Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of the voltammetric tongue in fresh cod (Gadus morhua) quality assessment

  • Ruiz Rico, María
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
The aimof this work was to evaluate the use of the voltammetric tongue in the shelf-life assessment of fresh cod in cold storage. For this purpose, physico-chemical and microbial analyseswere carried out, as well as measurements with the electronic tongue. The samples exceeded the acceptability limits of total volatile basic nitrogen (TVB-N), mesophilic and Enterobacteriaceae on the fourth day of storage, which means that the fish had a shelf-life of less than 4 days. The voltammetric tongue was able to differentiate between days 0 and 1 of storage from the other days. These results are in accordance with those obtained in the physico-chemical and microbial analyses, which showed a clear loss of freshness from day 0 to day 4. In the models obtained with partial least squares for TVB-N and mesophilic counts, the predicted values were successfully fitted to the experimental values, which confirm the potential usefulness of the voltammetric tongue for assessing cod spoilage. Industrial relevance: Shelf-life assessment of fresh fish is of great interest for consumers, industries and authorities. The current methods used for this purpose are tedious, expensive, time-consuming and require skilled personnel. Therefore, the development of rapid non-destructive quality control techniques, which can be applied at any stage of the supply chain, could be highly interesting. This paper describes the possible application of a voltammetric tongue to assess cod spoilage during cold storage. This technique could be used as a rapid and non-destructive method applicable to routine quality control at any stage of the supply chain., The authors are grateful for the financial support received for the work reported here from the Universidad Politecnica de Valencia (PAID-06-09-2940) and MICINN (MAT2009-14564-004-02). A Fuentes would also like to thank the Campus de Excelencia Internacional at the Universidad Politecnica de Valencia for its support. The proof-reading of the paper was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a new salmon salting smoking method and process monitoring by impedance spectroscopy

  • Rizo Párraga, Arancha María
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
[EN] In this work two objectives were proposed: (i) to optimize a new salmon salting smoking method using vacuum packaging and (ii) to evaluate the application of impedance spectroscopy (IS) to the on-line monitoring of the process. Different processing conditions were evaluated (4 smoke flavoring (SF) salt concentrations, 3 salting times, salting in vacuum or in air). Physico-chemical analyses and IS measurements were performed with three different sensors during the process. Salting with 16 g SF salt/100 g fish in vacuum packaging provided smoked salmon similar to products currently available on the market. This new method has the advantages of reducing processing times and waste. IS measurements were carried out by three different electrodes. The most appropriate sensor for process monitoring was a needle electrode, with which robust prediction models for NaCl content, moisture and a,,, during the salting smoking process were obtained. The results showed the potential of IS as a rapid on-line monitoring method of the salmon salting smoking process. (C) 2012 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the financial support for the work reported here received from the Generalitat Valenciana (GV/2011/098) and the Universitat Politecnica de Valencia (UPV) (PAID-06-09-2940). A. Fuentes would like to thank the Campus de Excelencia Internacional at the UPV for its support. The proof-reading of this paper was funded by the UPV, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differentiation between fresh and frozen-thawed sea bream (Sparus aurata) using impedance spectroscopy techniques

  • Fuentes López, Ana|||0000-0002-4144-2396
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Ruiz Rico, María
The aim of this study was to evaluate a rapid, low-cost and easy-to-use system of impedance spectroscopy with two different electrodes (double electrode (DE) and arrowhead (AH)) to distinguish between fresh and frozen-thawed sea bream. Samples of fresh sea bream and those submitted to freezing at −18 °C and to 2 freezing cycles, kept in frozen storage for different periods of time, were evaluated. The freezing process did not affect moisture, pH, TVB-N, or the microbial quality. However, it provoked a slight degradation of IMP, a slight increase in the TBA index and a decrease of the WHC and several textural parameters. All these changes were detected with the impedance spectroscopy using the DE, which could differentiate fresh sea bream from frozen-thawed samples. However, the AH could not discriminate between the different types of samples. The frozen storage time (15, 30 or 60 days) did not have any effect on the microbial and physico-chemical parameters evaluated, or on the electrical properties of the muscle. Industrial relevance: To prevent unfair competition by false labelling, differentiating between fresh fish or that which has previously been frozen is an important issue of authenticity in the seafood sector. The use of impedance spectroscopy could provide a new approach to the development of small and portable instruments for frozen-thawed fish detection. Impedance spectroscopy could be a promising method for industrial use, authorities and quality control. The present work evaluates a rapid, low cost and easy-to-use system, based on impedance spectroscopy in order to differentiate between fresh and frozen-thawed sea bream. This method could be applied during any stage of fish marketing, facilitating quality control activities and the detection of fraud in the fish sector., The authors gratefully acknowledge that the experiment reported here has been financially supported by the Universitat Politecnica de Valencia (PAID-06-09-2940). A. Fuentes would like to thank the Campus de Excelencia Internacional at the Universitat Politecnica de Valencia for its support. This paper's editing has been funded by the Universitat Politecnica de Valencia, Spain.