeling, Simulation, and Industrial Applications (M2SI)”.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Image processing applications through a variational perceptually-based color correction related to Retinex

  • Vazquez-Corral, Javier
  • Zamir, Syed Waqas
  • Galdran, Adrian
  • Pardo, David
  • Bertalmío, Marcelo
Comunicació presentada al IS&T International Symposium on Electronic Imaging, celebrat del 14 al 18 de febrer de 2016 a San Francisco (CA, USA) i organitzat per la Society for Imaging Science and Technology., The retinex theory of color vision has been a light of inspiration for color researchers since its inception 50 years ago. It has been adapted to work for different goals such as shadow removal, high dynamic range imaging, or computational color constancy. Back in 2007 a variational perceptually-based color correction model related to Retinex was presented by Bertalmío and colleagues. In this paper we first comment on this model and later we review different image processing applications that have been obtained by performing small modifications to it, namely color gamut mapping and image dehazing., J. Vazquez-Corral. S.W. Zamir, and M. Bertalmío were supported by European Research Council, Starting Grant ref. 306337, by the Spanish government, grant ref. TIN2012-38112, and by the Icrea Academia Award. D. Pardo was partially funded by the Project of the Spanish Ministry of Economy and Competitiveness with reference MTM2013-40824-P, the BCAM ”Severo Ochoa” accreditation of excellence SEV-2013-0323, the CYTED 2011 project 712RT0449, and the Basque Government Consolidated Research Group Grant IT649-13 on “Mathematical Modeling, Simulation, and Industrial Applications (M2SI)”.