Pasar al contenido principal

ANALISIS MATEMATICO Y SIMULACION NUMERICA DE PROBLEMAS EN MECANICA DE SOLIDOS. APLICACIONES A LA BIOMECANICA, MODELADO DE TENSIOACTIVOS Y TERMODINAMICA

MTM2015-66640-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE VIGO
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Interfacial tension measurements using a new axisymmetric drop/bubble shape technique

  • Cabrerizo Vílchez, Miguel Ángel
  • Fernández García, José Ramón
  • Fernández Rodríguez, Miguel Ángel
  • García Río, Luis
  • Muñiz Castiñeira, María del Carmen
  • Núñez García, Cristina
This paper introduces a new mathematical model that is used to compute either the interfacial tension of quiescent axisymmetric pendant/sessile drops and pendant/captive bubbles. This model consists of the Young–Laplace equation, that describes interface shape, together with suitable boundary conditions that guarantee a prescribed volume of drops/bubbles and a fixed position in the capillary. In order to solve the problem numerically, the Young–Laplace equation is discretized by using numerical differentiation and the numerical solutions are obtained applying the well-know Newton method. The paper contains a validation of the new methodology presented for what theoretical bubble/drops are used. Finally, some numerical results are presented for both drops and bubbles of water as well as several surfactant solutions to demonstrate the applicability, versatility and reproducibility of the proposed methodology
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Interfacial tension measurements using a new axisymmetric drop/bubble shape technique

  • Cabrerizo Vilchez, M. A
  • Fernández García, José Ramón
  • Fernández Rodríguez, M. A
  • García Rio, Luis
  • Muñiz Castiñeira, María del Carmen
  • Núñez González, Cristina
This paper introduces a new mathematical model that is used to compute either the interfacial tension of quiescent axisymmetric pendant/sessile drops and pendant/captive bubbles. This model consists of the Young–Laplace equation, that describes interface shape, together with suitable boundary conditions that guarantee a prescribed volume of drops/bubbles and a fixed position in the capillary. In order to solve the problem numerically, the Young–Laplace equation is discretized by using numerical differentiation and the numerical solutions are obtained applying the well-know Newton method. The paper contains a validation of the new methodology presented for what theoretical bubble/drops are used. Finally, some numerical results are presented for both drops and bubbles of water as well as several surfactant solutions to demonstrate the applicability, versatility and reproducibility of the proposed methodology., Ministerio de Economía y Competitividad | Ref. MTM2015-66640-P, Ministerio de Economía y Competitividad | Ref. CTQ2014-55208-P, Ministerio de Economía y Competitividad | Ref. CTQ2017-84354-P, Ministerio de Economía y Competitividad | Ref. PGC2018-096696-B-I00, Xunta de Galicia | Ref. GR 2007/085, Xunta de Galicia | Ref. IN607C 2016/03, Xunta de Galicia | Ref. ED431G/09
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Numerical analysis of a contact problem in poro‐thermoelasticity with microtemperatures

  • Bazarra García, Noelia
  • Fernández García, José Ramón
A dynamic contact problem, between a thermoelastic rod with voids and microtemperatures and a deformable obstacle, is numerically investigated in this work. The contact is modelled with a modification of the classical normal compliance contact condition. The mechanical problem consists of a coupled system of two hyperbolic partial differential equations and two parabolic ones. An existence and uniqueness result, and an energy decay property, are stated. Then, fully discrete approximations are introduced to approximate this nonlinear problem by using the finite element method and the implicit Euler scheme. A discrete stability property and a priori error estimates are proved, from which the linear convergence of the algorithm is derived. Finally, some numerical simulations are performed to demonstrate the accuracy of the approximation and the behaviour of the solution., Ministerio de Economía y Competitividad | Ref. MTM2015‐66640‐P
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Finite element study of a threaded fastening: the case of surgical screws in bone

  • López Campos, José Ángel
  • Segade Robleda, Abraham
  • Casarejos Ruiz, Enrique
  • Fernández García, José Ramón
  • Vilán Vilán, José Antonio
  • Izquierdo Belmonte, Pablo
This paper studies the stress state of a threaded fastening by using Finite Element (FE) models, applied to surgical screws in cortical bone. There is a general interest in studying the stress states induced in the different elements of a joint caused by the thread contact. Analytical models were an initial approach, and later FE models allowed detailed studies of the complex phenomena related to these joints. Different studies have evaluated standard threaded joints in machinery and structures, being the thread symmetric. However, surgical screws employ asymmetric thread geometry, selected to improve the stress level generated in the bone. Despite the interest and widespread use, there is scarce documentation on the actual effect of this thread type. In this work, we discuss the results provided by FE models with detailed descriptions of the contacts comparing differences caused by the materials of the joint, the thread geometry and the thread’s three-dimensional helical effects. The complex contacts at the threaded surfaces cause intense demand on computational resources that often limits the studies including these joints. We analyze the results provided by one commercial software package to simplify the threaded joints. The comparison with detailed FE models allows a definition of the level of uncertainty and possible limitations of this type of simplifications, and helps in making suitable choices for complex applications., Xunta de Galicia | Ref. GRC2015/016, Xunta de Galicia | Ref. ED481A-2017/045, Ministerio de Economía y Competitividad | Ref. MTM2015-66640-P