Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

User effect comparison between metal bezel antenna and planarinverted f-antenna for mobile terminal

  • Sonkki, Marko
  • Berg, M.
  • Salonen, E. T.
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
This article presents a novel metal bezel antenna structure and its performance in user vicinity. The antenna is designed by keeping in mind the insensitivity in usage environments. In the antenna structure, a mobile chassis and a bezel are combined as one antenna element. Symmetrical feeding is used to excite the antenna. The characteristics of the metal bezel are compared with those of a conventional planar inverted-F antenna in terms of user effect at E-GSM band (880-960 MHz). Both antennas are measured and compared with four different hand phantom grips representing a browsing mode. The grips are designed so that the chassis is under the hand phantom in different variable usage conditions. Results are compared in terms of S-11, total efficiency, total body loss, radiation efficiency, reflection loss, and in Smith chart presentation. Finally, antenna structures are compared with hand and head phantom measurements representing a calling mode. The comparison is done in terms of average total body loss. The used hand grips are the same as in the case of the hand phantom measurements., This work was supported by the Finnish Funding Agency for Technology and Innovation, Nokia Devices Oulu, Pulse Finland, and Universitat Politecnica de Valencia under project PAID-06-09-2868. The first author M. Sonkki would like to thank the Tauno Tonning Foundation and Universitat Politecnica de Valencia for financially supporting his research exchange in Valencia. He also wants to thank iTEAM laboratory engineers Antonio Vila-Jimenez and Bernardo Bernardo for helping with practical problems and manufacturing the prototype antenna.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Planar Wideband Antenna Element and its Usage in a Mobile MIMO System

  • Sonkki, Marko
  • Salonen, E.T.
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
A simple antenna structure for a multiple-input-multiple-output (MIMO) system in a mobile terminal with spatial diversity is presented. A single antenna element consists of a combination of an electric dipole and a square magnetic slot. The studies with a single quasi-complementary antenna element show that the electric dipole and the square-shaped magnetic slot are partially compensating the effect of the electric conductor closely spaced to the electric dipole (0.0037-0.01¿). Simulations also show that by scaling antenna structure, a 0.7-2.1-GHz frequency bandwidth can be achieved. The measured -6-dB impedance bandwidth of the MIMO antenna prototype is from 2.0 to 5.6 GHz, corresponding to a 95% relative bandwidth. The measured S 21 is less than -19 dB within the -6-dB impedance bandwidth. The average measured total efficiency at the aforementioned bandwidth is -0.85 dB. The measured radiation patterns are presented at 2 and 5 GHz with a maximum total gain of 2.8 and 5.7 dBi, respectively. The measured envelope correlation of the MIMO antenna is less than 0.04 with 90% MIMO efficiency within the -6-dB impedance bandwidth. © 2002-2011 IEEE., This work was supported by the Finnish Funding Agency for Technology and Innovation, Nokia Devices Oulu, Pulse Finland, and Universitat Politecnica de Valencia under Project PAID-06-09-2868. The work of M. Sonkki was supported by the Tauno Tonning Foundation and Universitat Politecnica de Valencia.