Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multidisciplinary approach to cylindrical anisotropic metamaterials

  • Carbonell Olivares, Jorge
  • Torrent Martí, Daniel
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Anisotropic characteristics of cylindrically corrugated microstructures are analyzed in terms of their acoustic and electromagnetic (EM) behavior paying special attention to their differences and similarities. A simple analytical model has been developed using effective medium theory to understand the anisotropic features of both types of waves in terms of radial and angular components of the wave propagation velocity. The anisotropic constituent parameters have been obtained by measuring the resonances of cylindrical cavities, as well as from numerical simulations. This permits one to characterize propagation of acoustic and EM waves and to compare the fundamental anisotropic features generated by the corrugated effective medium. Anisotropic coefficients match closely in both physics fields but other relevant parameters show significant differences in the behavior of both types of waves. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft., The authors acknowledge financial support from the Spanish MICINN (TEC 2010-19751 and Consolider CSD2008-00066) and from the US Office of Naval Research (N000140910554). DT also acknowledges support from the program 'Campus de Excelencia Internacional 2010 UPV'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Homogenization theory for periodic distributions of elastic cylinders embedded in a viscous fluid

  • Reyes Ayona, Edgar
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
A multiple-scattering theory is applied to study the homogenization of clusters of elastic cylinders distributed in a isotropic lattice and embedded in a viscous fluid. Asymptotic relations are derived and employed to obtain analytical formulas for the effective parameters of homogenized clusters in which the underlying lattice has a low filling fraction. It is concluded that such clusters behave, in the low frequency limit, as an effective elastic medium. Particularly, it is found that the effective dynamical mass density follows the static estimate; i.e., the homogenization procedure does not recover the non-linear behavior obtained for the inviscid case. Moreover, the longitudinal and transversal sound speeds do not show any dependence on fluid viscosity. Numerical simulations performed for clusters made of brass cylinders embedded in glycerin support the reliability of the effective parameters resulting from the homogenization procedure reported here. (C) 2012 Acoustical Society of America. [http://dx.doi.org/10.1121/1.4744933], This work was partially supported by the U.S. Office of Naval Research (Award No. N000140910554) and by the Spanish Ministry of Science and Innovation under Contracts Nos. TEC2010-19751 and CSD2008-66 (CONSOLIDER program). D. T. acknowledges a research grant provided by the program "Campus de Excelencia 2010 UPV."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electromagnetic absorption in anisotropic photonic crystal of alumina cylinders

  • Carbonell Olivares, Jorge
  • Arriaga, J.
  • Gumen, L.
  • Krokhin, A.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] We present a theoretical and experimental study of the effective permittivity of a photonic crystal (PC) made of parallel dielectric rods in the long-wavelength limit. Using the plane-wave expansion method we derive an analytical expression for the imaginary part of the dielectric tensor. Angular dependence of the dissipative part of permittivity turns out to be more complicated than that for the real part. In particular, it exhibits stronger anisotropy for a PC with rectangular unit cell. Theoretical and numerical results are compared to the experimental measurements of microwave reflection and transmission through a PC fabricated from low-loss alumina rods. A good agreement between the theory and experiment was obtained in the limit where the effective medium approximation is valid. © 2011 Elsevier B.V., This work was supported by the Ministerio de Ciencia e Innovación of Spain under contracts TEC 2007-67239, TEC 2010-19751 and CONSOLIDER CSD2008-00066, by the US Department of Energy through the Grant No. DE-FG02-06ER46312, and by the Office of Naval Research through the Grant No. 000140910554. L.G. acknowledges the support by CONACyT (Mexico) and A.K. acknowledges the support by the Ministerio de Educación of Spain Contract No. SAB2009-00009. Authors thank F. Cervera for technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound focusing by gradient index sonic lenses

  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Torrent Martí, Daniel
Gradient index sonic lenses based on two-dimensional sonic crystals are here designed, fabricated, and characterized. The index-gradient is achieved in these type of flat lenses by a gradual modification of the sonic crystal filling fraction along the direction perpendicular to the lens axis. The focusing performance is well described by an analytical model based on ray theory as well as by numerical simulations based on the multiple-scattering theory. (c) 2010 American Institute of Physics, Work partially supported by USA Office of Naval Research (Grant No. N000140910554) and by the Spanish MICIIN under Contract Nos. TEC2007-67239 and CSD2008-66 (CONSOLIDER program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic cloack for airborne sound by inverse design

  • García Chocano, Víctor Manuel
  • Sanchis, Lorenzo
  • Díaz Rubio, Ana
  • Martínez Pastor, Juan P.
  • Llopis Pontiveros, Rafael
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] This Letter presents practical realization of a two-dimensional low loss acoustic cloak for airborne sound obtained by inverse design. The cloak consists of 120 aluminum cylinders of 15 mm diameter surrounding the cloaked object¿a cylinder of diameter 22.5 cm. The position of each cylinder in the cloak is optimized using the data from two different techniques: genetic algorithm and simulated annealing. The operation frequency of this cloak is 3061 Hz with the bandwidth of about 100 Hz. Being a multi-step approach to the desired cloaking, the inverse design is also valid, in principle, for non-symmetric cylinders and even for three-dimensional objects. VC 2011 American Institute of Physics, Work supported by ONR under Award N000140910554 and the Spanish MCINN under Contract Nos. TEC2010-19751, TEC2008-06756-C03-03, and CSD2008-00066 (CONSOLIDER Program). L. S. thanks the fellowship provided by CSIC with number JAEDoc-08-00351.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radial Photonic Crystal for detection of frequency and position of radiation sources

  • Carbonell Olivares, Jorge
  • Torrent Martí, Daniel
  • Kirleis, M. A.
  • Pique, A.
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Based on the concepts of artificially microstructured materials, i.e. metamaterials, we present here the first practical realization of a radial wave crystal. This type of device was introduced as a theoretical proposal in the field of acoustics, and can be briefly defined as a structured medium with radial symmetry, where the constitutive parameters are invariant under radial geometrical translations. Our practical demonstration is realized in the electromagnetic microwave spectrum, because of the equivalence between the wave problems in both fields. A device has been designed, fabricated and experimentally characterized. It is able to perform beam shaping of punctual wave sources, and also to sense position and frequency of external radiators. Owing to the flexibility offered by the design concept, other possible applications are discussed., This work was supported in part by the Spanish Ministry of Science and Innovation under Grants TEC 2010-19751 and CSD2008-00066 (Consolider program) and by the U.S. Office of Naval Research under Grant N000140910554.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental realization of broadband tunable resonators based on anisotropic metafluids

  • Spiousas, Ignacio
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
This letter demonstrates the mechanical tuning of modes confined in two-dimensional acoustic cavities based on anisotropic metafluids. The employed metafluids have been designed with effective parameters such that the radial component of the sound speed tensor keeps constant and the acoustic impedance remains finite along the tuning. It is shown that mode frequencies can be mechanically down shifted to extremely low values. Experiments confirm the model predictions and let us to conclude that this type of resonators can be employed for the miniaturization of standard resonators based on isotropic fluids such as air. © 2011 American Institute of Physics., We acknowledge support from Office of Naval Research (Grant No. N00014-09-1-0554) and from the Spanish Ministerio de Ciencia e Innovacion under projects with Grant Nos. TEC2010-19751 and CSD2008-00066 (CONSOLIDER Program). D.T. acknowledges a fellowship provided by the program Campus de Excelencia Internacional 2010 UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of equivalent anisotropy arising from dual isotropic layers of acoustic media

  • Cai, Liang-Wu
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
The equivalence between a single mass-anisotropic layer and two isotropic layers is analyzed by studying two systems: one consists of an anisotropic layer sandwiched between two arbitrarily chosen isotropic media; and the other consists of two isotropic layers, of a total thickness equal to that of the anisotropic layer, sandwiched between the same pair of isotropic media. The equivalence is established by matching the transmission and reflection coefficients of the two systems for an arbitrarily chosen incident angle. The first-order equivalence leads to exactly the same set of relations as often quoted in the literature. However, it was concluded that a full second-order equivalence is not possible unless the incident is normal to the surface, or the materials are isotropic. One of the requirements for the second-order equivalence is that the two isotropic layers must have their impedances matched. Together with the first order equivalence requirements, this gives a complete set of conditions for determining all the materials properties of the two isotropic layers. On the other hand, the unattainable full second-order equivalence can be alleviated by a proper placement of layers: by placing the heavier layer adjacent to the medium of greater acoustic impedance. Numerical examples show that this remedy in fact is more important than following the partial requirement for the second order equivalence when the equivalent isotropic layers are used in acoustic cloaking applications. (C) 2012 Acoustical Society of America. [http://dx.doi.org/10.1121/1.4744927], The authors would like to acknowledge the support from the US Office of Naval Research under the Grants No. N00014-09-1-0546 (LWC) and N00014-09-1-0554 (JSD), and from the Spanish Ministerio de Ciencia e Innovacion under the projects No. TEC2010-19751 and CSD2008-00066 (CONSOLIDER Program). LWC also acknowledges a sabbatical fellowship provided by Spanish Ministry of Education with Reference No. SAB2010-0058.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple scattering formulation of two-dimensional acoustic and electromagnetic metamaterials

  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
A multiple scattering formulation of two-dimensional (2D) acoustic metamaterials is presented. This approach is comprehensive and can lead to frequency-dependent effective parameters (scalar bulk modulus and tensorial mass density), as it is possible to have not only positive or negative ellipsoidal refractive index, but also positive or negative hyperbolic refractive index. The correction due to multiple scattering interactions is included in the theory and it is demonstrated that its contribution is important only for lattices with high filling fractions. Since the surface fields on the scatterers are mainly responsible for the anomalous behavior of the resulting effective medium, complex scatterers can be used to engineer the frequency response. Anisotropic effects are also discussed within this formulation and some numerical examples are reported. A homogenization theory is also extended to electromagnetic wave propagation in 2D lattices of dielectric structures, where Mie resonances are found to be responsible for the metamaterial behavior. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft., This work was partially supported by the US Office of Naval Research under grant number N000140910554 and the Spanish Ministry of Science and Innovation under contract numbers TEC2010-19751 and CSD2008-66 (the CONSOLIDER program). Daniel Torrent also acknowledges support from the contract provided by the program 'Campus de Excelencia Internacional' 2010 UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gradient index lenses for flexural waves based on thickness variations

  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Torrent Martí, Daniel
This work presents a method for the realization of gradient index devices for flexural waves in thin plates. Unlike recent approaches based on phononic crystals, the present approach is based on the thickness-dependence of the dispersion relation of flexural waves, which is used to create gradient index devices by means of local variations of the plate's thickness. Numerical simulations of known circularly symmetrical gradient index lenses have been performed. These simulations have been done using the multilayer multiple scattering method and the results prove their broadband efficiency and omnidirectional properties. Finally, finite element simulations employing the full three-dimensional elasticity equations also support the validity of the designed approach. (c) 2014 AIP Publishing LLC., This work has been supported by the U.S. Office of Naval Research under Grant No. N000140910554.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Negative refraction and energy funneling by hyperbolic materials : an experimental demonstration in acoustics

  • García Chocano, Víctor Manuel
  • Christensen, Johan
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
This Letter reports the design, fabrication, and experimental characterization of hyperbolic materials showing negative refraction and energy funneling of airborne sound. Negative refraction is demonstrated using a stack of five holey Plexiglas plates where their thicknesses, layer separation, hole diameters, and lattice periodicity have been determined to show hyperbolic dispersion around 40 kHz. The resulting hyperbolic material shows a flat band profile in the equifrequency contour allowing the gathering of acoustic energy in a broad range of incident angles and its funneling through the material. Our demonstrations foresee interesting developments based on both phenomena. Acoustic imaging with subwavelength resolution and spot-size converters that harvest and squeeze sound waves irradiating from many directions into a collimated beam are just two possible applications among many., This work was partially supported by the Office of Naval Research (USA) under Grant No. N000140910554, and by the Ministerio de Economia y Competitividad (Spain) under Contract No. TEC2010-19751. J. C. gratefully acknowledges financial support from the Danish Council for Independent Research and a Sapere Aude Grant (12-134776).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Omnidirectional broadband insulating device for flexural waves in thin plates

  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Torrent Martí, Daniel
This work presents a gradient index device for insulating from vibrations a circular area of a thin plate. The gradient of the refractive index is achieved exploiting the thickness-dependence of the dispersion relation of flexural waves in thin plates. A well-like thickness profile in an annular region of the plate is used to mimic the combination of an attractive and repulsive potentials, focusing waves at its bottom and dissipating them by means of an absorptive layer placed on top. The central area is therefore isolated from vibrations, while they are dissipated at the bottom of the well. Simulations have been done using the multilayer multiple scattering method and the results prove their broadband efficiency and omnidirectional properties., This work has been supported by the U.S. Office of Naval Research under Grant No. N000140910554.